COM_AKEEBABACKUP="Akeeba Backup <small>for Joomla!&trade;</small>"
COM_AKEEBABACKUP_CORE="Akeeba Backup CORE <small>for Joomla!&trade;</small>"
COM_AKEEBABACKUP_PRO="Akeeba Backup Professional <small>for Joomla!&trade;</small>"

COM_AKEEBABACKUP_ALICE="Troubleshooter - ALICE"
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_HEAD="Log analysis is complete"
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_ERROR="Detected Error"
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_ERRORHELP="If you do not understand what the error above means and you have an active support subscription on our site please file a support request including all of the text on this page. This will let us help you most efficiently. Thank you!"
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_NEXTSTEPS="If the solution presented above did not help you solve your issue and you have an active support subscription on our site please file a support request including: 1. a ZIP file with your backup log file; and 2. the text on this page. Please do not include <em>only</em> this information, it will make our replies slower and less accurate. Do try to also describe your backup issue in more detail such as why you believe there is a problem, when the problem started happening, any corrective steps you took yourself and any information you think would be relevant in helping us better understand what is going on."
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_SOLUTION="Possible solution:"
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_SUMMARY="ALICE finished its log analysis. A total of %d different checks were executed."
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_SUMMARY_ERRORS="We detected a major issue which may have caused your backup to fail."
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_SUMMARY_SUCCESS="No backup issues were detected."
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_SUMMARY_WARNINGS="We only detected some minor issues which typically do not cause backup failure."
COM_AKEEBABACKUP_ALICE_ANALYSIS_REPORT_LBL_WARNINGS="Detected Warnings"
COM_AKEEBABACKUP_ALICE_ANALYZE="Analyse Log"
COM_AKEEBABACKUP_ALICE_AUTORUN_NOTICE="Please hold on. Your log will start being analysed shortly."
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM="Checking filesystem errors"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_DIRECTORIES="Large directories"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_DIRECTORIES_ERROR="The following directories have a very large number of elements: \n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_DIRECTORIES_SOLUTION="You should switch the scan engine to <strong>Large Site Scanner</strong>"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_FILES="Large files issues"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_FILES_ERROR="The following files are too big and can cause backup issues: \n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_LARGE_FILES_SOLUTION="Please try excluding these files using the Files and Directories Exclusion feature or delete them if you are sure you don't need them on your site."
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_MULTIPLE_SITES="Multiple Joomla! installations"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_MULTIPLE_SITES_ERROR="Found Joomla! installations in the following subdirectories: \n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_MULTIPLE_SITES_SOLUTION="You should exclude these subdirectories since they could lead to timeout issues."
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_OLD_BACKUPS="Old backups included"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_OLD_BACKUPS_ERROR="The following old backups are included in the current backup: \n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_FILESYSTEM_OLD_BACKUPS_SOLUTION="Delete or exclude those from the backup."
COM_AKEEBABACKUP_ALICE_ANALYZE_LABEL_PROGRESS="Analysis progress"
COM_AKEEBABACKUP_ALICE_ANALYZE_RAW_OUTPUT="The log analyzer has detected one or more backup issues. If following this log analyzer's suggestions and our troubleshooting documentation's instructions doesn't work and you have an active subscription on our site please file a new ticket pasting the following <em>log analysis text output</em> to help us provide you with faster support."
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS="Checking system requirements"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DATABASE="Database type and version"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DATABASE_SOLUTION="Akeeba Backup only supports MySQL 5.0.47 or later"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DATABASE_UNKNOWN="We could not detect your database type. Detected type: %s"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DATABASE_UNSUPPORTED="Your database server is not supported, yet. Detected database type: %s"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DATABASE_VERSION_TOO_OLD="Database version too old. Detected version: %s"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DBPERMISSIONS="Database permissions"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DBPERMISSIONS_ERROR="It seems that you can't execute SHOW TABLE and/or SHOW VIEW statements on your database."
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_DBPERMISSIONS_SOLUTION="Please contact your host"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_MEMORY="Available memory"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_MEMORY_SOLUTION="Please contact your host and ask them for instructions to increase your PHP memory limit."
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_MEMORY_TOO_FEW="Akeeba Backup needs at least 16Mb of available memory. Detected available memory: %sMb"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_PHP_VERSION="PHP version"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_PHP_VERSION_ERR_TOO_OLD="PHP Version too old. Detected version: %s"
COM_AKEEBABACKUP_ALICE_ANALYZE_REQUIREMENTS_PHP_VERSION_SOLUTION="Akeeba Backup needs PHP 5.6 or PHP 7"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIMEERRORS="Checking runtime errors"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_CORRUPTED_INSTALL="Installation integrity"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_CORRUPTED_INSTALL_ERROR="It seems that your installation is broken. This could happen when the host applies very strict security rules, mistakenly identifying Akeeba Backup files as security threats and deleting or renaming them without asking you."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_CORRUPTED_INSTALL_SOLUTION="Please re-install Akeeba Backup <strong>without uninstalling it</strong>. If this doesn't help please contact your host at once."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_JSAME="Additional database - Joomla database inclusion"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_JSAME_ERROR="You added Joomla database as additional database; some server could refuse a second connection to the same db, resulting in a backup error"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_JSAME_SOLUTION="Remove Joomla database from the additional databases"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_NO_PROFILE="Could not detect the used profile, test skipped"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_WRONG="Additional database - Wrong access details"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_WRONG_ERROR="One (or more) additional database has invalid access details"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_DBADD_WRONG_SOLUTION="Please review the connection details of additional databases"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_ERRORFILES="Error log files"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_ERRORFILES_FOUND="Error log files are included inside archive backup:<br/>%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_ERRORFILES_SOLUTION="You can exclude these files using the following regular expression: <strong>#(/php_error_cpanel\.|php_error_cpanel\.|/error_)log#</strong>"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_FATALERROR="Fatal errors"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_FATALERROR_ERROR="The following fatal error happened while taking a backup. Please review and fix it before continuing: \n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_FATALERROR_SOLUTION="If you do not understand what this means and you have an active subscription to our site, please file a new support ticket making sure that 1. you have ZIPped and attached the backup log file and 2. you have pasted the text output visible at the top of this page."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_KETTENRAD="Backup engine state saving issues"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_KETTENRAD_SOLUTION="It seems that a single request was processed more than once by your server. This leads to failures during the backup process or corrupted archives; you should contact your host and report this issue."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_KETTENRAD_STARTING_MORE_ONCE="Trying to start step %s more than once."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_PART_SIZE="Post-processing engine and archive part size"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_PART_SIZE_ERROR="A post-processing engine is found, but no part size is set; this could lead to timeout issues"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_PART_SIZE_SOLUTION="Set a part size inside backup profile configuration."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TIMEOUT="Timeout while backing up"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TIMEOUT_KETTENRAD_BROKEN="There is already an issue with the backup engine saving its state. Please fix it before continuing."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TIMEOUT_MAX_EXECUTION="The backup script reached a timeout limit. Detected timeout: %s"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TIMEOUT_SOLUTION="Please try setting min execution time to 1, max execution time to 10 seconds (or if the PHP timeout is less than 10 seconds, use 75% of the PHP timeout), runtime bias 75%"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYDBS="Number of tables being saved"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYDBS_ERROR="You are trying to backup too many tables. Please avoid backing up different Joomla! installation at once."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYDBS_SOLUTION="You can exclude non-core tables using the following regular expression: <strong>!/^#__/</strong>"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYROWS="Table row count"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYROWS_ERROR="You are trying to backup tables with a lot of rows (more than 1 million):\n%s"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYROWS_ROWS="rows"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYROWS_SOLUTION="You should exclude these tables using the <strong>Database Tables Exclusion</strong> feature"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_TOOMANYROWS_TABLE="Table"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_WINCANTAPPEND="Backup archive writing issues"
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_WINCANTAPPEND_ERROR="Could not open archive file for append."
COM_AKEEBABACKUP_ALICE_ANALYZE_RUNTIME_ERRORS_WINCANTAPPEND_SOLUTION="Please check if you have enough disk space, or if resources are being depleted or if you need to prevent system (Windows) backup and antivirus scanning while the backup takes place."
COM_AKEEBABACKUP_ALICE_ERR_ANALYZEFAILED_HEADER="Log analysis failed"
COM_AKEEBABACKUP_ALICE_ERR_ANALYZEFAILED_INFO="The log analysis has been halted. The log analyzer reported the following error:"
COM_AKEEBABACKUP_ALICE_ERR_CANNOT_OPEN_LOGFILE="Log file analysis failed: could not open log file %s for reading."
COM_AKEEBABACKUP_ALICE_HEADER_CHECK="Check performed"
COM_AKEEBABACKUP_ALICE_HEADER_RESULT="Result"

COM_AKEEBABACKUP_ALICE_ERR_NOLOGS="No log files for <strong>failed</strong> backups were found."
COM_AKEEBABACKUP_ALICE_HEAD_ONLYFAILED="ALICE only works on <em>failed</em> backups"
COM_AKEEBABACKUP_ALICE_LBL_ONLYFAILED_SHOWINGLOGS="ALICE is a tool to analyze the log files of <em>failed</em> backups and — in most cases — give you the most likely cause for the backup failure. It is not meant to analyse the log files of successful backups. Doing that would return nonsensical, misleading or outright wrong results. For this reason we will only show you the log files of <em>failed</em> backups."
COM_AKEEBABACKUP_ALICE_LBL_ONLYFAILED_WHATISFAILED="Please remember that backups which didn't finish uploading the backup archive to remote storage are not failed. The root cause for these problems cannot be detected by ALICE anyway. If you have this kind of problem you need to file a support ticket in our site's Support section. If someone else installed Akeeba Backup Professional for you on your site please contact that person instead; you won't be able to file a support ticket on our site in this case."
COM_AKEEBABACKUP_ALICE_LBL_ONLYFAILED_IFNOFAILED="If your backup failed but you do not see it on this page please wait for <em>three (3) minutes</em>, go back to the Akeeba Backup Control Panel page and then come back here. There's a reason for that. In some cases the backup failure is caused by a server error. In these cases the backup is marked as still-in-progress instead of failed since PHP stops running, therefore our PHP code which would mark the backup as failed doesn't get the chance to run. When you visit the Control Panel page any backup marked as still-in-progress for more than 3 minutes will be marked as failed. Hence the need to wait and <em>then</em> go back to the Control Panel page."

COM_AKEEBABACKUP_BACKUP="Backup Now"
COM_AKEEBABACKUP_BACKUP_ANALYSELOG="Analyse Log File (ALICE)"
COM_AKEEBABACKUP_BACKUP_ANGIE_PASSWORD_WARNING_1="Your backup restoration script (ANGIE) will only be accessible if you provide the password you have set up in the previous page, before clicking the Backup Now button. If you don't remember setting up a password, your browser has auto-completed the password on the Configuration page <strong>without asking you</strong>. This is done by many password managers and browsers."
COM_AKEEBABACKUP_BACKUP_ANGIE_PASSWORD_WARNING_2="Modern browsers and password managers do not allow us to override this behaviour. We have put a JavaScript defense against this kind of non-consensual auto-filling of the password field in the Configuration page. However, if you save the Configuration page within approximately half a second after it loads this defense will not have a chance to run."
COM_AKEEBABACKUP_BACKUP_ANGIE_PASSWORD_WARNING_HEADER="WARNING: You have set up an ANGIE password"
COM_AKEEBABACKUP_BACKUP_DEFAULT_DESCRIPTION="Backup taken on"
COM_AKEEBABACKUP_BACKUP_ERROR_UNWRITABLEOUTPUT_AUTOBACKUP="The automatic backup can not be started because your output directory is not writable. Please follow the instructions below to fix this issue."
COM_AKEEBABACKUP_BACKUP_ERROR_UNWRITABLEOUTPUT_COMMON="In order to fix this issue, please go to the <a href=\"%s\">Configuration Page</a> and set the Output Directory to <code>[DEFAULT_OUTPUT]</code> (all caps, including the brackets). If this still doesn't work, please take a look <a href=\"%s\">at our troubleshooting instructions</a>"
COM_AKEEBABACKUP_BACKUP_ERROR_UNWRITABLEOUTPUT_NORMALBACKUP="Akeeba Backup can not take a backup of your site because the output directory is not writable. Please follow the instructions below to fix this issue."
COM_AKEEBABACKUP_BACKUP_ERROR_PROFILE_NO_ACCESS="You do not have access to this backup profile."
COM_AKEEBABACKUP_BACKUP_HEADER_BACKUPFAILED="Backup Failed"
COM_AKEEBABACKUP_BACKUP_HEADER_BACKUPFINISHED="Backup Completed Successfully"
COM_AKEEBABACKUP_BACKUP_HEADER_BACKUPRETRY="Backup Halted and Will Resume Automatically"
COM_AKEEBABACKUP_BACKUP_HEADER_BACKUPWITHRETURNURLFINISHED="The process was completed successfully"
COM_AKEEBABACKUP_BACKUP_HEADER_STARTNEW="Start a new backup"
COM_AKEEBABACKUP_BACKUP_LABEL_COMMENT="Backup comment"
COM_AKEEBABACKUP_BACKUP_LABEL_COMMENT_HELP="This will appear in both the Manage Backups page and inside the backup archive (in the installation/README.html file) for your convenience."
COM_AKEEBABACKUP_BACKUP_LABEL_DESCRIPTION="Short description"
COM_AKEEBABACKUP_BACKUP_LABEL_DESCRIPTION_HELP="This will appear in the Manage Backups page for your convenience."
COM_AKEEBABACKUP_BACKUP_LABEL_DETECTEDQUIRKS="Akeeba Backup may not work as expected"
COM_AKEEBABACKUP_BACKUP_LABEL_DOMAIN_FINISHED="Finalising the backup process"
COM_AKEEBABACKUP_BACKUP_LABEL_DOMAIN_INIT="Initialising backup process"
COM_AKEEBABACKUP_BACKUP_LABEL_DOMAIN_INSTALLER="Embedding the installer in the archive"
COM_AKEEBABACKUP_BACKUP_LABEL_DOMAIN_PACKDB="Backing up databases"
COM_AKEEBABACKUP_BACKUP_LABEL_DOMAIN_PACKING="Backing up files"
COM_AKEEBABACKUP_BACKUP_LABEL_PROGRESS="Backup Progress"
COM_AKEEBABACKUP_BACKUP_LABEL_QUIRKSLIST="Akeeba Backup detected the following potential problems:"
COM_AKEEBABACKUP_BACKUP_LABEL_RESTORE_DEFAULT="Restore default"
COM_AKEEBABACKUP_BACKUP_LABEL_START="Backup Now!"
COM_AKEEBABACKUP_BACKUP_LABEL_WARNINGS="Warnings"
COM_AKEEBABACKUP_BACKUP_LBL_UPGRADENAG="Tired of seeing this page? You can automate your backups with Akeeba Backup Professional."
COM_AKEEBABACKUP_BACKUP_STATS="Backup Statistics"
COM_AKEEBABACKUP_BACKUP_STATUS_NONE="No backup taken"
COM_AKEEBABACKUP_BACKUP_TEXT_AVGWARNING="You are running AVG Antivirus with Link Scanner enabled. This is known to cause backup issues. Please disable the Link Scanner feature if you run into any problems.\n\nAre you sure you want to continue despite this warning?"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKINGUP="Please <strong>DO NOT</strong> browse to another page, switch to another browser tab / window, or switch to <em>a different application</em> unless you see a completion or error message. Make sure your device does not go into sleep mode while the backup is in progress."
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPFAILED="The backup operation has been halted because an error was detected.<br />The last error message was:"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPFAILEDRETRY="The backup operation has been halted because an error was detected. However, Akeeba Backup will attempt to resume the backup. If you do not want to resume the backup please click the Cancel button below."
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPFINISHED="Backup finished on"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPHALT="Backup halted"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPHALT_DESC="The backup will resume in %d seconds"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPRESUME="Backup resumed on"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPSTARTED="Backup started on"
COM_AKEEBABACKUP_BACKUP_TEXT_BACKUPWARNING="The backup raised a warning"
COM_AKEEBABACKUP_BACKUP_TEXT_BTNRESUME="Resume"
COM_AKEEBABACKUP_BACKUP_TEXT_CONGRATS="Congratulations! The backup process has completed successfully.<br/>You can now navigate to another page."
COM_AKEEBABACKUP_BACKUP_TEXT_LASTERRORMESSAGEWAS="For your information, the last error message was:"
COM_AKEEBABACKUP_BACKUP_TEXT_LASTRESPONSE="Last server response %ss ago"
COM_AKEEBABACKUP_BACKUP_TEXT_PLEASEWAITFORREDIRECTION="Please wait; you are being redirected to the next page.<br/>This may take 5-30 seconds, depending on your Internet connection."
COM_AKEEBABACKUP_BACKUP_TEXT_READLOGFAIL="Please click the 'View Log' button on the toolbar to view the Akeeba Backup log file for further information."
COM_AKEEBABACKUP_BACKUP_TEXT_READLOGFAILPRO="Please click the 'Analyse Log' button below have Akeeba Backup analyse its log file for further information."
COM_AKEEBABACKUP_BACKUP_TEXT_RTFMTOSOLVE="We strongly recommend going through the step-by-step instructions in our <a href=\"%s\">troubleshooting wizard</a> to easily resolve this issue yourself."
COM_AKEEBABACKUP_BACKUP_TEXT_RTFMTOSOLVEPRO="Following the suggestions of ALICE, our log analyser, may not be enough. The automatic log analyser cannot cover all possible problem cases."
COM_AKEEBABACKUP_BACKUP_TEXT_SOLVEISSUE_CORE="If this doesn't help, you may consider <a href=\"%s\">buying a subscription</a> so that you can ask for support in our <a href=\"%s\">support ticket system</a>."
COM_AKEEBABACKUP_BACKUP_TEXT_SOLVEISSUE_LOG="If you do post to our ticket system, please remember to ZIP and attach your <a href=\"%s\">backup log file</a> in your post so that we can help you faster."
COM_AKEEBABACKUP_BACKUP_TEXT_SOLVEISSUE_PRO="If this doesn't help, please do not hesitate to ask for support in our <a href=\"%s\">support ticket system</a>. Do note that you need an active subscription to request assistance through the ticket system. If Akeeba Backup Professional was installed on your site by a third party -e.g. your web developer- please do not contact Akeeba Ltd for support. Instead, contact the person who installed the software on your site and request assistance to solve this issue."
COM_AKEEBABACKUP_BACKUP_TEXT_WILLRETRY="The backup will resume in"
COM_AKEEBABACKUP_BACKUP_TEXT_WILLRETRYSECONDS="seconds"
COM_AKEEBABACKUP_BACKUP_TROUBLESHOOTINGDOCS="Troubleshooting Documentation"

COM_AKEEBABACKUP_BROWSER_ERR_BASEDIR="The specified directory is subject to open_basedir restrictions. It can neither be used for backup output, nor its contents, if any, can be listed."
COM_AKEEBABACKUP_BROWSER_ERR_NONROOT="Note: This directory is outside your site's root. Its contents may be unreadable."
COM_AKEEBABACKUP_BROWSER_ERR_NOTEXISTS="The specified directory doesn't exist!"
COM_AKEEBABACKUP_BROWSER_LBL_GO="Go"
COM_AKEEBABACKUP_BROWSER_LBL_GOPARENT="&lt;up one level&gt;"
COM_AKEEBABACKUP_BROWSER_LBL_USE="Use"

COM_AKEEBABACKUP_BUADMIN="Manage Backups"
COM_AKEEBABACKUP_BUADMIN_TABLE_CAPTION="Table of backup attempts"
COM_AKEEBABACKUP_BUADMIN_SORT_BACKUPSTART_ASC="Backup start ascending"
COM_AKEEBABACKUP_BUADMIN_SORT_BACKUPSTART_DESC="Backup start descending"
COM_AKEEBABACKUP_BUADMIN_BTN_DONTSHOWTHISAGAIN="Got it!"
COM_AKEEBABACKUP_BUADMIN_BTN_REMINDME="Remind me next time"
COM_AKEEBABACKUP_BUADMIN_ERROR_INVALIDDOWNLOAD="Can't download the file of the specified backup record"
COM_AKEEBABACKUP_BUADMIN_ERROR_INVALIDID="Invalid backup record identifier"
COM_AKEEBABACKUP_BUADMIN_ERR_CANNOT_DELETE_ARCHIVES="Could not delete backup archive files. Please check the permissions."
COM_AKEEBABACKUP_BUADMIN_N_ITEMS_PUBLISHED_1="The backup record was frozen."
COM_AKEEBABACKUP_BUADMIN_N_ITEMS_PUBLISHED="%d backup records were frozen."
COM_AKEEBABACKUP_BUADMIN_N_ITEMS_UNPUBLISHED_1="The backup record was unfrozen."
COM_AKEEBABACKUP_BUADMIN_N_ITEMS_UNPUBLISHED="%d backup records were unfrozen."
COM_AKEEBABACKUP_BUADMIN_FROZENRECORD_ERROR="Can not perform selected action to a frozen record"
COM_AKEEBABACKUP_BUADMIN_LABEL_ACTION_FREEZE="Freeze record"
COM_AKEEBABACKUP_BUADMIN_LABEL_ACTION_UNFREEZE="Unfreeze record"
COM_AKEEBABACKUP_BUADMIN_LABEL_COMMENT="Comment"
COM_AKEEBABACKUP_BUADMIN_LABEL_DELETEFILES="Delete Files"
COM_AKEEBABACKUP_BUADMIN_LABEL_DESCRIPTION="Description"
COM_AKEEBABACKUP_BUADMIN_LABEL_DURATION="Duration"
COM_AKEEBABACKUP_BUADMIN_LABEL_FROZEN="Frozen"
COM_AKEEBABACKUP_BUADMIN_LABEL_FROZEN_FROZEN="Frozen"
COM_AKEEBABACKUP_BUADMIN_LABEL_FROZEN_SELECT="– Frozen –"
COM_AKEEBABACKUP_BUADMIN_LABEL_FROZEN_UNFROZEN="Unfrozen"
COM_AKEEBABACKUP_BUADMIN_LABEL_HOWDOIRESTORE_LEGEND="How do I restore my backups?"
COM_AKEEBABACKUP_BUADMIN_LABEL_HOWDOIRESTORE_TEXT_CORE="<p>You can restore your backups on any server, even a different one than the one you took your backup on. Follow our <a href=\"%s\" target=\"_blank\">video tutorial</a>. You will need to <a href=\"%3$s\" target=\"_blank\">download Akeeba Kickstart Core (free of charge)</a> to extract the backup archives, just like the tutorial tells you to do.</p>"
COM_AKEEBABACKUP_BUADMIN_LABEL_HOWDOIRESTORE_TEXT_CORE_INFO_ABOUT_PRO="<strong>It <em>can</em> be easier than this.</strong>You can restore backup archives on the same or a different server from Akeeba Backup's interface. No need to transfer files yourself. Find out about these and many more features available exclusively in <a href=\"%s\">Akeeba Backup Professional</a>!"
COM_AKEEBABACKUP_BUADMIN_LABEL_HOWDOIRESTORE_TEXT_PRO="<p>It's easy! Select the check box next to a backup entry. Now click on the <em>Restore</em> button in the toolbar.</p><p>If you want to restore to a new, public server you can use the <a href=\"%2$s\">Site Transfer Wizard</a>. If you'd rather do it manually or restore to your own computer or Intranet please watch our <a href=\"%1$s\" target=\"_blank\">video tutorial</a> and <a href=\"%3$s\" target=\"_blank\">download Akeeba Kickstart Core (free of charge)</a>  to extract the backup archives.</p>"
COM_AKEEBABACKUP_BUADMIN_LABEL_ID="ID"
COM_AKEEBABACKUP_BUADMIN_LABEL_MANAGEANDDL="Manage &amp; Download"
COM_AKEEBABACKUP_BUADMIN_LABEL_NODESCRIPTION="(no description)"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN="Origin"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_BACKEND="Backend"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_CLI="Command-line"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_FRONTEND="Frontend"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_JSON="JSON API"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_JOOMLA="Joomla Scheduled Tasks"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_JOOMLACLI="Joomla Scheduled Tasks (CLI–only)"
COM_AKEEBABACKUP_BUADMIN_LABEL_ORIGIN_SELECT="– Origin –"
COM_AKEEBABACKUP_BUADMIN_LABEL_PART="Part %02d"
COM_AKEEBABACKUP_BUADMIN_LABEL_PROFILEID="Profile"
COM_AKEEBABACKUP_BUADMIN_LABEL_REMOTEFILEMGMT="Manage remotely stored files"
COM_AKEEBABACKUP_BUADMIN_LABEL_RESTORE="Restore"
COM_AKEEBABACKUP_BUADMIN_LABEL_SIZE="Size"
COM_AKEEBABACKUP_BUADMIN_LABEL_START="Backup Start Time"
COM_AKEEBABACKUP_BUADMIN_LABEL_END="Backup End Time"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS="Status"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_COMPLETE="Finished"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_FAIL="Failed"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_OBSOLETE="Obsolete"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_OK="OK"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_PENDING="Pending"
COM_AKEEBABACKUP_BUADMIN_LABEL_STATUS_REMOTE="Remote"
COM_AKEEBABACKUP_BUADMIN_LABEL_TYPE="Type"
COM_AKEEBABACKUP_BUADMIN_LABEL_FROM_DATE="Backup taken after"
COM_AKEEBABACKUP_BUADMIN_LABEL_TO_DATE="Backup taken before"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVEEXISTS="Is my backup archive still available on my server?"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVENAME="What's it called?"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVENAME_PAST="What was it called?"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVEPATH="Where can I find it on my server?"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVEPATH_PAST="Where was it on my server?"
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVEPARTS_1="Your backup consists of one file."
COM_AKEEBABACKUP_BUADMIN_LBL_ARCHIVEPARTS="Your backup consists of %d files."
COM_AKEEBABACKUP_BUADMIN_LBL_BACKUPINFO="Backup Archive Information"
COM_AKEEBABACKUP_BUADMIN_LBL_DOWNLOAD_PARTS="Your backup consists of %d part files. You <em>must</em> download all of them and put them in the same directory for the archive extraction and backup restoration to succeed."
COM_AKEEBABACKUP_BUADMIN_LBL_DOWNLOAD_TITLE="Downloading through your browser may corrupt the files"
COM_AKEEBABACKUP_BUADMIN_LBL_DOWNLOAD_WARNING="We recommend closing this dialog and using FTP in <code>Binary</code> transfer mode or SFTP to download your backup archives."
COM_AKEEBABACKUP_BUADMIN_LBL_LOGFILEID="Log file ID"
COM_AKEEBABACKUP_BUADMIN_LOG_DOWNLOAD="Download"
COM_AKEEBABACKUP_BUADMIN_LOG_DOWNLOAD_CONFIRM="Downloading backup archives through your browser is prone\nto failure, file corruption and file truncation due tor reasons\nobjectively outside our control (server configuration, site\nconfiguration, third party plugins and browser configuration).\n\nWe VERY STRONGLY recommend that you only ever\ndownload backup archives through FTP in Binary transfer\nmode (do not use Auto or ASCII; it will corrupt your backup\narchives) by using client software such as FileZilla,\n CyberDuck, WinSCP or similar; or by using the\nfile manager feature of your host‘s hosting control panel.\n\nIf you continue with this download you are explicitly agreeing\nthat you are waiving your right to support for any backup\narchive download, extraction or restoration issue and you\nunderstand that any such requests will not be replied to.\n\nAre you sure you want to continue?"
COM_AKEEBABACKUP_BUADMIN_LOG_EDITCOMMENT="View / Edit backup comment"
COM_AKEEBABACKUP_BUADMIN_LOG_SAVEDOK="The changes to the backup entry have been saved successfully"
COM_AKEEBABACKUP_BUADMIN_LOG_SAVEERROR="The changes to the backup entry have not been saved"
COM_AKEEBABACKUP_BUADMIN_MSG_DELETED="Backup entry and archive were deleted successfully"
COM_AKEEBABACKUP_BUADMIN_MSG_DELETEDFILE="Backup archive was deleted successfully"
COM_AKEEBABACKUP_BUADMIN_UNFREEZE_OK="Record(s) correctly unfrozen"

COM_AKEEBABACKUP_COMMON_EMAIL_BODY_INFO="The new backup was taken with profile #%s. It consists of %s part(s). The full list of files of this backup set is the following:"
COM_AKEEBABACKUP_COMMON_EMAIL_BODY_OK="Akeeba Backup has completed backing up your site using the front-end backup feature. You may visit the site's administrator section to download the backup."
COM_AKEEBABACKUP_COMMON_EMAIL_DEAFULT_SUBJECT="You have a new backup part"
COM_AKEEBABACKUP_COMMON_EMAIL_SUBJECT_OK="Akeeba Backup has taken a new backup"
COM_AKEEBABACKUP_COMMON_ERR_NOT_ENABLED="Operation not permitted"

COM_AKEEBABACKUP_CONFIG="Configuration"
COM_AKEEBABACKUP_CONFIGURATION="Akeeba Backup <small>Component Configuration Options</small>"
COM_AKEEBABACKUP_CONFIG_ADVANCED="Advanced configuration"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBALF_DESC="Akeeba Backup will break the processing step after archiving a large file. When you enable this option, Akeeba Backup will work faster. However, this may result to timeout or Internal Server errors."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBALF_LABEL="Disable step break after large files"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBBD_DESC="Akeeba Backup will break the processing step whenever it starts working on a new domain. This improves the verbosity of the process, but it extends the backup time by 10-20 seconds. When you enable this option, Akeeba Backup will work faster. However, you might experience a jumpy behaviour in the steps reported on the backup page."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBBD_LABEL="Disable step break between domains"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBBLF_DESC="Akeeba Backup will break the processing step before archiving a large file. When you enable this option, Akeeba Backup will work faster. However, this may result to timeout or Internal Server errors."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBBLF_LABEL="Disable step break before large files"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBPA_DESC="Akeeba Backup will break the processing step if it thinks that it will run out of time before it archives a file. This calculation is not entirely accurate and may result in slower backups. When you enable this option, Akeeba Backup will work faster. However, this may result to timeout or Internal Server errors."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBPA_LABEL="Disable proactive step breaking"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBPP_DESC="Akeeba Backup will break the processing step between sub-steps of the backup finalisation and post-processing. This can add about 10 seconds to the overall backup time. When you enable this option, Akeeba Backup will work faster. However, this may result to timeout or Internal Server errors."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SBPP_LABEL="Disable step break in finalisation"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SETTIMELIMIT_DESC="If your server doesn't run PHP in Safe Mode and supports set_time_limit(), Akeeba Backup will attempt to set an infinite PHP maximum execution time to work around potential timeout issues"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SETTIMELIMIT_LABEL="Set an infinite PHP time limit"
COM_AKEEBABACKUP_CONFIG_ADVANCED_SETMEMLIMIT_DESC="Tells Akeeba Backup to try and increase PHP's memory limit to a ridiculously high value (16Gb). This allows you to compress larger files and upload larger backup archives using memory-heavy remote storage options such as WebDAV. Note: this only sets the limit for the maximum memory consumption. In most cases, Akeeba Backup's backup engine consumes <em>far less</em> memory than that, typically in the low 20Mb area. Compressing and uploading larger files also requires changing other options in the backup profile's Configuration page."
COM_AKEEBABACKUP_CONFIG_ADVANCED_SETMEMLIMIT_LABEL="Set a large memory limit"
COM_AKEEBABACKUP_CONFIG_ANGIE_KEY_DESCRIPTION="If you are using the ANGIE embedded installer script you can optionally password-protect it, preventing unauthorised access to the installer. When you run the installer you will be asked to enter this password. Please note that the password is case sensitive, i.e. ABC, abc and Abc are three different passwords."
COM_AKEEBABACKUP_CONFIG_ANGIE_KEY_TITLE="ANGIE Password"
COM_AKEEBABACKUP_CONFIG_ARBITRARYFEEMAIL_DESC="Send email to this address (leave blank to email all Super Users)"
COM_AKEEBABACKUP_CONFIG_ARBITRARYFEEMAIL_LABEL="Email address"
COM_AKEEBABACKUP_CONFIG_ARCHIVENAME_DESCRIPTION="Naming template for the backup archive, where applicable. You can use the following macros:<ul><li><strong>[HOST]</strong> The host name. WARNING! This tag doesn't work in CRON mode.</li><li><strong>[DATE]</strong> Current date</li><li><strong>[TIME_TZ]</strong> Current time and timezone</li></ul>More are available; please consult the documentation."
COM_AKEEBABACKUP_CONFIG_ARCHIVENAME_TITLE="Backup archive name"
COM_AKEEBABACKUP_CONFIG_ARCHIVERENGINE_DESCRIPTION="Defines Akeeba Backup's archive format. Some engines, such as the DirectFTP, do not actually produce archives, but take care of transferring your files to other servers."
COM_AKEEBABACKUP_CONFIG_ARCHIVERENGINE_TITLE="Archiver engine"
COM_AKEEBABACKUP_CONFIG_AUTORESUME_DESCRIPTION="When this option is unchecked Akeeba Backup will halt the backup when the server responds with an error. When this option is enabled, Akeeba Backup will try to resume the backup by repeating the last step. This only applies to back-end backups. It will also not let you successfully resume all backups which result in an error: only backup attempts temporarily blocked by server CPU usage restrictions or network outage issues can be resumed."
COM_AKEEBABACKUP_CONFIG_AUTORESUME_MAXRETRIES_DESCRIPTION="How many times should Akeeba Backup retry resuming the backup before finally giving up. 3 to 5 retries work best on most servers."
COM_AKEEBABACKUP_CONFIG_AUTORESUME_MAXRETRIES_TITLE="Maximum retries of a backup step after an AJAX error"
COM_AKEEBABACKUP_CONFIG_AUTORESUME_TIMEOUT_DESCRIPTION="How many seconds to wait before resuming the backup. It is advisable to set this to 30 seconds or more (120 seconds is recommended in most cases) to give your server the necessary time to unblock the backup process before Akeeba Backup retries to complete it."
COM_AKEEBABACKUP_CONFIG_AUTORESUME_TIMEOUT_TITLE="Wait period before retrying the backup step"
COM_AKEEBABACKUP_CONFIG_AUTORESUME_TITLE="Resume backup after an AJAX error has occurred"
COM_AKEEBABACKUP_CONFIG_AZURE_ACCOUNTNAME_DESCRIPTION="The name of your account. If your endpoint is foobar.blob.core.windows.net then your account name is <strong>foobar</strong> and you must type <em>foobar</em> in this box."
COM_AKEEBABACKUP_CONFIG_AZURE_ACCOUNTNAME_TITLE="Account name"
COM_AKEEBABACKUP_CONFIG_AZURE_CONTAINER_DESCRIPTION="The Windows Azure BLOB Storage container to hold the backup archives. The container must already exist."
COM_AKEEBABACKUP_CONFIG_AZURE_CONTAINER_TITLE="Container"
COM_AKEEBABACKUP_CONFIG_AZURE_DIRECTORY_DESCRIPTION="The directory within the Windows Azure BLOB Storage container to store the backup archives. To store everything on the container's root, please leave blank."
COM_AKEEBABACKUP_CONFIG_AZURE_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_AZURE_KEY_DESCRIPTION="You can find your Primary Access Key at your account page on windows.azure.com. Copy and paste it here. It always has two equal signs at the end."
COM_AKEEBABACKUP_CONFIG_AZURE_KEY_TITLE="Primary Access Key"
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_ACCOUNTID_DESCRIPTION="Enter your BackBlaze application key ID. You can find this information in <a href='https://secure.backblaze.com/b2_buckets.htm'>your BackBlaze account page</a> after clicking on 'Show Account ID and Application Key'. If you are using your master key please enter your Account ID instead."
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_ACCOUNTID_TITLE="Application Key ID"
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_APPLICATIONKEY_DESCRIPTION="Enter your BackBlaze application key. You can find this information in <a href='https://secure.backblaze.com/b2_buckets.htm'>your BackBlaze account page</a> after clicking on 'Show Account ID and Application Key'. <strong>WARNING</strong>! This is only shown to you ONCE by BackBlaze. To display it again you will have to regenerate the Application Key, causing ALL previously linked instances of Akeeba Backup to get unlinked until you enter there the <em>new</em> Application Key."
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_APPLICATIONKEY_TITLE="Application Key"
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_BUCKET_DESCRIPTION="Your Backblaze bucket name"
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_BUCKET_TITLE="Bucket"
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_DIRECTORY_DESCRIPTION="The directory within your bucket where the backup archives will be stored. Leave blank to store files inside the bucket's root."
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_DISABLEMULTIPART_DESCRIPTION="When you enable this option Akeeba Backup will perform single part uploads to Backblaze. You will need to use a smaller Part Size for Split Archives setting in the Archiver Engine configuration to prevent the upload from timing out, causing the backup process to fail."
COM_AKEEBABACKUP_CONFIG_BACKBLAZE_DISABLEMULTIPART_TITLE="Disable multipart uploads"
COM_AKEEBABACKUP_CONFIG_BACKEND_HEADER_DESC="Options instructing Akeeba Backup how to handle back-end scripting"
COM_AKEEBABACKUP_CONFIG_BACKEND_HEADER_LABEL="Back-end"
COM_AKEEBABACKUP_CONFIG_BACKEND_LOCALTIME_DESC="Should we translate the backup start time to the currently logged in user's timezone in the Manage Backups page? If set to No all backup start times appear in the GMT timezone. This option DOES NOT affect the [DATE] and [TIME] variables for backup file naming or the default description; Use the Backup timezone option to change how these variables work."
COM_AKEEBABACKUP_CONFIG_BACKEND_LOCALTIME_LABEL="Local time in Manage Backups"
COM_AKEEBABACKUP_CONFIG_BACKEND_SHOWDELETEONRESTORE_DESC="Should I give users restoring a site the option to delete everything before extracing an archive? This option only applies to the Professional version of our software. WARNING! THIS IS EXTREMELY DANGEROUS. READ THE DOCUMENTATION VERY CAREFULLY BEFORE ENABLING IT. IF YOU USE THIS FEATURE DURING RESTORATION YOU ARE WAIVING ANY RIGHT TO REQUEST SUPPORT AND ASSUME ALL RESPONSIBILITY AND LIABILITY."
COM_AKEEBABACKUP_CONFIG_BACKEND_SHOWDELETEONRESTORE_LABEL="Show the “Delete everything before extraction” option"
COM_AKEEBABACKUP_CONFIG_BACKEND_TIMEZONETEXT_ABBREVIATION="Time Zone"
COM_AKEEBABACKUP_CONFIG_BACKEND_TIMEZONETEXT_DESC="The timezone suffix to display next to the backup start time in the Manage Backups page.<br/>None: no suffix is displayed (not recommended).<br/>Time Zone: an abbreviated time zone, e.g. CEST for Central Europe Standard Time.<br/>GMT Offset: the offset from the GMT timezone, e.g. GMT+01:00 (= two hours ahead of GMT i.e. Central Europe Standard Time). Please note that during daylights savings GMT offset is +1 hour to the regular timezone. This offset difference WILL be shown in this format."
COM_AKEEBABACKUP_CONFIG_BACKEND_TIMEZONETEXT_GMTOFFSET="GMT Offset"
COM_AKEEBABACKUP_CONFIG_BACKEND_TIMEZONETEXT_LABEL="Timezone suffix"
COM_AKEEBABACKUP_CONFIG_BACKEND_TIMEZONETEXT_NONE="None"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_ALLDB="All configured databases (archive file)"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_DBONLY="Main site database only (SQL file)"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_DESCRIPTION="Which kind of site backup you want Akeeba Backup to perform"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_FILEONLY="Site files only"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_FULL="Full site backup"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_INCFILE="Files only, incremental"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_INCFULL="Full site, incremental files"
COM_AKEEBABACKUP_CONFIG_BACKUPTYPE_TITLE="Backup Type"
COM_AKEEBABACKUP_CONFIG_BACTHSIZE_DESCRIPTION="Lowering this value will conserve memory and avoid HTTP 500 errors while backing up huge tables"
COM_AKEEBABACKUP_CONFIG_BACTHSIZE_TITLE="Number of rows per batch"
COM_AKEEBABACKUP_CONFIG_BIGFILETHRESHOLD_DESCRIPTION="Files over this size will be stored uncompressed, or their processing will span multiple steps (depending on the archiver engine) in order to avoid timeouts. We suggest increasing this value only on fast and reliable servers."
COM_AKEEBABACKUP_CONFIG_BIGFILETHRESHOLD_TITLE="Big file threshold"
COM_AKEEBABACKUP_CONFIG_BLANKOUTPASS_DESCRIPTION="Removes the username and password of database connections from the backup"
COM_AKEEBABACKUP_CONFIG_BLANKOUTPASS_TITLE="Blank out username/password"
COM_AKEEBABACKUP_CONFIG_BOX_ACCESSTOKEN_TITLE="Access Token"
COM_AKEEBABACKUP_CONFIG_BOX_CHUNKUPLOAD_ENABLE="Enable chunk upload"
COM_AKEEBABACKUP_CONFIG_BOX_CHUNKUPLOAD_SIZE="Chunk size"
COM_AKEEBABACKUP_CONFIG_BOX_DIRECTORY_DESCRIPTION="The directory within your Box account where the backup archives will be stored. Leave blank to store files inside the Box folder root."
COM_AKEEBABACKUP_CONFIG_BOX_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_BOX_OPENOAUTH_DESC="Click on this button to open a new window where you can log in to your account with the storage provider. Then, please close the popup window and click on the Step 2 button below."
COM_AKEEBABACKUP_CONFIG_BOX_OPENOAUTH_TITLE="Authentication - Start here"
COM_AKEEBABACKUP_CONFIG_BOX_REFRESHTOKEN_DESCRIPTION="Filled in automatically when you complete the authentication Step 1 above. Do NOT share the same token on many sites. Instead, authenticate each site separately."
COM_AKEEBABACKUP_CONFIG_BOX_REFRESHTOKEN_TITLE="Refresh Token"
COM_AKEEBABACKUP_CONFIG_CHUNKSIZE_DESCRIPTION="Akeeba Backup processes large file in small chunks, in order to avoid timeouts. This parameter defines the maximum chunk size for this kind of processing."
COM_AKEEBABACKUP_CONFIG_CHUNKSIZE_TITLE="Chunk size for large files processing"
COM_AKEEBABACKUP_CONFIG_CLIENTSIDEWAIT_DESCRIPTION="When this box is unchecked (default) and the backup step finishes in less time than the configured minimum execution time Akeeba Backup will have the server wait until that time is reached. This may cause some very restrictive servers to kill your backup. Checking this box will implement the waiting period on the browser, working around this limitation. IMPORTANT: This option only applies to back-end backups. Front-end, JSON API (remote) and Command-Line (CLI) backups always implement the wait at the server side."
COM_AKEEBABACKUP_CONFIG_CLIENTSIDEWAIT_TITLE="Client-side implementation of minimum execution time"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESAPIKEY_DESCRIPTION="Your CloudFiles API key"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESAPIKEY_TITLE="API Key"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESCONTAINER_DESCRIPTION="The CloudFiles container to hold the backup archives"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESCONTAINER_TITLE="Container"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESDIRECTORY_DESCRIPTION="The directory within the CloudFiles container to store the backup archives. To store everything on the container's root, please leave blank."
COM_AKEEBABACKUP_CONFIG_CLOUDFILESDIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESUSERNAME_DESCRIPTION="Your CloudFiles user name"
COM_AKEEBABACKUP_CONFIG_CLOUDFILESUSERNAME_TITLE="Username"
COM_AKEEBABACKUP_CONFIG_CLOUDME_DIRECTORY_DESCRIPTION="The directory within your CloudMe account where the backup archives will be stored. Leave blank to store files inside the CloudMe folder root."
COM_AKEEBABACKUP_CONFIG_CLOUDME_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_CLOUDME_PASSWORD_DESCRIPTION="Password"
COM_AKEEBABACKUP_CONFIG_CLOUDME_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_CLOUDME_USERNAME_DESCRIPTION="Username"
COM_AKEEBABACKUP_CONFIG_CLOUDME_USERNAME_TITLE="Username"
COM_AKEEBABACKUP_CONFIG_COUNTQUOTA_ENABLE_DESCRIPTION="When enabled, Akeeba Backup will erase old backup files if they are more than the limit defined below."
COM_AKEEBABACKUP_CONFIG_COUNTQUOTA_ENABLE_TITLE="Enable count quota"
COM_AKEEBABACKUP_CONFIG_COUNTQUOTA_VALUE_DESCRIPTION="Akeeba Backup will erase old backup files if they are more than the limit defined in this setting. Multi-part backups are considered as <em>one</em> file!<br/><br/><strong>Tip</strong>: Select Custom and type in your desired value if it's not on the list."
COM_AKEEBABACKUP_CONFIG_COUNTQUOTA_VALUE_TITLE="Count quota"
COM_AKEEBABACKUP_CONFIG_DATEFORMAT_DESC="Change how the Start date/time of backups is displayed in the Manage Backups page. Leave blank to use the default formatting. You can use the formatting options of PHP's date function, see: http://www.php.net/manual/en/function.date.php"
COM_AKEEBABACKUP_CONFIG_DATEFORMAT_LABEL="Date format"
COM_AKEEBABACKUP_CONFIG_DELETEAFTER_DESCRIPTION="If enabled, the backup archive will be removed from this server as soon as post-processing finishes successfully."
COM_AKEEBABACKUP_CONFIG_DELETEAFTER_TITLE="Delete archive after processing"
COM_AKEEBABACKUP_CONFIG_DEREFERENCESYMLINKS_DESCRIPTION="When enabled, symbolic links will be followed just like normal files and directories. When not checked, symbolic links will not be followed. If you are using symbolic links which lead to an infinite link loop, uncheck this option."
COM_AKEEBABACKUP_CONFIG_DEREFERENCESYMLINKS_TITLE="Dereference symlinks"
COM_AKEEBABACKUP_CONFIG_DESKTOP_NOTIFICATIONS_DESC="Should you be asked to allow desktop notifications to be displayed? Desktop notifications appear when the backups starts, finishes, throws a warning or halts. They are only displayed on compatible browsers (typically: Chrome, Safari, Firefox, Opera) if you give Akeeba Backup the permission to display desktop notifications when prompted in the Control Panel page. This option only controls whether this prompt should be displayed. Once you accept or decline the desktop notification messages permissions this setting has <strong>no effect</strong>. The only way to enable or disable desktop notifications will be through your browser's settings."
COM_AKEEBABACKUP_CONFIG_DESKTOP_NOTIFICATIONS_LABEL="Ask for Desktop Notifications permissions"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_FTPS_DESCRIPTION="If enabled, Akeeba Backup will try to connect to your FTP server using an SSL-encrypted connection. <strong>This is not the same as SFTP, SCP or \"Secure FTP\"!</strong> Do note that if your server doesn't support this method you will get connection errors."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_FTPS_TITLE="Use FTP over SSL (FTPS)"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_HOST_DESCRIPTION="FTP server's host name, without the protocol. This means that <code>ftp://example.com</code> is <strong>invalid</strong> and <code>example.com</code> is valid. Akeeba Backup only supports FTP and FTPS servers. It <u>does not</u> support SFTP, SCP and other SSH variants."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_HOST_TITLE="Host name"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_INITDIR_DESCRIPTION="The absolute <strong>FTP</strong> path to the directory where the files will be uploaded. If unsure, connect to your server with FileZilla, browse to the intended directory and copy the path appearing on the right-hand pane above the directory list. It is usually something short, like <code>/public_html</code>."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_INITDIR_TITLE="Initial directory"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PASSIVE_DESCRIPTION="Use FTP passive mode when transferring data. This is enabled by default as it is the only method which works through firewalls commonly installed on web servers. Do not disable unless you are certain that your web server is not behind a firewall and that your FTP server absolutely requires Active mode file transfers."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PASSIVE_TITLE="Use passive mode"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PASSWORD_DESCRIPTION="FTP server's password. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PORT_DESCRIPTION="FTP server's port. The most common setting is 21. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_PORT_TITLE="Port"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_TEST_DESCRIPTION="Use this button to test the FTP connection and view the connection errors on failure."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_TEST_FAIL="Could not connect to the remote FTP server."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_TEST_OK="Connection to remote FTP server was established successfully!"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_TEST_TITLE="Test FTP connection"
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_USER_DESCRIPTION="FTP server's user name. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_DIRECTFTP_USER_TITLE="User name"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_HOST_DESCRIPTION="Please enter the host name or IP address of your SFTP server"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_HOST_TITLE="Host name"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_INITDIR_DESCRIPTION="Please enter the directory where the files will be uploaded to. If unsure, use an SFTP desktop client, connect to your server, navigate to the desired directory and copy the path displayed in here. The path must be in absolute format, e.g. /users/myusername/public_html"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_INITDIR_TITLE="Initial directory"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_PASSWORD_DESCRIPTION="The SFTP password"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_PORT_DESCRIPTION="The usual port for SFTP connections is 22. If your server is using a different port, please enter it here."
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_PORT_TITLE="Port"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_TEST_DESCRIPTION="Use this button to test the SFTP connection and view the connection errors on failure."
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_TEST_FAIL="Could not connect to the remote SFTP server. The error message was:"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_TEST_OK="Successfully connected to the remote SFTP server. Note: the initial directory setting was not tested."
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_TEST_TITLE="Test SFTP connection"
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_USER_DESCRIPTION="The SFTP username. Please note that your SFTP server must allow username/password authentication."
COM_AKEEBABACKUP_CONFIG_DIRECTSFTP_USER_TITLE="Username"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSACCESSKEY_DESCRIPTION="Your DreamObjects Access Key, made available to you under the DreamHost control panel"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSACCESSKEY_TITLE="Access Key"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSBUCKET_DESCRIPTION="Your DreamObjects bucket name. Make sure it's typed as shown in the DreamHost control panel"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSBUCKET_TITLE="Bucket"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSDIRECTORY_DESCRIPTION="The directory within your bucket where the backup archives will be stored. Leave blank to store files inside the bucket's root."
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSDIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSLOWERCASE_DESCRIPTION="If enabled, Akeeba Backup will try to change the bucket name to all lowercase letters, i.e. MyBucket will be converted to mybucket. If you have created a bucket with uppercase letters, e.g. MyNewBucket, uncheck this option and make sure the bucket name is spelled exactly as it appears in your DreamHost control panel."
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSLOWERCASE_TITLE="Lowercase bucket name"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSSECRETKEY_DESCRIPTION="Your DreamObjects Secret Key, made available to you under the DreamHost control panel"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSSECRETKEY_TITLE="Secret Key"
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSUSESSL_DESCRIPTION="If enabled, a secure (HTTPS) connection will be used when uploading your files. While it increases security of transferred data, it also increases the possibility of backup failure due to timeout."
COM_AKEEBABACKUP_CONFIG_DREAMOBJECTSUSESSL_TITLE="Use SSL"
COM_AKEEBABACKUP_CONFIG_DROPBOXDIRECTORY_DESCRIPTION="The directory within your Dropbox account where the backup archives will be stored. Leave blank to store files inside the root."
COM_AKEEBABACKUP_CONFIG_DROPBOXDIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_DROPBOXREFRESHTOKEN_DESCRIPTION="This is the Refresh Token which connects Akeeba Backup to Dropbox. This is <strong>site-specific</strong> and used to re-authorise the Dropbox connection when the short-lived Access Token expires. If you have multiple sites, you must use the Step 1 buttons on each and every site you want authorise. Please <strong>DO NOT</strong> copy the access or refresh token across multiple sites. It will cause the Dropbox authentication to become out of sync and you'll need to reconnect all of your sites with Dropbox."
COM_AKEEBABACKUP_CONFIG_DROPBOXREFRESHTOKEN_TITLE="Refresh Token"
COM_AKEEBABACKUP_CONFIG_DROPBOXTOKEN_DESCRIPTION="This is automatically fetched from Dropbox when you click the Step 2 button above. If you have multiple sites, you must use the Step 1 and Step 2 buttons only on the FIRST site you want authorise. Then please copy the Token, Token Secret Key and User ID from the first site to all other sites you want to connect to Dropbox."
COM_AKEEBABACKUP_CONFIG_DROPBOXTOKEN_TITLE="Access Token"
COM_AKEEBABACKUP_CONFIG_DROPBOX_TEAM_DESC="Check if you are a member of a team using Dropbox for Business and want to use your team's folder to store backups. Remember to prefix the Directory below with the name of your team folder. For example, if Dropbox' web interface shows an “Acme Corp Team Folder” in the Files page and you want to put your backups in a folder called “Backups” inside it you should use the Directory name <code>Acme Corp Team Folder/Backups</code>, not just <code>Backups</code>."
COM_AKEEBABACKUP_CONFIG_DROPBOX_TEAM_TITLE="Dropbox for Business"
COM_AKEEBABACKUP_CONFIG_DUMPENGINE_DESCRIPTION="Defines how Akeeba Backup will process your database(s) in order to produce a database backup file."
COM_AKEEBABACKUP_CONFIG_DUMPENGINE_TITLE="Database backup engine"
COM_AKEEBABACKUP_CONFIG_DUMP_DIVIDER_COMMON="Common Settings"
COM_AKEEBABACKUP_CONFIG_DUMP_DIVIDER_MYSQL="MySQL Settings"
COM_AKEEBABACKUP_CONFIG_DUMP_DIVIDER_REVERSE="Reverse engineering database dump settings"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTPCURL_DESCRIPTION="Transfers the site files to a remote FTP server, without archiving them first. This archiver engine uses the cURL library which provides better compatiblity with a wide range of FTP servers."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTPCURL_PASVWORKAROUND_DESCRIPTION="Some badly configured or misbehaving FTP servers return the wrong IP address when FTP Passive mode is enabled. Enable this option to force the FTP library to ignore the wrong IP returned by the FTP server, instead using the FTP server's public IP."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTPCURL_PASVWORKAROUND_TITLE="Passive mode workaround"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTPCURL_TITLE="DirectFTP over cURL"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTP_DESCRIPTION="Transfers the site files to a remote FTP server, without archiving them first"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTFTP_TITLE="DirectFTP"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTSFTPCURL_DESCRIPTION="Transfers the site files to a remote SFTP server, without archiving them first. This archiver engine uses the cURL library which provides better compatiblity with a wide range of FTP servers."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTSFTPCURL_TITLE="DirectSFTP over cURL"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTSFTP_DESCRIPTION="Transfers the site files to a remote SFTP server, without archiving them first. WARNING: Your source server needs to have PHP's SSL2 extension installed."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_DIRECTSFTP_TITLE="DirectSFTP"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_JPA_DESCRIPTION="An open-source archive format optimised for fast archive creation and extraction using PHP code"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_JPA_TITLE="JPA format (recommended)"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_JPS_DESCRIPTION="Creates archives encrypted with the industry-standard AES-128 encryption method, in a format very similar to JPA. Requires either of the mcrypt or openssl PHP extensions to be installed and activated on your site."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_JPS_TITLE="Encrypted Archives (JPS)"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_ZIPNATIVE_DESCRIPTION="The ZIP archive will be created using PHP's ZipArchive class. IMPORTANT: This engine does not support archive splitting or symlink handling and can, therefore, lead to backup issues. If you get timeout errors, AJAX errors or Internal Server Error messages you will have to switch to a different archiver engine and enable archive splitting."
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_ZIPNATIVE_TITLE="ZIP using ZipArchive class"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_ZIP_DESCRIPTION="Standard ZIP files, a.k.a. \"Compressed folders\", natively supported by all leading operating systems"
COM_AKEEBABACKUP_CONFIG_ENGINE_ARCHIVER_ZIP_TITLE="ZIP format"
COM_AKEEBABACKUP_CONFIG_ENGINE_DUMP_NATIVE_DESCRIPTION="Uses PHP code to produce an accurate database dump"
COM_AKEEBABACKUP_CONFIG_ENGINE_DUMP_NATIVE_TITLE="Native MySQL backup engine"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_AZURE_DESCRIPTION="Uploads the backup archive to Microsoft Windows Azure BLOB Storage."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_AZURE_TITLE="Upload to Microsoft Windows Azure BLOB Storage"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_BACKBLAZE_DESCRIPTION="Uploads the backup archive to BackBlaze."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_BACKBLAZE_TITLE="Upload to BackBlaze B2"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_BOX_DESCRIPTION="Uploads the backup archive to Box.com. Please read the documentation."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_BOX_TITLE="Upload to Box.com"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_CLOUDFILES_DESCRIPTION="Uploads the backup archive to RackSpace CloudFiles.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_CLOUDFILES_TITLE="Upload to RackSpace CloudFiles"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_CLOUDME_DESCRIPTION="Uploads the backup archive to CloudMe.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_CLOUDME_TITLE="Upload to CloudMe"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_DREAMOBJECTS_DESCRIPTION="Uploads the backup archive to DreamObjects.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_DREAMOBJECTS_TITLE="Upload to DreamObjects"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_DROPBOX2_DESCRIPTION="Uploads the backup archive to Dropbox using the Dropbox V2 API. This API is faster and lets you easily connect your Dropbox account to multiple sites."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_DROPBOX2_TITLE="Upload to Dropbox (v2 API)"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_EMAIL_DESCRIPTION="Sends you the backup archive as an email attachment.<br/><strong>Remember to set a split archive size of 1-2Mb or you risk backup failure due to timeouts and memory outage!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_EMAIL_TITLE="Send by Email"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_FTPCURL_DESCRIPTION="Uploads the backup archive to a remote FTP or FTPS (FTP over Implicit SSL) server.<br/>This post-processing engine uses the cURL library which provides better compatiblity with a wide range of FTP servers.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_FTPCURL_TITLE="Upload to Remote FTP server using cURL"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_FTP_DESCRIPTION="Uploads the backup archive to a remote FTP or FTPS (FTP over Implicit SSL) server.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_FTP_TITLE="Upload to Remote FTP server"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLEDRIVE_DESCRIPTION="Uploads the backup archive to Google Drive. Please read the documentation."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLEDRIVE_TITLE="Upload to Google Drive"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLESTORAGEJSON_DESCRIPTION="Uploads the backup archive to Google Storage using the modern JSON API. This is the recommended integration with Google Storage.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLESTORAGEJSON_TITLE="Upload to Google Storage (JSON API)"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLESTORAGE_DESCRIPTION="Uploads the backup archive to Google Storage using the legacy S3 API emulation. This is deprecated and will be removed in the future. Please use the JSON API option instead.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_GOOGLESTORAGE_TITLE="Upload to Google Storage (Legacy S3 API)"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_IDRIVESYNC_DESCRIPTION="Uploads the backup archive to iDriveSync EVS (iDriveSync.com).<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_IDRIVESYNC_TITLE="Upload to iDriveSync"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_NONE_DESCRIPTION="Leaves the backup archive files on the server"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_NONE_TITLE="No post-processing"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_ONEDRIVEBUSINESS_DESCRIPTION="Uploads the backup archive to Microsoft OneDrive or Microsoft OneDrive for Business."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_ONEDRIVEBUSINESS_TITLE="Upload to Microsoft OneDrive or OneDrive for Business"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_ONEDRIVE_DESCRIPTION="Uploads the backup archive to Microsoft OneDrive. This only supports personal drives, created using your personal Microsoft Account. It does not support OneDrive for Business and OneDrive accounts created through a school / work account or a Microsoft Office 365 subscription. This upload method will be REMOVED in a future version of Akeeba Backup. Use the Upload To Microsoft OneDrive method instead."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_ONEDRIVE_TITLE="Upload to Microsoft OneDrive (LEGACY)"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_OVH_DESCRIPTION="Uploads the backup archive to OVH Object Storage. <br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_OVH_TITLE="Upload to OVH Object Storage"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_PCLOUD_DESCRIPTION="Uploads the backup archive to pCloud. THIS POST-PROCESSING ENGINE WILL BE REMOVED. AUTHENTICATION IS NOT WORKING BECAUSE OF ISSUES ON pCloud's API SERVER."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_PCLOUD_TITLE="Upload to pCloud (DO NOT USE - WILL BE REMOVED)"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_S3_DESCRIPTION="Uploads the backup archive to Amazon S3. It allows you to use both the new (AWS4) authentication required for newer S3 location and the old (AWS2) authentication required for third party storage providers offerring an S3-compatible API.<br/><strong>If you disable multipart uploads remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong><br/>If you want to use Amazon STS instead of an Access and Secret Key please read the documentation."
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_S3_TITLE="Upload to Amazon S3"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SFTPCURL_DESCRIPTION="Uploads the backup archive to a remote SFTP (SSH) server. This is a file transfer over SSH using a protocol called SFTP which is <em>entirely different</em> to FTP and FTPS.<br/>This post-processing engine uses cURL for the data transfer, a library which is compatible with a wide range of SFTP servers.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SFTPCURL_TITLE="Upload to Remote SFTP (SSH) server using cURL"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SFTP_DESCRIPTION="Uploads the backup archive to a remote SFTP (SSH) server. This is a file transfer over SSH using a protocol called SFTP which is <em>entirely different</em> to FTP and FTPS.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SFTP_TITLE="Upload to Remote SFTP (SSH) server"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SUGARSYNC_DESCRIPTION="Uploads the backup archive to SugarSync.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SUGARSYNC_TITLE="Upload to SugarSync"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SWIFT_DESCRIPTION="Uploads the backup archive to any OpenStack Swift object storage server, e.g. one created with the Ubuntu distribution of OpenStack or other private clouds. Do NOT use this method with RackSpace CloudFiles! CloudFiles uses a custom authentication method which is incompatible with OpenStack's Keystone identity service (what literally every other OpenStack implementation uses).<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_SWIFT_TITLE="Upload to OpenStack Swift object storage"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_WEBDAV_DESCRIPTION="Uploads the backup archive to any storage service that supports WebDAV protocol.<br/><strong>Remember to set a split archive size of 2-30Mb or you risk backup failure due to timeouts!</strong>"
COM_AKEEBABACKUP_CONFIG_ENGINE_POSTPROC_WEBDAV_TITLE="Upload using WebDAV"
COM_AKEEBABACKUP_CONFIG_ENGINE_SCAN_LARGE_DESCRIPTION="A file scanner optimised for backing up sites with directories containing hundreds of files (e.g. blogs and news portals)"
COM_AKEEBABACKUP_CONFIG_ENGINE_SCAN_LARGE_TITLE="Large Site Scanner"
COM_AKEEBABACKUP_CONFIG_ENGINE_SCAN_SMART_DESCRIPTION="Intelligently balances scanning speed and time-out avoidance"
COM_AKEEBABACKUP_CONFIG_ENGINE_SCAN_SMART_TITLE="Smart scanner"
COM_AKEEBABACKUP_CONFIG_ERR_DECRYPTION="Could not decrypt settings. Your server does not support settings encryption or the encryption key file has been modified or deleted."
COM_AKEEBABACKUP_CONFIG_EXTENDEDINSERTS_DESCRIPTION="If checked, the database dump will be made of extended INSERT statements, i.e. a single statement to restore multiple rows of data. It is highly recommended that you keep this option enabled as it will speed up the restoration process and works around query quota limits on restrictive hosts."
COM_AKEEBABACKUP_CONFIG_EXTENDEDINSERTS_TITLE="Generate extended INSERTs"
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILADDRESS_DESC="Send email to this address (leave blank to email all Super Users)"
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILADDRESS_LABEL="Email address"
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILBODY_DESC="Leave blank to use the default. You can use all of Akeeba Backup's variables you can use for naming archive files, e.g. [HOST] and [DATE]."
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILBODY_LABEL="Email Body"
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILSUBJECT_DESC="Leave blank to use the default. You can use all of Akeeba Backup's variables you can use for naming archive files, e.g. [HOST] and [DATE]"
COM_AKEEBABACKUP_CONFIG_FAILURE_EMAILSUBJECT_LABEL="Email Subject"
COM_AKEEBABACKUP_CONFIG_FAILURE_FEBENABLE_DESC="Allows checking for failed backups using a front-end scheduling URL. Please remember to go to Akeeba Backup, click on Options, then the Frontend tab. Set “Enable Legacy Front-end Backup API (remote CRON jobs)” to Yes to enable this feature."
COM_AKEEBABACKUP_CONFIG_FAILURE_FEBENABLE_LABEL="Enabled failed backups check from the front-end"
COM_AKEEBABACKUP_CONFIG_FAILURE_SEPARATOR="<strong>Check for failed backups</strong>"
COM_AKEEBABACKUP_CONFIG_FAILURE_TIMEOUT_DESC="A backup will be considered stuck (failed) after this many seconds of inactivity.<br/>DON'T TOUCH THIS VALUE UNLESS YOU KNOW WHAT YOU'RE DOING!"
COM_AKEEBABACKUP_CONFIG_FAILURE_TIMEOUT_LABEL="Stuck backup timeout"
COM_AKEEBABACKUP_CONFIG_FEEMAILBODY_DESC="Leave blank to use default. You can use all of Akeeba Backup's variables you can use for naming archive files, e.g. [HOST] and [DATE]. You can also use [PROFILENUMBER] for the current profile's number, [PROFILENAME] for the current profile's name, [PARTCOUNT] for the number of total generated backup archive's parts, [FILELIST] for a list of backup archive parts and [REMOTESTATUS] for an indication on whether the upload to remote storage completed successfully."
COM_AKEEBABACKUP_CONFIG_FEEMAILBODY_LABEL="Email Body"
COM_AKEEBABACKUP_CONFIG_FEEMAILSUBJECT_DESC="Leave blank to use default. You can use all of Akeeba Backup's variables you can use for naming archive files, e.g. [HOST] and [DATE]"
COM_AKEEBABACKUP_CONFIG_FEEMAILSUBJECT_LABEL="Email Subject"
COM_AKEEBABACKUP_CONFIG_FORCEDBACKUPTZ_DEFAULT="Default Joomla! behavior"
COM_AKEEBABACKUP_CONFIG_FORCEDBACKUPTZ_DESC="The backup date and time -as recorded in the filename, default description and emails- will be expressed in this timezone. This options affects all backup origins i.e. all backups, no matter how they are taken (through Akeeba Backup itself, the remote JSON API etc)."
COM_AKEEBABACKUP_CONFIG_FORCEDBACKUPTZ_LABEL="Backup timezone"
COM_AKEEBABACKUP_CONFIG_FRONTENDEMAIL_DESC="Send a notification e-mail after taking a backup with the Front-end Baclup (Legacy API) or JSON API feature."
COM_AKEEBABACKUP_CONFIG_FRONTENDEMAIL_LABEL="Email on backup completion"
COM_AKEEBABACKUP_CONFIG_FRONTEND_EMAIL_WHEN_ALWAYS="Always"
COM_AKEEBABACKUP_CONFIG_FRONTEND_EMAIL_WHEN_DESC="When should I send the email on backup completion? Always means every time a backup completed. Upload Failed means that the email is only sent if the backup is complete but the upload to remote storage did not complete successfully. If the backup fails no email can be sent by this feature; check the Schedule Automatic Backups page for information on receiving email about failed backups."
COM_AKEEBABACKUP_CONFIG_FRONTEND_EMAIL_WHEN_FAILEDUPLOAD="Upload Failed"
COM_AKEEBABACKUP_CONFIG_FRONTEND_EMAIL_WHEN_LABEL="When to send the email"
COM_AKEEBABACKUP_CONFIG_FRONTEND_HEADER_DESC="<strong>These options only apply to Akeeba Backup Professional</strong>. Control the remote and scheduled features options for Akeeba Backup. For more information on scheduling backups please check the Scheduling Information page in Akeeba Backup Professional or our documentation."
COM_AKEEBABACKUP_CONFIG_FRONTEND_HEADER_LABEL="Front-end backup"
COM_AKEEBABACKUP_CONFIG_FTPTEST_BADPREFIX="You are NOT supposed to add the ftp:// prefix to your FTP Hostname. Please remove the ftp:// prefix and retry."
COM_AKEEBABACKUP_CONFIG_FTPTEST_NOUPLOAD="Akeeba Backup was able to connect to your server, but it could not upload a test file. Backup upload could fail."
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_ACCESSTOKEN_DESCRIPTION="Filled in automatically when you complete the authentication Step 1 above. If you are linking another site to the same Google Drive account DO NOT copy the access token and DO NOT run the authentication. Instead, simply copy the Refresh Token from the previous site to this one."
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_ACCESSTOKEN_TITLE="Access Token"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_DIRECTORY_DESCRIPTION="The directory within the Google Drive to store the backup archives. Please use forward slashes. Correct: some/thing. Wrong: some\\thing. A single forward slash means that archives will be stored in the drive's root. READ THE DOCUMENTATION: Paths in Google Drive are ambiguous!"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_REFRESHTOKEN_TITLE="Refresh Token"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_REFRESHTEAMDRIVES_TITLE="Reload the list of Drives"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_TEAMDRIVE_DESCRIPTION="Which Google Drive you want your files stored into. You need to finish authentication before this list is populated. Only makes sense when you have access to Google Team Drives (e.g. G Suite business or enterprise plan users). If unsure use the “Google Drive (personal)” option."
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_TEAMDRIVE_OPT_PERSONAL="Google Drive (personal)"
COM_AKEEBABACKUP_CONFIG_GOOGLEDRIVE_TEAMDRIVE_TITLE="Drive"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEACCESSKEY_DESCRIPTION="Your Google Storage Access Key, made available to you under the Google Cloud Storage key management tool (https://code.google.com/apis/console#:storage:legacy)"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEACCESSKEY_TITLE="Access Key"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEBUCKET_DESCRIPTION="Your Google Storage bucket name. Make sure it's typed as shown in the Google Cloud Storage browser web application (https://sandbox.google.com/storage)"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEBUCKET_TITLE="Bucket"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEDIRECTORY_DESCRIPTION="The directory within your bucket where the backup archives will be stored. Leave blank to store files inside the bucket's root."
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEDIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEJSON_CREDS_DESC="Paste here the contents of the JSON credentials file Google Cloud Console produced when setting up the Service Account for the backup software. Remember to include the curly braces in the beginning and end of the text."
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEJSON_CREDS_TITLE="Contents of googlestorage.json (read the documentation)"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGELOWERCASE_DESCRIPTION="If enabled, Akeeba Backup will try to change the bucket name to all lowercase letters, i.e. MyBucket will be converted to mybucket. If you have created a bucket with uppercase letters, e.g. MyNewBucket, uncheck this option and make sure the bucket name is spelled exactly as it appears in your Google Cloud Storage browser web application (https://sandbox.google.com/storage)."
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGELOWERCASE_TITLE="Lowercase bucket name"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGESECRETKEY_DESCRIPTION="Your Google Storage Secret Key, made available to you under the Google Cloud Storage key management tool (https://code.google.com/apis/console#:storage:legacy)"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGESECRETKEY_TITLE="Secret Key"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEUSESSL_DESCRIPTION="If enabled, a secure (HTTPS) connection will be used when uploading your files. While it increases security of transferred data, it also increases the possibility of backup failure due to timeout."
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGEUSESSL_TITLE="Use SSL"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_COLDLINE="Coldline Storage"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_DESCRIPTION="Change the storage class of the uploaded backup archives. “None” means that the files will be stored with the default storage class specified in your bucket. Please note that options other than Standard may be cheaper to store but they may incur additional fees if you download them or delete them. Please consult Google for pricing information."
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_NEARLINE="Nearline Storage"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_NONE="None (let the bucket decide)"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_STANDARD="Standard Storage"
COM_AKEEBABACKUP_CONFIG_GOOGLESTORAGE_STORAGECLASS_TITLE="Storage Class"
COM_AKEEBABACKUP_CONFIG_HEADER_BASIC="Basic Configuration"
COM_AKEEBABACKUP_CONFIG_HEADER_CONFWIZ="Let Akeeba Backup configure itself?"
COM_AKEEBABACKUP_CONFIG_HEADER_OPTIONALFILTERS="Optional filters"
COM_AKEEBABACKUP_CONFIG_HEADER_QUOTA="Quota management"
COM_AKEEBABACKUP_CONFIG_HEADER_TUNING="Fine tuning"
COM_AKEEBABACKUP_CONFIG_INSTALLER_DESCRIPTION="When performing a full site backup, Akeeba Backup embeds the restoration script defined here to the archive. This allows a restoration of your site from scratch, without having to install your CMS or Akeeba Backup, even when your site or server is completely destroyed"
COM_AKEEBABACKUP_CONFIG_INSTALLER_TITLE="Embedded restoration script"
COM_AKEEBABACKUP_CONFIG_JPS_KEY_DESCRIPTION="This key will be used to encrypt your archive's contents. The key is case sensitive, i.e. ABC, abc and Abc are three different passwords. Keep a copy of the password in a safe place! If you lose it there is no way to recover it."
COM_AKEEBABACKUP_CONFIG_JPS_KEY_TITLE="Encryption key"
COM_AKEEBABACKUP_CONFIG_JPS_PBKDF2USESTATICSALT_DESCRIPTION="When enabled (default), your password will be expanded to a cryptographic key used throughout the archive. This is fast but in the very unlikely event that an attacker with ample resources manages to reverse engineer the cryptographic key from one encrypted block in the file -without brute forcing your password itself- they can then decrypt the entire backup archive. When disabled a different cryptographic key will be derived from your password on each encrypted block which is MUCH slower but protects you against this type of attack, requiring the attacker to brute force the password which is much slower."
COM_AKEEBABACKUP_CONFIG_JPS_PBKDF2USESTATICSALT_TITLE="Archive-wide key expansion"
COM_AKEEBABACKUP_CONFIG_JSONAPI_ENABLED_DESC="The Akeeba Backup JSON API allows you to take and manage backups, as well as manage Akeeba Backup options remotely. You need to enable this option if you plan on taking, downloading or manage backups for example with Akeeba Remote CLI, Akeeba UNiTE and backup scheduling services."
COM_AKEEBABACKUP_CONFIG_JSONAPI_ENABLED_LABEL="Enable JSON API (remote backup)"
COM_AKEEBABACKUP_CONFIG_LARGEDIRTHRESHOLD_DESCRIPTION="When a directory contains over this number of files or directories it is considered \"large\". Therefore, Akeeba Backup will try re-scanning it in the next step to avoid backup timeouts. A value too small will cause the backup to considerably slow down. Increase - unless you get timeout errors - to speed up the backup."
COM_AKEEBABACKUP_CONFIG_LARGEDIRTHRESHOLD_TITLE="Large directory threshold"
COM_AKEEBABACKUP_CONFIG_LARGEFILE_DESCRIPTION="Files larger than this threshold will be packed in their own step to prevent the possibility of a timeout. Values between 2 and 10Mb work best on most servers."
COM_AKEEBABACKUP_CONFIG_LARGEFILE_TITLE="Large file threshold"
COM_AKEEBABACKUP_CONFIG_LARGE_DIRTHRESHOLD_DESCRIPTION="How many directories to scan on each step. Recommended setting: 50. Larger values make the backup marginally faster but more likely to time out."
COM_AKEEBABACKUP_CONFIG_LARGE_DIRTHRESHOLD_TITLE="Directory scanning batch size"
COM_AKEEBABACKUP_CONFIG_LARGE_FILESTHRESHOLD_DESCRIPTION="How many files to scan and compress on each step. Recommended setting: 100. Larger values make the backup marginally faster but more likely to time out or run out of memory."
COM_AKEEBABACKUP_CONFIG_LARGE_FILESTHRESHOLD_TITLE="File scanning batch size"
COM_AKEEBABACKUP_CONFIG_LBL_CONFWIZ_AFTER="After Akeeba Backup has finished configuring itself you can take a backup or fine tune its configuration manually."
COM_AKEEBABACKUP_CONFIG_LBL_CONFWIZ_INTRO="It looks like you have not configured Akeeba Backup yet. Click on the Configuration Wizard button below to let it configure itself."
COM_AKEEBABACKUP_CONFIG_LEGACYAPI_ENABLED_DESC="The Legacy Front-end Backup API allows you to take scheduled backups using URL access tools such as wget, curl. You need to enable this option if you plan on taking backups with your host's CRON server using wget or curl; or when you plan on using a third party CRON service such as WebCRON.org. Whenever possible we recommend using the Native CLI CRON script or the Akeeba Backup JSON API instead as they are much more secure options."
COM_AKEEBABACKUP_CONFIG_LEGACYAPI_ENABLED_LABEL="Enable Legacy Front-end Backup API (remote CRON jobs)"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_DEBUG="All Information and Debug"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_DESCRIPTION="This option determines how verbose the backup log will be."
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_ERROR="Errors only"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_INFO="All Information"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_NONE="None"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_TITLE="Log Level"
COM_AKEEBABACKUP_CONFIG_LOGLEVEL_WARNING="Errors and Warnings"
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_ENABLE_DESCRIPTION="Automatically remove old backups based on when the day they were taken on. WARNING: ENABLING THIS WILL CAUSE ALL OTHER QUOTA SETTINGS (COUNT AND SIZE) TO BE IGNORED."
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_ENABLE_TITLE="Enable maximum backup age quotas"
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_KEEPDAY_DESCRIPTION="Backups taken on this day of the month will not be deleted. Leave the default setting, 1, to always preserve the backups taken on the 1st day of the month"
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_KEEPDAY_TITLE="Don't delete backups taken on this day of the month"
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_MAXDAYS_DESCRIPTION="Backups older than this number of days will be automatically deleted. Leave the default setting, 31, to keep all backups from the last month"
COM_AKEEBABACKUP_CONFIG_MAXAGEQUOTA_MAXDAYS_TITLE="Maximum backup age, in days"
COM_AKEEBABACKUP_CONFIG_MAXEXECTIME_DESCRIPTION="Each Akeeba Backup step will last <em>at most</em> as long as defined here. Use a value lower than your PHP maximum execution time. Usually, setting this to 10 seconds is adequate, except on very restrictive hosts.<strong>Tip</strong>: Select Custom and type in your desired value if it's not on the list."
COM_AKEEBABACKUP_CONFIG_MAXEXECTIME_TITLE="Maximum execution time"
COM_AKEEBABACKUP_CONFIG_MAXPACKET_DESCRIPTION="The maximum size, in bytes, of each extended INSERT statement. It is recommended to keep it low enough so that MySQL doesn't throw an error while restoring your database dump."
COM_AKEEBABACKUP_CONFIG_MAXPACKET_TITLE="Max packet size for extended INSERTs"
COM_AKEEBABACKUP_CONFIG_MINEXECTIME_DESCRIPTION="Each Akeeba Backup step will last <em>at least</em> as long as defined here. This is required to work around anti-DoS security solutions. If you get 403 Forbidden or AJAX errors, please increase this setting. Setting it to 0 disables this feature.<br/><br/><strong>Tip</strong>: Select Custom and type in your desired value if it's not on the list."
COM_AKEEBABACKUP_CONFIG_MINEXECTIME_TITLE="Minimum execution time"
COM_AKEEBABACKUP_CONFIG_MYSQL5FEATURES_ENABLE_DESCRIPTION="When enabled, Akeeba Backup will try to dump these advanced MySQL 5 database entities. If your backup hangs during the backup stage, you might have to disable this."
COM_AKEEBABACKUP_CONFIG_MYSQL5FEATURES_ENABLE_TITLE="Dump PROCEDUREs, FUNCTIONs and TRIGGERs"
COM_AKEEBABACKUP_CONFIG_MYSQLNOBTREE_TIP="Removes USING BTREE and USING HASH from table index definitions in dump files. This is required for restoring to servers which have either of the indexing engines turned off (e.g. on newest XAMPP versions). WARNING! THIS MAY CAUSE RESTORATION PROBLEMS ON SOME SERVERS."
COM_AKEEBABACKUP_CONFIG_MYSQLNOBTREE_TITLE="Skip index engine"
COM_AKEEBABACKUP_CONFIG_NODEPENDENCIES_DESCRIPTION="When enabled, Akeeba Backup will not track dependencies between tables and views. Use this only when you have hundreds of database tables and you are not using MySQL VIEWs, FUNCTIONs, PROCEDUREs, TRIGGERs or tables using the (extremely rarely used) TEMPORARY, MEMORY, MERGE or FEDERATED engines."
COM_AKEEBABACKUP_CONFIG_NODEPENDENCIES_TITLE="No dependency tracking"
COM_AKEEBABACKUP_CONFIG_OBSOLETEQUOTA_ENABLE_DESCRIPTION="Total number of obsolete records (backups whose files have been deleted) to keep in the Manage Backups page. Set to 0 for no limit."
COM_AKEEBABACKUP_CONFIG_OBSOLETEQUOTA_ENABLE_TITLE="Obsolete records to keep"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_ACCESSTOKEN_DESCRIPTION="Filled in automatically when you complete the authentication Step 1 above. Do NOT share the same token on many sites. Instead, authenticate each site separately."
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_ACCESSTOKEN_TITLE="Access Token"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_REFRESHDRIVES_TITLE="Reload the list of Drives"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_DRIVE_TITLE="Drive"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_DRIVE_DESCRIPTION="Choose which Drive (OneDrive Personal, OneDrive for Business or SharePoint) your account has access to will be used to store the backups. You need to finish authentication before this list is populated. Only makes sense when you have access to more than one OneDrive drives (e.g. your Microsoft account is part of an organisation's subscription). If unsure use the “Default Drive” option which uses your default personal Drive — typically equivalent to the first “Drive (OneDrive Personal)” option you see below."
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_DRIVE_OPT_PERSONAL="Drive (OneDrive Personal)"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_DIRECTORY_DESCRIPTION="The directory within the Microsoft OneDrive drive to store the backup archives. Please use forward slashes, not backslahes and always put a forward slash in front. Correct: /some/thing. Wrong: some\\thing. A single forward slash means that archives will be stored in the drive's root."
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_REFRESHTOKEN_DESCRIPTION="Filled in automatically when you complete the authentication Step 1 above. Do NOT share the same token on many sites. Instead, authenticate each site separately."
COM_AKEEBABACKUP_CONFIG_ONEDRIVE_REFRESHTOKEN_TITLE="Refresh Token"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_ACTIONLOGS_ENABLED_DESCRIPTION="In Joomla! 3.9 and later user actions are logged inside the database, creating a table with millions of rows and slowing down your backup. Check this option to exclude such data."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_ACTIONLOGS_ENABLED_TITLE="Joomla! User Actions Log"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_DATECONDITIONAL_ENABLED_DESCRIPTION="When enabled, only files modified after a specific date and time will be backed up."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_DATECONDITIONAL_ENABLED_TITLE="Date conditional filter"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_DATECONDITIONAL_START_DESCRIPTION="Akeeba Backup will backup files modified after this date and time. The format is YYYY-MM-DD hh:mm:ss. All dates and times are expressed in your server's timezone."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_DATECONDITIONAL_START_TITLE="Backup files modified after"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_ERRORLOGS_ENABLED_DESCRIPTION="Automatically exclude error log files, e.g. <code>error_log</code>, no matter where they are on the site being backed up. These files change their size while the backup is in progress which may lead to corrupt backups."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_ERRORLOGS_ENABLED_TITLE="Exclude error logs"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_FINDER_ENABLED_DESCRIPTION="Exclude non-critical Smart Search content from the backup. You are strongly recommended to do that for performance reasons. After restoring your site, please go to Components, Smart Search and click on the Index button to rebuild this data."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_FINDER_ENABLED_TITLE="Skip Finder terms and taxonomy tables"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_HOSTSTATS_ENABLED_DESCRIPTION="When enabled, Akeeba Backup will automatically exclude the most common host-specific folders for storing access statistics for your site. These folders are read-only by your web site user, causing restoration issues if they are backed up."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_HOSTSTATS_ENABLED_TITLE="Exclude host-specific stats folders"
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_MYJOOMLA_ENABLED_DESCRIPTION="mySites.guru (formerly myJoomla.com) creates a number of very big database tables on your site instead of storing this information on their service. These tables don't need to be backed up; these tables and their contents will be regenerated on a restored site next time you audit it. We strongly advise excluding this unnecessary database tables to make your backup faster and less bloated."
COM_AKEEBABACKUP_CONFIG_OPTIONALFILTERS_MYJOOMLA_ENABLED_TITLE="Exclude mySites.guru data"
COM_AKEEBABACKUP_CONFIG_OUTDIR_DESCRIPTION="This is the directory on your server where Akeeba Backup will store the backup archives and the backup log file. You can use the following macros:<ul><li><strong>[DEFAULT_OUTPUT]</strong> The default output directory</li><li><strong>[SITEROOT]</strong> Your site's root directory</li><li><strong>[ROOTPARENT]</strong> One directory above your site's root</li></ul>"
COM_AKEEBABACKUP_CONFIG_OUTDIR_TITLE="Output Directory"
COM_AKEEBABACKUP_CONFIG_OVH_CONTAINERURL_DESCRIPTION="THIS IS NOT THE STORAGE CONTAINER NAME! Go to your OVH cloud manager, Servers, expand your server, click on Storage. You will see the Container URL written there above the list of your files. Copy it here."
COM_AKEEBABACKUP_CONFIG_OVH_CONTAINERURL_TITLE="Container URL"
COM_AKEEBABACKUP_CONFIG_OVH_DIRECTORY_DESCRIPTION="The directory within the OVH object storage container to store the backup archives. To store everything on the container's root, please leave blank."
COM_AKEEBABACKUP_CONFIG_OVH_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_OVH_PASSWORD_DESCRIPTION="THIS IS NOT YOUR OVH LOGIN PASSWORD! Create a user from your OVH cloud manager, Servers, expand your server, click on OpenStack, click on Add User. Copy the Password of the created user here."
COM_AKEEBABACKUP_CONFIG_OVH_PASSWORD_TITLE="OpenStack Password"
COM_AKEEBABACKUP_CONFIG_OVH_PROJECTID_DESCRIPTION="Your OVH cloud server project ID. In OVH's cloud manager expand your Server and click on the Storage link. In the main page area you see the name of the server and right below it there is a 32 character alphanumeric string such as a0b1c2d3e4f56789abcdef0123456789. This is the Project ID you need to enter here."
COM_AKEEBABACKUP_CONFIG_OVH_PROJECTID_TITLE="Project ID"
COM_AKEEBABACKUP_CONFIG_OVH_USERNAME_DESCRIPTION="THIS IS NOT YOUR OVH LOGIN USERNAME! Create a user from your OVH cloud manager, Servers, expand your server, click on OpenStack, click on Add User. Copy the ID of the created user here."
COM_AKEEBABACKUP_CONFIG_OVH_USERNAME_TITLE="OpenStack Username"
COM_AKEEBABACKUP_CONFIG_PARTSIZE_DESCRIPTION="Akeeba Backup can create split (multi-part) archives in order to work around size restrictions under various circumstances. This option defines the maximum size of each archive part. If you reduce it to 0, the multi-part feature is disabled.</br><strong>Important:</strong>If you are using a data processing engine which transfers archives to a remote location (e.g. cloud storage) use a setting around 1 to 5 Mb for optimal results."
COM_AKEEBABACKUP_CONFIG_PARTSIZE_TITLE="Part size for split archives"
COM_AKEEBABACKUP_CONFIG_PCLOUD_ACCESSTOKEN_DESCRIPTION="<strong>WARNING! AUTHENTICATION IS NOT WORKING BECAUSE OF ISSUES ON pCloud's API SERVER. THIS POST-PROCESSING ENGINE WILL BE REMOVED IN A FUTURE VERSION OF AKEEBA BACKUP.</strong>. Filled in automatically when you complete the authentication Step 1 above. If you are linking another site to the same pCloud account you should copy the access token from your already set up site and not try to run the authentication step 1 again."
COM_AKEEBABACKUP_CONFIG_PCLOUD_ACCESSTOKEN_TITLE="Access Token"
COM_AKEEBABACKUP_CONFIG_PCLOUD_DIRECTORY_DESCRIPTION="The name of the directory on pCloud where the backup archive will be stored. <strong>The directory MUST already exist, otherwise the upload will fail.</strong>"
COM_AKEEBABACKUP_CONFIG_PCLOUD_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_PERMISSIONS_0600="0600 – Tight security. might cause problems on low end servers"
COM_AKEEBABACKUP_CONFIG_PERMISSIONS_0644="0644 – Medium security, for use on single site servers"
COM_AKEEBABACKUP_CONFIG_PERMISSIONS_0666="0666 – Lax security, maximum compatibility with commercial hosts"
COM_AKEEBABACKUP_CONFIG_PERMISSIONS_DESCRIPTION="Set up the file permissions for the backup archive files. Only applies on Linux, macOS, BSD and other UNIX-style hosts (NOT Windows). If unsure leave as 0666. Changing that may make it impossible to download and / or delete backup archive files over FTP and SFTP. If your server is using PHP-FPM or otherwise runs PHP under the same user as your site's system account use 0600 for best security."
COM_AKEEBABACKUP_CONFIG_PERMISSIONS_TITLE="Archive permissions"
COM_AKEEBABACKUP_CONFIG_PLATFORM="Site overrides"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBDATABASE_DESCRIPTION="The name of the database to backup. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBDATABASE_TITLE="Database name"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBDRIVER_DESCRIPTION="Select the database driver to use when connecting to the site's database. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBDRIVER_TITLE="Database driver"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBHOST_DESCRIPTION="The hostname or IP address of the database server. Usually localhost or 127.0.0.1. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBHOST_TITLE="Database server hostname"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPASSWORD_DESCRIPTION="The password to connect to the site's database. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPORT_DESCRIPTION="(optional) The port the database server listens to. If you are unsure, leave this option empty to use the default port (3306 for MySQL servers). Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPORT_TITLE="Database server port"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPREFIX_DESCRIPTION="The prefix of the database to backup including the underscore, e.g. <code>ex4m_</code>. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBPREFIX_TITLE="Prefix"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBENCRYPTION_TITLE="Connect with an SSL certificate"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBENCRYPTION_DESCRIPTION="Should we connect to the database using an SSL certificate? This can be used instead of username and password authentication (encrypted connection with certificate authentication) or <em>on top of</em> username and password authentication (encrypted connection with password authentication). If you don't know what this means set this option to No and ignore the next few options as well."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCIPHER_TITLE="SSL/TLS Encryption Methods"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCIPHER_DESCRIPTION="Enter a list of encryption methods for connecting with SSL certificates, separated by colons. If left empty the default list (<code>AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-CBC-SHA256:AES256-CBC-SHA384:DES-CBC3-SHA</code>) will be used (recommended)."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCA_TITLE="Certification Authority (CA) file"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCA_DESCRIPTION="Absolute file path to the Certification Authority (CA) certificate PEM file of your database server, e.g. <code>/home/myuser/ca.pem</code>"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLKEY_TITLE="Database user's Private Key file"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLKEY_DESCRIPTION="Absolute file path to the private key PEM file of your database user, e.g. <code>/home/myuser/myuser-key.pem</code>"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCERT_TITLE="Database user's Public Key (Certificate) file"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLCERT_DESCRIPTION="Absolute file path to the public key (certificate) PEM file of your database user, e.g. <code>/home/myuser/myuser.pem</code>"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLVERIFYSERVERCERT_TITLE="Verify server certificate"
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBSSLVERIFYSERVERCERT_DESCRIPTION="Set to Yes to verify the certificate the server sends back to us. This is verified against the Certification Authority (CA) file you specified. If you get connection errors set this to No; some setups (especially those generated by the <code>mysql_ssl_rsa_setup</code>) may disallow a connection if certification verification is enabled. If you enable verification and the CA file field is left blank the server's certificate will be checked against the Certification Authority files your server knows about, see the <code>openssl.cafile</code> and <code>openssl.capath</code> PHP options."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBUSERNAME_DESCRIPTION="The username to connect to the site's database. Only used when the site database override checkbox is ticked."
COM_AKEEBABACKUP_CONFIG_PLATFORM_DBUSERNAME_TITLE="Username"
COM_AKEEBABACKUP_CONFIG_PLATFORM_NEWROOT_DESCRIPTION="When you have enabled the Site Root Override option above, Akeeba Backup will back up all files and directories under this site's root"
COM_AKEEBABACKUP_CONFIG_PLATFORM_NEWROOT_TITLE="Force Site Root"
COM_AKEEBABACKUP_CONFIG_PLATFORM_OVERRIDEDB_DESCRIPTION="When it is unchecked (default) Akeeba Backup will automatically back up the database the site it is installed in connects to (your Joomla! database). When checked, it will back up a different database, using the connection details you provide below."
COM_AKEEBABACKUP_CONFIG_PLATFORM_OVERRIDEDB_TITLE="Site database override"
COM_AKEEBABACKUP_CONFIG_PLATFORM_OVERRIDEROOT_DESCRIPTION="When it is unchecked (default) Akeeba Backup will use back up all files and directories under the root of the site it is installed in. When enabled, it will backup files and directories under the directory selected in Force Site Root below."
COM_AKEEBABACKUP_CONFIG_PLATFORM_OVERRIDEROOT_TITLE="Site root override"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_FTPS_DESCRIPTION="If enabled, Akeeba Backup will try to connect to your FTP server using an SSL-encrypted connection. <strong>This is not the same as SFTP, SCP or \"Secure FTP\"!</strong> Do note that if your server doesn't support this method you will get connection errors."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_FTPS_TITLE="Use FTP over SSL (FTPS)"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_HOST_DESCRIPTION="FTP server's host name, without the protocol. This means that <code>ftp://example.com</code> is <strong>invalid</strong> and <code>example.com</code> is valid. This engine only supports FTP and FTPS servers. It <u>does not</u> support SFTP, SCP and other SSH variants."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_HOST_TITLE="Host name"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_INITDIR_DESCRIPTION="The absolute <strong>FTP</strong> path to the directory where the files will be uploaded. If unsure, connect to your server with FileZilla, browse to the intended directory and copy the path appearing on the right-hand pane above the directory list. It is usually something short, like <code>/public_html</code>."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_INITDIR_TITLE="Initial directory"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_OPTSUBDIR_DESCRIPTION="The relative path to the initial directory, it will be created if it doesn't exists. Leave it empty to upload the archives directly inside the initial directory. You can use the following macros:<ul><li><strong>[HOST]</strong> The host name. WARNING! This tag doesn't work in CRON mode.</li><li><strong>[DATE]</strong> Current date</li><li><strong>[TIME]</strong> Current time</li></ul>More are available; please consult the documentation."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_OPTSUBDIR_TITLE="Subdirectory"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PASSIVE_DESCRIPTION="Use FTP passive mode when transferring data. This is enabled by default as it is the only method which works through firewalls commonly installed on web servers. Do not deactivate unless you are certain that your web server is not behind a firewall and that your FTP server absolutely requires Active mode file transfers."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PASSIVE_TITLE="Use passive mode"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PASSWORD_DESCRIPTION="FTP server's password. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PORT_DESCRIPTION="FTP server's port. The most common setting is 21. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_PORT_TITLE="Port"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_TEST_DESCRIPTION="Use this button to test the FTP connection and view the connection errors on failure."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_TEST_TITLE="Test FTP connection"
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_USER_DESCRIPTION="FTP server's user name. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCFTP_USER_TITLE="User name"
COM_AKEEBABACKUP_CONFIG_POSTPROCPARTS_DESCRIPTION="When enabled, Akeeba Backup will run the post-processing engine against each part as soon as it is complete. When disabled, Akeeba Backup will run the post-processing for all parts at the end of the backup process."
COM_AKEEBABACKUP_CONFIG_POSTPROCPARTS_TITLE="Process each part immediately"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_HOST_DESCRIPTION="SFTP server's host name, without the protocol. This means that <code>sftp://example.com</code> or <code>ssh://example.com</code> is <strong>invalid</strong> and must NOT be used, but <code>example.com</code> is valid and MUST be used. This engine only supports SFTP (SSH) servers. It <u>does not</u> support FTP, FTPS or any other FTP variant. It requires the PHP SSH2 extension to be installed and enabled."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_HOST_TITLE="Host name"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_INITDIR_DESCRIPTION="The absolute <strong>SFTP</strong> path (usually the same as the filesystem path) to the directory where the files will be uploaded. If unsure, connect to your server with FileZilla, browse to the intended directory and copy the path appearing on the right-hand pane above the directory list. It is usually something long, like <code>/home/myuser/public_html</code>."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_INITDIR_TITLE="Initial directory"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PASSWORD_DESCRIPTION="SFTP server's password. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PORT_DESCRIPTION="SFTP server's port. The most common setting is 22. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PORT_TITLE="Port"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PRIVKEY_DESCRIPTION="READ THE DOCUMENTATION BEFORE USING. The absolute filesystem path to an RSA / DSA private key file used to connect to the remote server. If it's encrypted, enter the passphrase in the password field above. If you have no idea what this is, or if you think you have to ask for support about it, leave it blank and don't ask us about it."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PRIVKEY_TITLE="Private Key File (advanced)"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PUBKEY_DESCRIPTION="READ THE DOCUMENTATION BEFORE USING. The absolute filesystem path to an RSA / DSA public key file used to connect to the remote server. If you have no idea what this is, or if you think you have to ask for support about it, leave it blank and don't ask us about it."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_PUBKEY_TITLE="Public Key File (advanced)"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_TEST_DESCRIPTION="Use this button to test the SFTP connection and view the connection errors on failure."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_TEST_TITLE="Test SFTP connection"
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_USER_DESCRIPTION="SFTP server's user name. It is usually case sensitive. If unsure, please contact your network administrator."
COM_AKEEBABACKUP_CONFIG_POSTPROCSFTP_USER_TITLE="User name"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_DIRECTORY_DESCRIPTION="The directory within your iDriveSync account where the backup archives will be stored. Leave blank or set to / to store files inside your account's root."
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_NEWENDPOINT_DESCRIPTION="Starting from mid-2016, new users have to use the new API endpoint"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_NEWENDPOINT_TITLE="Use the new endpoint"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_PASSWORD_DESCRIPTION="Your iDriveSync password"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_PVTKEY_DESCRIPTION="Your iDriveSync private key. Only if you are already using a private key in your iDriveSync account."
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_PVTKEY_TITLE="Private key (optional)"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_USERNAME_DESCRIPTION="The username or e-mail address you've used to subscribe to iDriveSync"
COM_AKEEBABACKUP_CONFIG_POSTPROC_IDRIVESYNC_USERNAME_TITLE="Username or e-mail"
COM_AKEEBABACKUP_CONFIG_PROCEMAIL_ADDRESS_DESCRIPTION="The email address where the backup files will be sent to"
COM_AKEEBABACKUP_CONFIG_PROCEMAIL_ADDRESS_TITLE="Email address"
COM_AKEEBABACKUP_CONFIG_PROCEMAIL_SUBJECT_DESCRIPTION="The subject of the email (optional). This is option is here to primarily help you distinguish between backups from multiple sites."
COM_AKEEBABACKUP_CONFIG_PROCEMAIL_SUBJECT_TITLE="Email subject"
COM_AKEEBABACKUP_CONFIG_PROCENGINE_DESCRIPTION="Post-processing engines allow Akeeba Backup to transfer finalised backup archive parts to other servers and remote storage providers."
COM_AKEEBABACKUP_CONFIG_PROCENGINE_TITLE="Post-processing engine"
COM_AKEEBABACKUP_CONFIG_PUSH_APIKEY_DESC="Go to https://www.pushbullet.com/account and copy the Access Token from that page into the text box here. It is used to send push messages to your account. You may paste several tokens separated by commas. Note: the Access Token is visible to all people who have access to this configuration page."
COM_AKEEBABACKUP_CONFIG_PUSH_APIKEY_LABEL="Pushbullet Access Token"
COM_AKEEBABACKUP_CONFIG_PUSH_HEADER_DESC="Here you can configure push notifications for backup events to be sent directly to your phone, tablet, notebook or desktop computer. You need to download the free-of-charge, third party application <a href='http://pushbullet.com/'>Pushbullet</a> first."
COM_AKEEBABACKUP_CONFIG_PUSH_HEADER_LABEL="Push Notifications"
COM_AKEEBABACKUP_CONFIG_PUSH_PREFERENCE_DESC="Should Akeeba Backup send you notifications and, if so, how? If you select Web Push, save these options and go back to the Control Panel page. You will see a new Push Notification area below the backup Quick Icons where you can manage the push notifications for your browser."
COM_AKEEBABACKUP_CONFIG_PUSH_PREFERENCE_LABEL="Push notifications"
COM_AKEEBABACKUP_CONFIG_PUSH_PREFERENCE_OPT_NONE="Disabled"
COM_AKEEBABACKUP_CONFIG_PUSH_PREFERENCE_OPT_PUSHBULLET="PushBullet"
COM_AKEEBABACKUP_CONFIG_PUSH_PREFERENCE_OPT_WEBPUSH="Web Push (browser API)"
COM_AKEEBABACKUP_CONFIG_QUICKICON_DESC="When checked, Akeeba Backup will display an one-click backup icon at the top of the Control Panel page. Clicking on it will activate this profile and take a backup without any further action necessary from you."
COM_AKEEBABACKUP_CONFIG_QUICKICON_LABEL="One-click backup icon"
COM_AKEEBABACKUP_CONFIG_REMOTEQUOTA_ENABLE_DESCRIPTION="When enabled, the quota settings below will be applied to files stored on remote storage, such as Amazon S3 or remote FTP servers."
COM_AKEEBABACKUP_CONFIG_REMOTEQUOTA_ENABLE_TITLE="Enable remote files quotas"
COM_AKEEBABACKUP_CONFIG_REMOTEQUOTALATEST_TITLE="Current backup participates in remote file quotas"
COM_AKEEBABACKUP_CONFIG_REMOTEQUOTALATEST_DESCRIPTION="When enabled the backup which is in progress participates in the remote file quotas. This can be problematic; if the backup is partially uploaded to the remote storage and the quota settings are such that only the latest backup is preserved you might end up without a valid backup stored remotely. Disabling it will make it less likely that you end up without a valid backup in remote storage at the expense of storing one more backup archive remotely."
COM_AKEEBABACKUP_CONFIG_RUNTIMEBIAS_DESCRIPTION="This defines how conservative Akeeba Backup will be when trying to avoid a time-out. The lower this value, the more conservative it gets. If you get time-out errors, please try decreasing both the Maximum Execution Time and this setting.<strong>Tip</strong>: Select Custom and type in your desired value if it's not on the list."
COM_AKEEBABACKUP_CONFIG_RUNTIMEBIAS_TITLE="Execution time bias"
COM_AKEEBABACKUP_CONFIG_S3ACCESSKEY_DESCRIPTION="Your Amazon S3 Access Key, made available to you under your personal Amazon Web Services profile page"
COM_AKEEBABACKUP_CONFIG_S3ACCESSKEY_TITLE="Access Key"
COM_AKEEBABACKUP_CONFIG_S3BUCKET_DESCRIPTION="Your Amazon S3 bucket name"
COM_AKEEBABACKUP_CONFIG_S3BUCKET_TITLE="Bucket"
COM_AKEEBABACKUP_CONFIG_S3CUSTOMENDPOINT_DESCRIPTION="For use with third party storage services implementing an S3-compatible API. Enter the endpoint (API URL) of the third party storage service's S3-compatible API. IMPORTANT: If you are using Amazon S3 you <strong>MUST LEAVE THIS BLANK</strong>."
COM_AKEEBABACKUP_CONFIG_S3CUSTOMENDPOINT_TITLE="Custom endpoint"
COM_AKEEBABACKUP_CONFIG_S3DIRECTORY_DESCRIPTION="The directory within your bucket where the backup archives will be stored. Leave blank to store files inside the bucket's root."
COM_AKEEBABACKUP_CONFIG_S3DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_S3LEGACY_DESCRIPTION="When enabled, all uploads to Amazon S3 will be forced to be single part. Use this if you get RequestTimeout errors from the S3 engine when uploading backup parts."
COM_AKEEBABACKUP_CONFIG_S3LEGACY_TITLE="Disable multipart uploads"
COM_AKEEBABACKUP_CONFIG_S3RRS_DESCRIPTION="Select the storage class for your data. Standard is the regular storage for business critical data. Please consult the Amazon S3 documentation for the description of each storage class."
COM_AKEEBABACKUP_CONFIG_S3RRS_TITLE="Storage class"
COM_AKEEBABACKUP_CONFIG_S3SECRETKEY_DESCRIPTION="Your Amazon S3 Secret Key, made available to you under your personal Amazon Web Services profile page"
COM_AKEEBABACKUP_CONFIG_S3SECRETKEY_TITLE="Secret Key"
COM_AKEEBABACKUP_CONFIG_S3USESSL_DESCRIPTION="If enabled, a secure (HTTPS) connection will be used when uploading your files. While it increases security of transferred data, it also increases the possibility of backup failure due to timeout."
COM_AKEEBABACKUP_CONFIG_S3USESSL_TITLE="Use SSL"
COM_AKEEBABACKUP_CONFIG_S3_DUALSTACK_DESCRIPTION="Should we use the dual-stack endpoints for Amazon S3? This allows accessing S3 over IPv6 for servers which support IPv6. Servers without IPv6 support will still be able to access S3 over IPv4. It has no effect if you are using a custom endpoint."
COM_AKEEBABACKUP_CONFIG_S3_DUALSTACK_TITLE="Enable IPv6 (dual-stack) support"
COM_AKEEBABACKUP_CONFIG_SAVENEW_DEFAULT_PROFILE_NAME="New backup profile"
COM_AKEEBABACKUP_CONFIG_SAVE_OK="The configuration has been saved"
COM_AKEEBABACKUP_CONFIG_SCANENGINE_DESCRIPTION="Defines how Akeeba Backup will crawl your site's files and folders in order to determine which of them have to be backed up."
COM_AKEEBABACKUP_CONFIG_SCANENGINE_TITLE="Filesystem scanner engine"
COM_AKEEBABACKUP_CONFIG_SECRETWORD_DESC="This password will be used with the Front-end Backup (Legacy API) and JSON API features to protect them against unauthorized access. Akeeba Backup will NOT enable these features unless you use a long, complex password here. Consult the documentation for more information."
COM_AKEEBABACKUP_CONFIG_SECRETWORD_LABEL="Secret word"
COM_AKEEBABACKUP_CONFIG_SECURITY_USEENCRYPTION_DESCRIPTION="When enabled, configuration settings are encrypted using the industry-standard AES-128 encryption."
COM_AKEEBABACKUP_CONFIG_SECURITY_USEENCRYPTION_LABEL="Use encryption"
COM_AKEEBABACKUP_CONFIG_SFTPTEST_BADPREFIX="You are NOT supposed to add the sftp:// prefix to your SFTP Hostname. Please remove the sftp:// prefix and retry."
COM_AKEEBABACKUP_CONFIG_SFTPTEST_NOUPLOAD="Akeeba Backup was able to connect to your server, but it could not upload a test file. Backup upload could fail."
COM_AKEEBABACKUP_CONFIG_SIZEQUOTA_ENABLE_DESCRIPTION="When activated, Akeeba Backup will erase old backup files if the total size of backup archives exceeds the value defined below. This setting is applied <strong>per profile</strong>."
COM_AKEEBABACKUP_CONFIG_SIZEQUOTA_ENABLE_TITLE="Enable size quota"
COM_AKEEBABACKUP_CONFIG_SIZEQUOTA_VALUE_DESCRIPTION="If the total size of backup archives taken with the current profile exceeds this limit, the oldest backups will be deleted from the server.<br/><br/><strong>Tip</strong>: Select Custom and type in your desired value if it's not on the list."
COM_AKEEBABACKUP_CONFIG_SIZEQUOTA_VALUE_TITLE="Size quota"
COM_AKEEBABACKUP_CONFIG_SPLITDBDUMP_DESCRIPTION="Your database dumps will be split in small files to improve compression and avoid file size issues on certain cheap hosts. Ideally, you should use half the size of your Big File Threshold. Set to 0 to disable splitting and creating a single huge dump file per database."
COM_AKEEBABACKUP_CONFIG_SPLITDBDUMP_TITLE="Size for split SQL dump files"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_ACCESS_DESCRIPTION="Enter your Access Key ID. Create one at https://www.sugarsync.com/developer/account"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_ACCESS_TITLE="Access Key ID"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_DIRECTORY_DESCRIPTION="Which directory to store the backup files in. If the first part of the directory doesn't match the name of a SugarSync sync folder, the directory will be created inside your Magic Briefcase folder. You may use the same variables you use for backup archive names, e.g. [HOST] for your site's domain name or [DATE] for the current date."
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_EMAIL_DESCRIPTION="The email address for your SugarSync account"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_EMAIL_TITLE="Email"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_PASSWORD_DESCRIPTION="The password for your SugarSync account"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_PRIVATE_DESCRIPTION="Enter the Private Access Key corresponding to your Access Key ID. Create one at https://www.sugarsync.com/developer/account"
COM_AKEEBABACKUP_CONFIG_SUGARSYNC_PRIVATE_TITLE="Private Access Key"
COM_AKEEBABACKUP_CONFIG_SWIFT_AUTHURL_DESCRIPTION="The endpoint for the Keystone service of your OpenStack installation. DO include the version. DO NOT include the /token suffix. Example: https://authentication.example.com/v2.0"
COM_AKEEBABACKUP_CONFIG_SWIFT_AUTHURL_TITLE="Authentication URL"
COM_AKEEBABACKUP_CONFIG_SWIFT_CONTAINERURL_DESCRIPTION="The API endpoint for your object storage container, e.g. https://storage.example.com/v1/AUTH_abcdef0123456789abcdef0123456789/my-container"
COM_AKEEBABACKUP_CONFIG_SWIFT_CONTAINERURL_TITLE="Container URL"
COM_AKEEBABACKUP_CONFIG_SWIFT_DIRECTORY_DESCRIPTION="The directory within the OpenStack Swift object storage container to store the backup archives. To store everything on the container's root, please leave blank."
COM_AKEEBABACKUP_CONFIG_SWIFT_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_SWIFT_PASSWORD_DESCRIPTION="The OpenStack API password for your cloud."
COM_AKEEBABACKUP_CONFIG_SWIFT_PASSWORD_TITLE="OpenStack Password"
COM_AKEEBABACKUP_CONFIG_SWIFT_TENANTID_DESCRIPTION="Your OpenStack tenant ID (Keystone v2) or project ID (Keystone v3) , e.g. a0b1c2d3e4f56789abcdef0123456789"
COM_AKEEBABACKUP_CONFIG_SWIFT_TENANTID_TITLE="Tenant ID / Project ID"
COM_AKEEBABACKUP_CONFIG_SWIFT_USERNAME_DESCRIPTION="The OpenStack API username for your cloud."
COM_AKEEBABACKUP_CONFIG_SWIFT_USERNAME_TITLE="OpenStack Username"
COM_AKEEBABACKUP_CONFIG_SWIFT_KEYSTONE_VERSION_TITLE="Keystone version"
COM_AKEEBABACKUP_CONFIG_SWIFT_KEYSTONE_VERSION_DESCRIPTION="Choose which version of OpenStack Keystone authentication service is used by your storage provider. If unsure please ask your storage provider."
COM_AKEEBABACKUP_CONFIG_SWIFT_KEYSTONE_VERSION_V2="Keystone v2 (Legacy)"
COM_AKEEBABACKUP_CONFIG_SWIFT_KEYSTONE_VERSION_V3="Keystone v3"
COM_AKEEBABACKUP_CONFIG_SWIFT_DOMAIN_TITLE="Keystone v3 Authentication Domain"
COM_AKEEBABACKUP_CONFIG_SWIFT_DOMAIN_DESCRIPTION="Only used with Keystone v3 authentication. This is the authentication domain for the Keystone v3 service, <strong>NOT</strong> the hostname of the Keystone authentication server. In most cases it's <code>default</code> or <code>Default</code>. If unsure please ask your storage provider."
COM_AKEEBABACKUP_CONFIG_UI_AJAXERRORDLG_TEXT="An error has occurred while waiting for an AJAX response:"
COM_AKEEBABACKUP_CONFIG_UI_AJAXERRORDLG_TITLE="AJAX Error"
COM_AKEEBABACKUP_CONFIG_UI_BROWSE="Browse..."
COM_AKEEBABACKUP_CONFIG_UI_BROWSER_TITLE="Directory Browser"
COM_AKEEBABACKUP_CONFIG_UI_CONFIG="Configure..."
COM_AKEEBABACKUP_CONFIG_UI_CUSTOM="Custom..."
COM_AKEEBABACKUP_CONFIG_UI_FTPBROWSER_TITLE="FTP Directory Browser"
COM_AKEEBABACKUP_CONFIG_UI_REFRESH="Refresh"
COM_AKEEBABACKUP_CONFIG_UI_ROOTDIR="Using the site's root for backup output or temporary file storage will lead to backup failure. I am overriding your setting."
COM_AKEEBABACKUP_CONFIG_UI_SETTINGS_NOTSECURED="Your server does not support encryption of your configuration settings. We strongly advise you not to store any passwords in the configuration."
COM_AKEEBABACKUP_CONFIG_UI_SETTINGS_SECURED="Your settings are secured by 128-bit encryption. You can safely store your passwords in the configuration."
COM_AKEEBABACKUP_CONFIG_UPLOADKICKSTART_DESCRIPTION="When checked a copy of Akeeba Kickstart Professional will be uploaded to the remote storage specified in the Post-processing Engine above (except for the None and Email engines). This makes sense when using FTP or SFTP to transfer your site to a different server: both your backup archive and Kickstart, used to extract it, will be uploaded to your remote server. After the backup is complete you can just launch Kickstart on the remote site and proceed with its restoration. So simple!"
COM_AKEEBABACKUP_CONFIG_UPLOADKICKSTART_TITLE="Upload Kickstart to remote storage"
COM_AKEEBABACKUP_CONFIG_USAGESTATS_DESC="Help us improve our software by anonymously and automatically reporting your PHP, MySQL and Joomla! versions. This information will help us decide which versions of Joomla!, PHP and MySQL to support in future versions. Note: we do NOT collect your site name, IP address or any other directly or indirectly unique identifying information."
COM_AKEEBABACKUP_CONFIG_USAGESTATS_LABEL="Enable anonymous PHP, MySQL and Joomla! version reporting"
COM_AKEEBABACKUP_CONFIG_VIRTUALFOLDER_DESCRIPTION="If you have configured any off-site directories, their contents will appear inside the archive as subdirectories of this virtual directory. It is virtual because it doesn't really exist on your server. It only exists inside the backup archive. Make sure the virtual directory name does not clash with an existing directory in order to avoid data loss."
COM_AKEEBABACKUP_CONFIG_VIRTUALFOLDER_TITLE="Virtual directory for off-site files"
COM_AKEEBABACKUP_CONFIG_WEBDAV_DIRECTORY_DESCRIPTION="Directory"
COM_AKEEBABACKUP_CONFIG_WEBDAV_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFIG_WEBDAV_PASSWORD_DESCRIPTION="Password"
COM_AKEEBABACKUP_CONFIG_WEBDAV_PASSWORD_TITLE="Password"
COM_AKEEBABACKUP_CONFIG_WEBDAV_URL_DESCRIPTION="WebDAV base URL"
COM_AKEEBABACKUP_CONFIG_WEBDAV_URL_TITLE="WebDAV base URL"
COM_AKEEBABACKUP_CONFIG_WEBDAV_USERNAME_DESCRIPTION="Username"
COM_AKEEBABACKUP_CONFIG_WEBDAV_USERNAME_TITLE="Username"
COM_AKEEBABACKUP_CONFIG_WHERE_ARE_THE_FILTERS="If you are looking for the filters &ndash;e.g. for excluding files, directories and database tables&ndash; please click on the Cancel button to get back to the Control Panel page where you can access these features directly."
COM_AKEEBABACKUP_CONFIG_ZIPCDGLUECHUNKSIZE_DESCRIPTION="ZIP files are comprised of a data section and a \"directory\" section. Those sections are processed in parallel by Akeeba Backup and joined during the archive finalisation stage. This parameter determines how much data will be processed at once during this stage. You shouldn't need to change this setting unless you have severe memory exhaustion problems."
COM_AKEEBABACKUP_CONFIG_ZIPCDGLUECHUNKSIZE_TITLE="Chunk size for Central Directory processing"
COM_AKEEBABACKUP_CONFIG__BACKBLAZE_DIRECTORY_TITLE="Directory"
COM_AKEEBABACKUP_CONFWIZ="Configuration Wizard"
COM_AKEEBABACKUP_CONFWIZ_CONGRATS="Congratulations! You have completed the automatic configuration wizard. You can now test your new configuration by running a backup, or fine-tune them in the Configuration page."
COM_AKEEBABACKUP_CONFWIZ_DBOPT="Optimising Database Dump engine settings"
COM_AKEEBABACKUP_CONFWIZ_DIRECTORY="Examining Output Directory"
COM_AKEEBABACKUP_CONFWIZ_HEADER_FAILED="Configuration Wizard Failure"
COM_AKEEBABACKUP_CONFWIZ_HEADER_FINISHED="Finished Benchmarking"
COM_AKEEBABACKUP_CONFWIZ_INTROTEXT="The Configuration Wizard runs a series of benchmarks on your server to determine the optimal backup settings for your site. Please do not navigate away from this page. It is normal to appear frozen for periods up to three (3) minutes, depending on your server speed."
COM_AKEEBABACKUP_CONFWIZ_MAXEXEC="Optimising the maximum execution time"
COM_AKEEBABACKUP_CONFWIZ_MINEXEC="Optimising the minimum execution time"
COM_AKEEBABACKUP_CONFWIZ_PROGRESS="Server environment analysis in progress"
COM_AKEEBABACKUP_CONFWIZ_SPLITSIZE="Determining the required part size for split archives"
COM_AKEEBABACKUP_CONFWIZ_UI_CANTDBOPT="Akeeba Backup could not determine the optimal database dump settings. Make sure your server runs on MySQL 5.0 or later and that your database user is allowed to run the SHOW TABLE STATUS command before running this wizard again."
COM_AKEEBABACKUP_CONFWIZ_UI_CANTDETERMINEMINEXEC="Could not determine the minimum execution time. This indicates a severe problem communicating with your server. Please try configuring Akeeba Backup manually."
COM_AKEEBABACKUP_CONFWIZ_UI_CANTDETERMINEPARTSIZE="Akeeba Backup could not determine a part size suitable for your server. Please ensure you have adequate free space on your account and run this wizard again."
COM_AKEEBABACKUP_CONFWIZ_UI_CANTFIXDIRECTORIES="Akeeba Backup could not find a writable output and temporary directory. Please give write permissions to the administrator/components/com_akeebabackup/backup directory and run this wizard again."
COM_AKEEBABACKUP_CONFWIZ_UI_CANTSAVEMAXEXEC="Akeeba Backup could not save the maximum execution time preferences. You will have to configure it manually."
COM_AKEEBABACKUP_CONFWIZ_UI_CANTSAVEMINEXEC="Could not save the minimum execution time preference. You will have to configure Akeeba Backup manually."
COM_AKEEBABACKUP_CONFWIZ_UI_EXECTOOLOW="Akeeba Backup detected that your server requires a maximum execution time that is too low to be practical. You are better off switching hosts or asking your host to increase PHP's maximum execution time and lift any CPU usage limitations from your account."
COM_AKEEBABACKUP_CONFWIZ_UI_MINEXECTRY="Trying %s seconds"
COM_AKEEBABACKUP_CONFWIZ_UI_PARTSIZE="Testing a part size of %s Mb"
COM_AKEEBABACKUP_CONFWIZ_UI_SAVEMINEXEC="Saving the minimum execution time preference"
COM_AKEEBABACKUP_CONFWIZ_UI_SAVINGMAXEXEC="Saving maximum execution time preference"
COM_AKEEBABACKUP_CONFWIZ_UI_TRYAJAX="Trying to make an asynchronous AJAX request to your server"

COM_AKEEBABACKUP_CONTROLPANEL="Control Panel"
COM_AKEEBABACKUP_CONTROLPANEL_BTN_HIDE="Remind me in 15 days"
COM_AKEEBABACKUP_CONTROLPANEL_BTN_LEARNMORE="Learn more about <strong>Akeeba Backup Professional</strong>"
COM_AKEEBABACKUP_CONTROLPANEL_HEAD_LBL_DISCOUNT="Use the coupon code <strong>%s</strong> to subscribe with a <strong>20%%</strong> introductory discount."
COM_AKEEBABACKUP_CONTROLPANEL_HEAD_LBL_PROUPSELL_1="Add scheduled backups, automatic upload to 40+ cloud storage providers, integrated restoration, a site transfer wizard and much more with <strong>Akeeba Backup Professional</strong>."
COM_AKEEBABACKUP_CONTROLPANEL_HEAD_LBL_PROUPSELL_2="A single license is valid for <strong>unlimited sites</strong>. It includes support from the developers who write this software."
COM_AKEEBABACKUP_CONTROLPANEL_HEAD_PROUPSELL="Make your life easier"
COM_AKEEBABACKUP_CONTROLPANEL_MSG_REBUILTTABLES="<h3>Oops! Your Akeeba Backup database tables are corrupt.</h3><p>Akeeba Backup has detected that its database tables were missing or corrupt. Logged in as a Super User to your site's administrator backend, please go to the System menu item in the sidebar Joomla menu. Select the Database link in the Maintenance pane. Select the Akeeba Backup item from the list and click on the Update Structure button in the toolbar to fix the database table issues. Then retry accessing Akeeba Backup.</p>"
COM_AKEEBABACKUP_CONTROLPANEL_WARN_PERMS_L1="Akeeba Backup could not determine the permissions of the <code>media/com_akeebabackup</code> directory."
COM_AKEEBABACKUP_CONTROLPANEL_WARN_PERMS_L2="Please do one of the following:"
COM_AKEEBABACKUP_CONTROLPANEL_WARN_PERMS_L3A="Activate Joomla!'s FTP mode in Global Configuration"
COM_AKEEBABACKUP_CONTROLPANEL_WARN_PERMS_L3B="Change the permissions of the <code>media/com_akeebabackup</code> directory and all of its subdirectories to 0755 and all of its files to 0644 using your FTP client."
COM_AKEEBABACKUP_CONTROLPANEL_WARN_PERMS_L4="Akeeba Backup <strong><u>will most likely not work at all</u></strong> if you do not perform these steps. If you see this message please follow the instructions in it before asking for support. It will save you a lot of time."
COM_AKEEBABACKUP_CONTROLPANEL_WARN_WARNING="WARNING"
COM_AKEEBABACKUP_CPANEL_BTN_FESECRETWORD_RESET="Apply the suggested Secret Word"
COM_AKEEBABACKUP_CPANEL_BTN_FIXSECURITY="Fix the security of my backups"
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_BANNED="The secret word is a known bad password. Please do not dictionary words, movie / series names, the names of your loved ones or pets."
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_HEADER="The front-end and remote backup features are disabled"
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_INTRO="Your <em>Secret Word</em> is insecure and can be easily guessed. In order to protect your site Akeeba Backup has disabled access to front-end and remote backup until you enter a secure Secret Word. The problem detected is:"
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_RESET="Could not change the Secret Word"
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_TOOSHORT="The secret word is too short. Use a secret word at least 8 characters long."
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_TOOSIMPLE="The secret word is too simple. Try using lower and upper case letters, numbers and punctuation."
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_WHATTODO_COMMON="Alternatively, click the button below to reset the secret word to the suggested value <code>%s</code> In either case you will need to update your remote backup services and/or CRON jobs with the new Secret Word."
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_WHATTODO_JOOMLA="Please click on Options, Front-end and enter a more complex secret word."
COM_AKEEBABACKUP_CPANEL_ERR_FESECRETWORD_WHATTODO_SOLO="Please click on System Configuration, Public API and enter a more complex secret word."
COM_AKEEBABACKUP_CPANEL_ERR_INVALIDDOWNLOADID="Invalid Download ID format. Please follow our instructions to get your Download ID. Do not enter your username, e-mail address or password in this box."
COM_AKEEBABACKUP_CPANEL_HEADER_ADVANCED="Advanced Operations"
COM_AKEEBABACKUP_CPANEL_HEADER_BASICOPS="Basic Operations"
COM_AKEEBABACKUP_CPANEL_HEADER_INCLUDEEXCLUDE="Include and Exclude Information"
COM_AKEEBABACKUP_CPANEL_HEADER_QUICKBACKUP="One-click Backup"
COM_AKEEBABACKUP_CPANEL_HEADER_TROUBLESHOOTING="Troubleshooting"
COM_AKEEBABACKUP_CPANEL_HEAD_OUTDIR_INSECURE="Insecure output directory"
COM_AKEEBABACKUP_CPANEL_HEAD_OUTDIR_INSECURE_ALT="Possibly insecure output directory and backup filename"
COM_AKEEBABACKUP_CPANEL_HEAD_OUTDIR_INVALID="Invalid output directory"
COM_AKEEBABACKUP_CPANEL_HEAD_OUTDIR_UNFIXABLE="Unfixable output directory security issue"
COM_AKEEBABACKUP_CPANEL_LABEL_STATUSSUMMARY="Status Summary"
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_CLICKTHEBUTTON="Click the button below to fix this issue. Here's what it does."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_DELETEORBEHACKED="Until you do that we <strong>VERY STRONGLY RECOMMEND</strong> not taking a backup of your site and, if you already had, delete all backup archives and backup log files. <strong>FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VERY LIKELY RESULT IN YOUR SITE BEING COMPROMISED (HACKED) AND YOUR BACKUPS BEING MOST LIKELY UNUSABLE.</strong>"
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_FILEREADABLE="Akeeba Backup detected that your backup output directory <code>%s</code> is under your site's web root. Its contents, including your backup archives, are accessible over the web. However, it is NOT possible to list the files in the directory with a web browser. <strong>This can be a security issue</strong>. An attacker can guess the name of the backup archive and download it directly, bypassing your site's security."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_FIX_RANDOM="Your “Backup output filename” will be amended to include the <code>[RANDOM]</code> variable in it. This makes guessing the backup filenames practically impossible by adding 16 different, random letters and / or numbers in the backup archive filename every time you take a backup."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_FIX_SECURITYFILES="A <code>.htaccess</code> and a <code>web.config</code> file will be written to that folder. On most servers this is enough to prevent direct web downloads of any file inside it and disables the listing of its files. We also have a solution for the servers where these special files don't have an effect. Another three files called <code>index.php</code>, <code>index.html</code> and <code>index.htm</code> will also be written to that folder. These index files prevent the web server from listing the names of the backup archives and backup log files."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_ISSYSTEM="Moreover, your output directory is the same as or a subdirectory of a folder that is used by Joomla and its extensions for its own, publicly accessible files."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_ISSYSTEM_FIX="You need go to the Configuration page of Akeeba Backup and select a different output directory."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_LISTABLE="Akeeba Backup detected that your backup output directory <code>%s</code> is under your site's web root. Its contents, including your backup archives, are accessible over the web. Moreover, it's possible to list the files in the directory i.e. it gives a listing of your backup archives when you access it with a web browser. <strong>This is a major security issue</strong>. An attacker can access this folder from a web browser and download your backup archives directly, bypassing your site's security."
COM_AKEEBABACKUP_CPANEL_LBL_OUTDIR_TRASHHOST="Unfortunately, your server does not support any reasonable method to secure the directory. No matter what we do it will always list the names of the files it contains and allow you to download them from a browser. Your one and only option is to create a backup output directory above your site's root."
COM_AKEEBABACKUP_CPANEL_LBL_STATUS_ERROR="Detected errors prohibit intended operation"
COM_AKEEBABACKUP_CPANEL_LBL_STATUS_OK="Akeeba Backup is ready to backup your site"
COM_AKEEBABACKUP_CPANEL_LBL_STATUS_WARNING="Akeeba Backup is ready to backup your site, but there are potential issues"
COM_AKEEBABACKUP_CPANEL_LBL_UNWRITABLE="Unwritable"
COM_AKEEBABACKUP_CPANEL_LBL_WRITABLE="Writable"
COM_AKEEBABACKUP_CPANEL_MSG_CLOUDFLARE_WARN1="We have detected that CloudFlare Rocket Loader is enabled on your site. This feature will interfere with JavaScript on your site, mixing up the order scripts are loaded therefore causing JavaScript errors. Please disable the Rocket Loader feature to let Joomla's and Akeeba Backup's JavaScript work correctly. For further information and instructions please refer to <a href='%s' target='_blank'>CloudFlare's documentation</a>."
COM_AKEEBABACKUP_CPANEL_MSG_CLOUDFLARE_WARN="CloudFlare's Rocket Loader will prevent you from using Joomla!&trade; and Akeeba Backup correctly"
COM_AKEEBABACKUP_CPANEL_MSG_FESECRETWORD_RESET="The Secret Word has been changed to <code>%s</code>"
COM_AKEEBABACKUP_CPANEL_MSG_JOOMLABUGGYUPDATES="<strong>Important:</strong> If Joomla has already determined there are updates for Akeeba Backup before you entered your Download ID it <em>may not be able to download them</em> even after you have entered your Download ID due to a number of long-standing Joomla bugs. In this case please download the ZIP file of the latest version from our site. Then go to Joomla's System menu, find the Install pane, click on Extensions, click on the Upload Package File tab and install the ZIP file you downloaded <strong>twice</strong> in a row, <strong>without</strong> uninstalling Akeeba Backup before or in between. The double installation is required to address another long-standing bug in Joomla which sometimes prevents it from copying all of the updated files when installing an extension update."
COM_AKEEBABACKUP_CPANEL_MSG_MUSTENTERDLID="You need to enter your Download ID"
COM_AKEEBABACKUP_CPANEL_MSG_WHERETOENTERDLID="Go to Joomla's System menu from the left hand side. Find the Update pane and click on the Update Sites link. Find the “Akeeba Backup Professional” item and click on it. Alternatively, <a href=\"%s\">click here</a> to go directly to that page. Enter your Download ID — either your Main ID or an add-on Download ID — in the “Download Key” box and click on the Save button."
COM_AKEEBABACKUP_CPANEL_PROFILE_BUTTON="Switch Profiles"
COM_AKEEBABACKUP_CPANEL_PROFILE_SWITCH_ERROR="Error switching the active profile"
COM_AKEEBABACKUP_CPANEL_PROFILE_SWITCH_OK="Profile changed successfully"
COM_AKEEBABACKUP_CPANEL_PROFILE_TITLE="Active Profile"
COM_AKEEBABACKUP_CPANEL_WARNING_Q001="Output directory unwritable"
COM_AKEEBABACKUP_CPANEL_WARNING_Q003="Using site root as Output or Temporary directory"
COM_AKEEBABACKUP_CPANEL_WARNING_Q004="PHP memory_limit too low"
COM_AKEEBABACKUP_CPANEL_WARNING_Q013="Using component folder as Output directory"
COM_AKEEBABACKUP_CPANEL_WARNING_Q101="Output directory is restricted by open_basedir"
COM_AKEEBABACKUP_CPANEL_WARNING_Q103="Maximum execution time is too low"
COM_AKEEBABACKUP_CPANEL_WARNING_Q104="Temp directory is the same as the site root"
COM_AKEEBABACKUP_CPANEL_WARNING_Q106="Your database table name prefix contains one or more uppercase letters"
COM_AKEEBABACKUP_CPANEL_WARNING_Q201="Outdated PHP version"
COM_AKEEBABACKUP_CPANEL_WARNING_Q202="CRC calculation issue"
COM_AKEEBABACKUP_CPANEL_WARNING_Q203="Default output directory in use"
COM_AKEEBABACKUP_CPANEL_WARNING_Q204="Disabled functions may affect operation"
COM_AKEEBABACKUP_CPANEL_WARNING_Q401="ZIP format selected"
COM_AKEEBABACKUP_CPANEL_WARNING_QNONE="No problems detected"
COM_AKEEBABACKUP_CPANL_ERR_MBSTRING_TITLE="Your version of PHP does not have the mbstring extension installed or activated."
COM_AKEEBABACKUP_CPANL_ERR_MBSTRING_BODY="Having it enabled is a Joomla! requirement. Joomla! and Akeeba Backup will not work properly. Please ask your host to enable the mbstring extension on PHP %s running on your server."

COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_HEAD="Push Notifications"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_SUMMARY="Manage push notifications in your browser"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_DETAILS="Push notifications are managed per browser and device through the browser's Push API. Some older browsers may not support push notifications. Please read the documentation for more information."
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_LBL_UNAVAILABLE_HEAD="Push Notifications are not available"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_LBL_UNAVAILABLE_BODY="Your browser does not support the Push API. Please use a recent version of Firefox, Chrome, Edge, Opera and other browsers with support for the Web Push API. <br/><small>The Push API is also supported on Safari in macOS Ventura and later, as well as iOS 16.1 and later.</small>"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_LBL_UNAVAILABLE_SERVER_BODY="Your server does not meet the minimum requirements to use the browser's Push API to send notifications. Please consult the documentation for the list of requirements for this feature."
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_BTN_SUBSCRIBE="Enable Push Notifications"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_BTN_UNSUBSCRIBE="Disable Push Notifications"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_HELLO_TITLE="Akeeba Backup notifications enabled on %s"
COM_AKEEBABACKUP_CONTROLPANEL_WEBPUSH_HELLO_BODY="This message confirms that enabling push notifications worked and shows you what Akeeba Backup notifications will look like."

COM_AKEEBABACKUP_DBFILTER="Database Tables Exclusion"
COM_AKEEBABACKUP_DBFILTER_LABEL_EXCLUDENONCORE="Exclude non-core tables"
COM_AKEEBABACKUP_DBFILTER_LABEL_NUKEFILTERS="Reset all filters"
COM_AKEEBABACKUP_DBFILTER_LABEL_ROOTDIR="Current database:"
COM_AKEEBABACKUP_DBFILTER_LABEL_SITEDB="Site's main database"
COM_AKEEBABACKUP_DBFILTER_LABEL_TABLES="Database tables, views, procedures, functions and triggers"
COM_AKEEBABACKUP_DBFILTER_TABLE_FUNCTION="Stored function"
COM_AKEEBABACKUP_DBFILTER_TABLE_META_ROWCOUNT="Number of rows"
COM_AKEEBABACKUP_DBFILTER_TABLE_MISC="Merge, temporary, memory, federated, blackhole or miscellaneous table type<br/>Its data is never backed up by Akeeba Backup."
COM_AKEEBABACKUP_DBFILTER_TABLE_PROCEDURE="Stored procedure"
COM_AKEEBABACKUP_DBFILTER_TABLE_TABLE="Database table"
COM_AKEEBABACKUP_DBFILTER_TABLE_TRIGGER="Database trigger"
COM_AKEEBABACKUP_DBFILTER_TABLE_VIEW="MySQL View"
COM_AKEEBABACKUP_DBFILTER_TABLE_TEMP="Temporary table"
COM_AKEEBABACKUP_DBFILTER_TABLE_UNKNOWN="Other database entity type"
COM_AKEEBABACKUP_DBFILTER_TYPE_REGEXTABLEDATA="Do not backup a table's contents"
COM_AKEEBABACKUP_DBFILTER_TYPE_REGEXTABLES="Exclude a table"
COM_AKEEBABACKUP_DBFILTER_TYPE_TABLEDATA="Do not backup its contents"
COM_AKEEBABACKUP_DBFILTER_TYPE_TABLES="Exclude this"

COM_AKEEBABACKUP_DISCOVER="Import Archives"
COM_AKEEBABACKUP_DISCOVER_ERROR_NODIRECTORY="You have not selected a valid directory"
COM_AKEEBABACKUP_DISCOVER_ERROR_NOFILES="There are no archive files to import in the selected directory. Please go back and select another directory."
COM_AKEEBABACKUP_DISCOVER_ERROR_NOFILESSELECTED="You didn't select any files to import."
COM_AKEEBABACKUP_DISCOVER_LABEL_DIRECTORY="Directory"
COM_AKEEBABACKUP_DISCOVER_LABEL_FILES="Archive Files Detected"
COM_AKEEBABACKUP_DISCOVER_LABEL_GOBACK="Go back to the directory selection"
COM_AKEEBABACKUP_DISCOVER_LABEL_IMPORT="Import the files"
COM_AKEEBABACKUP_DISCOVER_LABEL_IMPORTDONE="Import operation completed successfully."
COM_AKEEBABACKUP_DISCOVER_LABEL_IMPORTEDDESCRIPTION="Imported backup archive"
COM_AKEEBABACKUP_DISCOVER_LABEL_S3IMPORT="Are your archives stored on Amazon S3? Click <a href=\"%s\">here</a> to download and import them in a single step!"
COM_AKEEBABACKUP_DISCOVER_LABEL_SCAN="Scan for files"
COM_AKEEBABACKUP_DISCOVER_LABEL_SELECTDIR="Select a directory containing backup archives"
COM_AKEEBABACKUP_DISCOVER_LABEL_SELECTFILES="Please select the files to import. Hold the CTRL or Command key while clicking on the files in order to make a multiple files selection."

COM_AKEEBABACKUP_EMAIL_POSTPROCESSING_FAILED="Post-processing (upload to remote storage) has FAILED."
COM_AKEEBABACKUP_EMAIL_POSTPROCESSING_SUCCESS="Post-processing (upload to remote storage) was successful."

COM_AKEEBABACKUP_FILEFILTERS="Files and Directories Exclusion"
COM_AKEEBABACKUP_FILEFILTERS_EDITOR_TITLE="Edit"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_ADDNEWFILTER="Add new filter:"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_DIRS="Subdirectories"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_FILES="Files"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_FILTERITEM="Filter Item"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_NORMALVIEW="Browser View"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_NUKEFILTERS="Reset all filters"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_ROOTDIR="Root directory:"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_TABULARVIEW="Summary View"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_TYPE="Type"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_UIERRORFILTER="An error occurred while applying the filter for &quot;%s&quot;."
COM_AKEEBABACKUP_FILEFILTERS_LABEL_UIROOT="&lt;root&gt;"
COM_AKEEBABACKUP_FILEFILTERS_LABEL_VIEWALL="List all exclusions"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_APPLYTOALLDIRS="Apply to all listed folders"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_APPLYTOALLFILES="Apply to all listed files"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_DIRECTORIES="Exclude Directory"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_DIRECTORIES_ALL="Exclude all directories"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_FILES="Exclude File"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_FILES_ALL="Exclude all files"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_SKIPDIRS="Skip Subdirectories"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_SKIPDIRS_ALL="Skip all directories"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_SKIPFILES="Skip Files"
COM_AKEEBABACKUP_FILEFILTERS_TYPE_SKIPFILES_ALL="Skip all files"
COM_AKEEBABACKUP_FILTER_SELECT_QUICKICON="– One-click backup icon –"

COM_AKEEBABACKUP_INCLUDEFOLDER="Off-site Directories Inclusion"
COM_AKEEBABACKUP_INCLUDEFOLDER_LABEL_DIRECTORY="Directory"
COM_AKEEBABACKUP_INCLUDEFOLDER_LABEL_DIRECTORY_HELP="The directory on your server which will be included in the backup. This feature is meant only for directories located outside your site's root. Directories inside the site's root are always backed-up automatically, unless you exclude them using the File and Directory Exclusion feature."
COM_AKEEBABACKUP_INCLUDEFOLDER_LABEL_VINCLUDEDIR="Virtual subdirectory"
COM_AKEEBABACKUP_INCLUDEFOLDER_LABEL_VINCLUDEDIR_HELP="The files are stored in the archive inside a subdirectory of the Virtual directory for off-site files, defined in your configuration (default: external_files). You can customise the name of that directory. Set it to a single forward slash (it's this character: /) and your external files will be placed inside your site's root. This is useful if you want to override certain files in the backup, e.g. your configuration.php file or customise the template of the installation script."

COM_AKEEBABACKUP_LBL_BATCH_COPY="Copy"
COM_AKEEBABACKUP_LBL_CPANEL_NEEDSDLID="You must enter your <strong>Download ID</strong> before you can update Akeeba Backup Professional and use some of its remote storage features. <a href='%s' target='_blank'>If you don't know your download ID, please click here</a>."
COM_AKEEBABACKUP_LBL_CPANEL_NEEDSUPGRADE_HEAD="Entering the Download ID is not sufficient for enabling Akeeba Backup Professional's features"
COM_AKEEBABACKUP_LBL_CPANEL_NEEDSUPGRADE_BODY="You will need to download and install the Akeeba Backup Professional package on your site <em>twice</em>, without uninstalling the Core version. For more information and detailed instructions please take a look at our <a href='%s'>video tutorial on upgrading Akeeba Backup Core to Professional</a>."
COM_AKEEBABACKUP_LBL_PROFILES_SAVED="The profile was successfully saved"
COM_AKEEBABACKUP_LBL_PROFILE_COPIED="The Profile and its associated settings have been copied successfully"
COM_AKEEBABACKUP_LBL_PROFILE_DELETED="The Profile has been successfully deleted"
COM_AKEEBABACKUP_LBL_PROFILE_SAVED="The Profile was saved successfully"

COM_AKEEBABACKUP_LOG="View Log"
COM_AKEEBABACKUP_LOG_CHOOSE_FILE_TITLE="Please choose a log file to display:"
COM_AKEEBABACKUP_LOG_CHOOSE_FILE_VALUE="- Select a backup origin -"
COM_AKEEBABACKUP_LOG_ERROR_LOGFILENOTEXISTS="The log file does not exist in your output directory"
COM_AKEEBABACKUP_LOG_ERROR_UNREADABLE="The log file is unreadable"
COM_AKEEBABACKUP_LOG_LABEL_DOWNLOAD="Download log file"
COM_AKEEBABACKUP_LOG_NONE_FOUND="No log file was found"
COM_AKEEBABACKUP_LOG_SHOW_LOG="Show log"
COM_AKEEBABACKUP_LOG_SIZE_WARNING="Your log file is %s Mb big. Trying to display it in the browser may crash the browser or cause a timeout error on your server. Please use the Download Log button above to download the log file to your computer instead. You can open and read the log with any plain text editor."

COM_AKEEBABACKUP_MULTIDB="Multiple Databases Definitions"
COM_AKEEBABACKUP_MULTIDB_ERR_MISSINGINFO="You must specify a database driver, hostname, username, password and database name at a minimum."
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_CANCEL="Cancel"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_CONNECTFAIL="Could not connect to database. Please check your settings. Last error:"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_CONNECTOK="Connected to database!"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_DATABASE="Database name"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_DRIVER="Database driver"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_HOST="Database server hostname"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_LOADING="Loading; please wait..."
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_PASSWORD="Password"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_PORT="Database server port"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_PREFIX="Prefix"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_SAVE="Save"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_SAVEFAIL="Saving failed; please retry"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_TEST="Test Connection"
COM_AKEEBABACKUP_MULTIDB_GUI_LBL_USERNAME="Username"
COM_AKEEBABACKUP_MULTIDB_LABEL_DATABASE="Database name"
COM_AKEEBABACKUP_MULTIDB_LABEL_HOST="Database server host name"

COM_AKEEBABACKUP_PROFILES="Profiles Management"
COM_AKEEBABACKUP_PROFILES_BTN_EXPORT="Export"
COM_AKEEBABACKUP_PROFILES_BTN_PUBLISH="Enable one-click backup icon"
COM_AKEEBABACKUP_PROFILES_BTN_RESET="Reset"
COM_AKEEBABACKUP_PROFILES_BTN_UNPUBLISH="Disable one-click backup icon"
COM_AKEEBABACKUP_PROFILES_ERROR_RESET_FAILED="Resetting the configuration and filters of the backup profile failed. Reason: %s"
COM_AKEEBABACKUP_PROFILES_ERR_IMPORT_FAILED="Profile import failed"
COM_AKEEBABACKUP_PROFILES_ERR_IMPORT_INVALID="Invalid file. This doesn't look like an exported profile .json file."
COM_AKEEBABACKUP_PROFILES_FILTER_SEARCH_DESC="Find a profile by entering its partial description. Find a profile by its ID using the syntax <code>id:123</code> where 123 is the numeric profile ID."
COM_AKEEBABACKUP_PROFILES_FILTER_SEARCH_LABEL="Description"
COM_AKEEBABACKUP_PROFILES_HEADER_IMPORT="Import"
COM_AKEEBABACKUP_PROFILES_IMPORT="Import"
COM_AKEEBABACKUP_PROFILES_LABEL_DESCRIPTION="Profile Description"
COM_AKEEBABACKUP_PROFILES_LABEL_DESCRIPTION_TOOLTIP="Enter a description for this profile. It doesn&apos;t have to be unique and is only used to help you with distinguishing individual profiles."
COM_AKEEBABACKUP_PROFILES_LBL_IMPORT_HELP="Select an exported profile .json file from this or a different site to quickly import its settings."
COM_AKEEBABACKUP_PROFILES_MSG_IMPORT_COMPLETE="Profile successfully imported"
COM_AKEEBABACKUP_PROFILES_N_ITEMS_DELETED="%d backup profiles have been deleted."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_DELETED_1="The backup profile has been deleted."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_PUBLISHED="One-click backup was enabled for %d profiles."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_PUBLISHED_1="One-click backup was enabled for the profile."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_RESET="The configuration and filters of %d backup profiles have been reset."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_RESET_1="The backup profile's configuration and filters have been reset."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_UNPUBLISHED="One-click backup was disabled for %d profiles."
COM_AKEEBABACKUP_PROFILES_N_ITEMS_UNPUBLISHED_1="One-click backup was disabled for the profile."
COM_AKEEBABACKUP_PROFILES_PAGETITLE_EDIT="Edit a Backup Profile"
COM_AKEEBABACKUP_PROFILES_PAGETITLE_NEW="New Backup Profile"
COM_AKEEBABACKUP_PROFILES_TABLE_CAPTION="Table of backup profiles"
COM_AKEEBABACKUP_PROFILE_ERR_CANNOTDELETEACTIVE="You can not delete the currently active profile. Please go to the Control Panel page, select a different profile and then come back to this page to delete profile #%d."
COM_AKEEBABACKUP_PROFILE_ERR_CANNOTDELETEDEFAULT="You can not delete the default profile (the one with id=1)"
COM_AKEEBABACKUP_PROFILE_ERR_NOACCESS="You do not have access to this backup profile"

COM_AKEEBABACKUP_PUSH_ENDBACKUP_FAIL_BODY="Akeeba Backup has detected that the backup of your site \"%s\" located in %s has failed."
COM_AKEEBABACKUP_PUSH_ENDBACKUP_FAIL_BODY_WITH_MESSAGE="Akeeba Backup has detected that the backup of your site \"%s\" located in %s has failed. The backup failure message is:\n%s"
COM_AKEEBABACKUP_PUSH_ENDBACKUP_FAIL_SUBJECT="Failed backup for %s"
COM_AKEEBABACKUP_PUSH_ENDBACKUP_SUCCESS_BODY="Akeeba Backup has successfully finished backing up your site \"%s\" located in %s on %s."
COM_AKEEBABACKUP_PUSH_ENDBACKUP_SUCCESS_SUBJECT="Successful backup for %s"
COM_AKEEBABACKUP_PUSH_ENDBACKUP_WARNINGS_BODY="Akeeba Backup has finished backing up your site \"%s\" located in %s on %s but warnings have been issued. This could mean that files have not been backed up or, if you are automatically uploading the backup to remote storage, the upload may have failed\nYou have to review the warnings and make sure that your backup has completed successfully. We advise you to always test a backup which resulted in warnings being issued to make sure that it is working properly. You can do so by restoring it to a local server. Remember that an untested backup is as good as no backup at all."
COM_AKEEBABACKUP_PUSH_ENDBACKUP_WARNINGS_SUBJECT="Backup finished with warnings for %s"
COM_AKEEBABACKUP_PUSH_STARTBACKUP_BODY="Akeeba Backup has begun taking a backup of site \"%s\" located in %s on %s."
COM_AKEEBABACKUP_PUSH_STARTBACKUP_SUBJECT="Backup started for %s"

COM_AKEEBABACKUP_REGEXDBFILTERS="RegEx Database Tables Exclusion"
COM_AKEEBABACKUP_REGEXFSFILTERS="RegEx Files and Directories Exclusion"

COM_AKEEBABACKUP_REMOTEFILES="Remotely stored files management"
COM_AKEEBABACKUP_REMOTEFILES_DELETE="Delete"
COM_AKEEBABACKUP_REMOTEFILES_ERR_CANTDELETE="Could not delete the remotely stored file. The error was: "
COM_AKEEBABACKUP_REMOTEFILES_ERR_CANTDOWNLOAD="Could not download file. The error was: "
COM_AKEEBABACKUP_REMOTEFILES_ERR_CANTOPENFILE="Can't open local file %s for writing; aborting the download process"
COM_AKEEBABACKUP_REMOTEFILES_ERR_DELETE_ALREADY="You have already deleted the remotely stored file. You need to transfer the file again for the remote file download and delete features to be available again."
COM_AKEEBABACKUP_REMOTEFILES_ERR_DOWNLOADEDTOFILE_ALREADY="You have already fetched back the remotely stored file to your site's server. Select the backup record and click on Delete Files to remove the file stored on your site's server to re-enable this button."
COM_AKEEBABACKUP_REMOTEFILES_ERR_INVALIDID="Invalid download ID specified"
COM_AKEEBABACKUP_REMOTEFILES_ERR_NOTSUPPORTED="Sorry, the remote storage engine you are using does not support downloading or deleting files stored remotely."
COM_AKEEBABACKUP_REMOTEFILES_ERR_NOTSUPPORTED_ALREADYONSERVER="You have already deleted the remotely stored files using Akeeba Backup."
COM_AKEEBABACKUP_REMOTEFILES_ERR_NOTSUPPORTED_HEADER="No remote file operations available"
COM_AKEEBABACKUP_REMOTEFILES_ERR_UNSUPPORTED="This functionality is currently not supported by the post-processing engine used by the current backup record."
COM_AKEEBABACKUP_REMOTEFILES_FETCH="Fetch back to server"
COM_AKEEBABACKUP_REMOTEFILES_INPROGRESS_HEADER="Operation in progress"
COM_AKEEBABACKUP_REMOTEFILES_INPROGRESS_LBL_PLEASEWAIT="Loading, please wait."
COM_AKEEBABACKUP_REMOTEFILES_INPROGRESS_LBL_UNDERWAY="The operation you requested is currently under way."
COM_AKEEBABACKUP_REMOTEFILES_INPROGRESS_LBL_WAITINGINFO="You will receive an update on its progress in as little as a few seconds or as much as three minutes."
COM_AKEEBABACKUP_REMOTEFILES_LBL_DOWNLOADEDSOFAR="Downloaded %u bytes of %u total bytes (%u %%)"
COM_AKEEBABACKUP_REMOTEFILES_LBL_DOWNLOADLOCALLY="Download to your desktop"
COM_AKEEBABACKUP_REMOTEFILES_LBL_JUSTFINISHED="Finished downloading your backup set from the remote storage back to the local server"
COM_AKEEBABACKUP_REMOTEFILES_LBL_JUSTFINISHEDELETING="Remotely stored files have been deleted successfully"
COM_AKEEBABACKUP_REMOTEFILES_PART="Part #%u"

COM_AKEEBABACKUP_RESTORE="Site Restoration"
COM_AKEEBABACKUP_RESTORE_LABEL_ARCHIVE_INFORMATION="Backup #%d will be restored"
COM_AKEEBABACKUP_RESTORE_LABEL_WARN_ABOUT_RESTORE="Restoring a backup will <em>replace</em> your site with the site snapshot contained in the backup archive. Any changes made to your site since the time of the backup will be <em>lost forever</em>. Please double check that you are restoring the correct backup archive."
COM_AKEEBABACKUP_RESTORE_ERROR_ARCHIVE_MISSING="The backup archive could not be located"
COM_AKEEBABACKUP_RESTORE_ERROR_CANT_WRITE="Could not write restoration.php. Please make sure the <code>administrator/components/com_akeebabackup</code> directory is writable."
COM_AKEEBABACKUP_RESTORE_ERROR_INVALID_RECORD="Invalid backup record"
COM_AKEEBABACKUP_RESTORE_ERROR_INVALID_TYPE="Invalid file type. The integrated restoration will only work with JPA and ZIP files."
COM_AKEEBABACKUP_RESTORE_ERROR_NO_LATEST="There is no backup taken with profile #%d or the backup archive is not present on your server. Please use the Manage Backup page to identify your backups, fetch them back to your server (if they are stored remotely) and restore them."
COM_AKEEBABACKUP_RESTORE_LABEL_BYTESEXTRACTED="Bytes extracted"
COM_AKEEBABACKUP_RESTORE_LABEL_BYTESREAD="Bytes read"
COM_AKEEBABACKUP_RESTORE_LABEL_DONOTCLOSE="Please <strong>DO NOT</strong> browse to another page, switch to another browser tab / window, or switch to <em>a different application</em> unless you see a completion or error message. Make sure your device does not go into sleep mode while the backup archive extraction is in progress."
COM_AKEEBABACKUP_RESTORE_LABEL_EXTRACTIONMETHOD="Files extraction method"
COM_AKEEBABACKUP_RESTORE_LABEL_EXTRACTIONMETHOD_DIRECT="Write directly to files"
COM_AKEEBABACKUP_RESTORE_LABEL_EXTRACTIONMETHOD_FTP="Use the FTP layer"
COM_AKEEBABACKUP_RESTORE_LABEL_EXTRACTIONMETHOD_HYBRID="Hybrid (write directly, use FTP layer only when necessary)"
COM_AKEEBABACKUP_RESTORE_LABEL_FAILED="The extraction has failed"
COM_AKEEBABACKUP_RESTORE_LABEL_FAILED_INFO="Extraction of the backup archive has failed.<br/>The last error message was:"
COM_AKEEBABACKUP_RESTORE_LABEL_FILESEXTRACTED="Files extracted"
COM_AKEEBABACKUP_RESTORE_LABEL_FINALIZE="Finalise restoration"
COM_AKEEBABACKUP_RESTORE_LABEL_FTPOPTIONS="FTP Layer Options"
COM_AKEEBABACKUP_RESTORE_LABEL_INPROGRESS="Archive extraction in progress"
COM_AKEEBABACKUP_RESTORE_LABEL_MAX_EXEC="Maximum execution time (seconds)"
COM_AKEEBABACKUP_RESTORE_LABEL_MAX_EXEC_TIP="Files will be extracted for at most this many seconds in each step. Increase to make extraction faster. Decrease to prevent server timeouts."
COM_AKEEBABACKUP_RESTORE_LABEL_MIN_EXEC="Minimum execution time (seconds)"
COM_AKEEBABACKUP_RESTORE_LABEL_MIN_EXEC_TIP="Each files extraction step will not return for this many seconds. Set higher than the maximum setting below to add “dead time” in each step, reducing resource usage."
COM_AKEEBABACKUP_RESTORE_LABEL_REMOTETIP="<strong>Tip</strong>: In order to restore to a remote server select the \"Use the FTP layer\" option and supply your remote server's FTP connection information in the FTP Layer Options below.<br/>Use the Hybrid option and give the current site's FTP connection information if the restoration fails with unwriteable files."
COM_AKEEBABACKUP_RESTORE_LABEL_RUNINSTALLER="Run the site restoration script"
COM_AKEEBABACKUP_RESTORE_LABEL_START="Start Restoration"
COM_AKEEBABACKUP_RESTORE_LABEL_SUCCESS="The extraction was completed successfully"
COM_AKEEBABACKUP_RESTORE_LABEL_SUCCESS_INFO2="You must now run the Akeeba Backup Restoration Script which was included in your backup archive at backup time. <em>Do not close this window!</em>. After the restoration is over, close the Akeeba Backup Restoration Script's window and click the new Finalise Restoration button below to remove the <code>installation</code> directory and begin using your restored site."
COM_AKEEBABACKUP_RESTORE_LABEL_SUCCESS_INFO2B="If, however, you are restoring to a remote site <em>do not</em> click either button. Instead, visit the restoration script's URL at <code>http://<var>www.yoursite.com</var>/installation/index.php</code>. After the restoration is over, click on \"Remove the installation folder\" link on the restoration script's final page or, if this fails, remove the <code>installation</code> directory from that site using your favourite FTP application."
COM_AKEEBABACKUP_RESTORE_LABEL_TIME_HEAD="Timing settings (advanced)"
COM_AKEEBABACKUP_RESTORE_LABEL_ZAPBEFORE="Delete everything before extraction"
COM_AKEEBABACKUP_RESTORE_LABEL_ZAPBEFORE_HELP="Tries to delete all existing files and folders under your site's root directory before extracting the backup archive. It DOES NOT take into account which files and folders exist in the backup archive or which files and folders are excluded during backup. Files and folders deleted by this feature CAN NOT be recovered. <strong>WARNING! THIS MAY DELETE FILES AND FOLDERS WHICH DO NOT BELONG TO YOUR SITE. THIS FEATURE IS ONLY MEANT FOR VERY EXPERIENCED USERS WHO UNDERSTAND THE RISKS. USE WITH EXTREME CAUTION. BY ENABLING THIS FEATURE YOU ASSUME ALL RESPONSIBILITY AND LIABILITY. FURTHERMORE YOU WAIVE ANY RIGHT TO REQUEST SUPPORT FROM AKEEBA LTD.</strong>"
COM_AKEEBABACKUP_RESTORE_LABEL_STEALTHMODE="Enable Stealth Mode while restoring"
COM_AKEEBABACKUP_RESTORE_LABEL_STEALTHMODE_HELP="Visitors to your site coming from a different IP address than yours will be temporarily redirected to <code>installation/offline.html</code>, a file telling them your site is currently under maintenance. Only works on servers which support <code>.htaccess</code> files. Please read the documentation for more information."

COM_AKEEBABACKUP_S3IMPORT="Import Archives from S3"
COM_AKEEBABACKUP_S3IMPORT_ERR_CANTOPEN="Can not open the temporary file we just created; your server has a problem we cannot work around"
COM_AKEEBABACKUP_S3IMPORT_ERR_CANTWRITE="Can not write to your output directory; please check the permissions"
COM_AKEEBABACKUP_S3IMPORT_ERR_NOTENOUGHINFO="Not enough information to connect to S3"
COM_AKEEBABACKUP_S3IMPORT_ERR_NOTFOUND="The file was not found in your S3 bucket"
COM_AKEEBABACKUP_S3IMPORT_LABEL_CHANGEBUCKET="Change bucket"
COM_AKEEBABACKUP_S3IMPORT_LABEL_CONNECT="Connect to S3"
COM_AKEEBABACKUP_S3IMPORT_LABEL_SELECTBUCKET="- Bucket -"
COM_AKEEBABACKUP_S3IMPORT_MSG_IMPORTCOMPLETE="The archive was successfully imported to your site"

COM_AKEEBABACKUP_S3_ACCESS_DESCRIPTION="How the API will access the bucket. If unsure use Virtual Hosting. Virtual Hosting is the recommended, supported method for Amazon S3 which uses a URL like https://BUCKET.ENDPOINT to access the bucket. Path Access is an unsupported, deprecated method which uses a URL like https://ENDPOINT/BUCKET to access the bucket. You should only use Path Access if a third party storage provider with an Amazon S3-compatible API asks you to do that."
COM_AKEEBABACKUP_S3_ACCESS_PATH="Path Access (legacy)"
COM_AKEEBABACKUP_S3_ACCESS_TITLE="Bucket access"
COM_AKEEBABACKUP_S3_ACCESS_VIRTUALHOST="Virtual Hosting (recommended)"
COM_AKEEBABACKUP_S3_REGION_AFSOUTH1="Africa (Cape Town)"
COM_AKEEBABACKUP_S3_REGION_APEAST1="Asia Pacific (Hong Kong)"
COM_AKEEBABACKUP_S3_REGION_APNORTHEAST1="Asia Pacific (Tokyo)"
COM_AKEEBABACKUP_S3_REGION_APNORTHEAST2="Asia Pacific (Seoul)"
COM_AKEEBABACKUP_S3_REGION_APNORTHEAST3="Asia Pacific (Osaka-Local)"
COM_AKEEBABACKUP_S3_REGION_APSOUTH1="Asia Pacific (Mumbai)"
COM_AKEEBABACKUP_S3_REGION_APSOUTHEAST1="Asia Pacific (Singapore)"
COM_AKEEBABACKUP_S3_REGION_APSOUTHEAST2="Asia Pacific (Sydney)"
COM_AKEEBABACKUP_S3_REGION_CACENTRAL1="Canada (Central)"
COM_AKEEBABACKUP_S3_REGION_CNNORTH1="China (Beijing)"
COM_AKEEBABACKUP_S3_REGION_CNNORTHWEST1="China (Ningxia)"
COM_AKEEBABACKUP_S3_REGION_DESCRIPTION="Choose the S3 region where your bucket is located in. Please consult http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region <strong>ATTENTION! Due to Amazon's API you MUST select the location of your bucket when using the v4 signature method. The v4 signature method is MANDATORY for all buckets created in any region which went online after January 2014 such as Frankfurt and Sao Paolo.</strong> This is an Amazon restriction, not an Akeeba Backup restriction. Thank you for your understanding."
COM_AKEEBABACKUP_S3_REGION_EUCENTRAL1="Europe (Frankfurt)"
COM_AKEEBABACKUP_S3_REGION_EUNORTH1="Europe (Stockholm)"
COM_AKEEBABACKUP_S3_REGION_EUSOUTH1="Europe (Milan)"
COM_AKEEBABACKUP_S3_REGION_EUWEST1="Europe (Ireland)"
COM_AKEEBABACKUP_S3_REGION_EUWEST2="Europe (London)"
COM_AKEEBABACKUP_S3_REGION_EUWEST3="Europe (Paris)"
COM_AKEEBABACKUP_S3_REGION_MESOUTH1="Middle East (Bahrain)"
COM_AKEEBABACKUP_S3_REGION_NONE="None (ATTENTION! ONLY USE WITH THE v2 SIGNATURE METHOD)"
COM_AKEEBABACKUP_S3_REGION_CUSTOM_OR_NONE="Custom / None"
COM_AKEEBABACKUP_S3_REGION_SAEAST1="South America (São Paulo)"
COM_AKEEBABACKUP_S3_REGION_TITLE="Amazon S3 Region"
COM_AKEEBABACKUP_S3_REGION_USEAST1="US East (N. Virginia)"
COM_AKEEBABACKUP_S3_REGION_USEAST2="US East (Ohio)"
COM_AKEEBABACKUP_S3_REGION_USWEST1="US West (N. California)"
COM_AKEEBABACKUP_S3_REGION_USWEST2="US West (Oregon)"
COM_AKEEBABACKUP_S3_RRS_DEEP_ARCHIVE="Deep Archive"
COM_AKEEBABACKUP_S3_RRS_GLACIER="Glacier"
COM_AKEEBABACKUP_S3_RRS_INTELLIGENT_TIERING="Intelligent Tiering"
COM_AKEEBABACKUP_S3_RRS_ONEZONE_IA="One Zone - Infrequent Access"
COM_AKEEBABACKUP_S3_RRS_RRS="Reduced Redundancy Storage"
COM_AKEEBABACKUP_S3_RRS_STANDARD="Standard storage"
COM_AKEEBABACKUP_S3_RRS_STANDARD_IA="Standard - Infrequent Access"
COM_AKEEBABACKUP_S3_SIGNATURE_DESCRIPTION="Specify the request signature method. Use v4 if unsure. You may have to use v2 with third party storage services (i.e. when you specify a custom endpoint)."
COM_AKEEBABACKUP_S3_SIGNATURE_TITLE="Signature method"
COM_AKEEBABACKUP_S3_SIGNATURE_V2="v2 (legacy mode, third party storage providers)"
COM_AKEEBABACKUP_S3_SIGNATURE_V4="v4 (preferred for Amazon S3)"
COM_AKEEBABACKUP_S3_CUSTOM_REGION_TITLE="Custom Amazon S3 Region"
COM_AKEEBABACKUP_S3_CUSTOM_REGION_DESCRIPTION="Set the option above to “Custom / None” and enter here the name of the region you want to use, e.g. <code>us-east-1</code> for US East (N. Virginia).<br/>This is meant to be used with new S3 regions we have not already listed above or with third party S3-compatible services which use the S3 v4 API and their own, custom, service-specific region names."

COM_AKEEBABACKUP_SCHEDULE="Schedule Automatic Backups"

COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER="Joomla Scheduled Tasks"
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_INFO="You can create backup tasks using Joomla's Scheduled Tasks feature. Please read the documentation first to understand the compromises and potential problems depending on the way you choose to trigger Joomla's Scheduled Tasks."
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_BUTTON="Manage your Scheduled Tasks"
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_ONLYJ41_HEAD="Scheduled Tasks are only available on Joomla 4.1 and later"
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_ONLYJ41_BODY="Joomla introduced the Scheduled Tasks feature in Joomla! version 4.1.0. Please update your site to the latest Joomla version to get access to Scheduled Tasks."
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_PLUGIN_DISABLED_HEAD="The “Task – Akeeba Backup” plugin is disabled."
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_PLUGIN_DISABLED_BODY="The “Task – Akeeba Backup” plugin must be enabled forJoomla's Scheduled Tasks to know how to run backups with Akeeba Backup. Please go to System, Manage, Plugins and enable the plugin. Alternatively click the following button to edit the plugin directly."
COM_AKEEBABACKUP_SCHEDULE_LBL_JOOMLASCHEDULER_PLUGIN_DISABLED_BUTTON="Edit the plugin"

COM_AKEEBABACKUP_SCHEDULE_LBL_ALTCLICRON="Alternative Command-Line CRON jobs"
COM_AKEEBABACKUP_SCHEDULE_LBL_ALTCLICRON_INFO="This method is recommended only if the regular Command-Line CRON job does not complete. Even though it is running through Joomla's console application, it will go through Joomla's web application — using Akeeba Backup's front-end backup method — which makes it slower than the native CLI method."
COM_AKEEBABACKUP_SCHEDULE_LBL_CHECKHEADERINFO="<p>When a scheduled backup fails it typically means that PHP stopped working before the backup is complete. Therefore Akeeba Backup cannot notify you of the backup failure in the same way it notifies you for the backup finishing successfully or with warnings.</p><p>To solve that problem you can schedule the latest backup checks to run after the expected end of your backup run. Not sure when would that be? Ideally, it should be the length of the last successful backup recorded in the Manage Backups page plus half an hour.</p><p>You can schedule this check with many different methods, just like the backup itself. Below you will find more information about each scheduling method available for backup checks. If you are unsure which one to use we recommend that you use the same scheduling method as your backups.</p>"
COM_AKEEBABACKUP_SCHEDULE_LBL_CHECK_BACKUPS="Check Backup Status"
COM_AKEEBABACKUP_SCHEDULE_LBL_CLICRON="Command-Line CRON jobs (recommended)"
COM_AKEEBABACKUP_SCHEDULE_LBL_CLICRON_INFO="This is the recommended method for all servers supporting command-line CRON jobs. This method uses Joomla's console (CLI) application — instead of Joomla!'s web application — achieving maximum backup speed."
COM_AKEEBABACKUP_SCHEDULE_LBL_CLIGENERICIMPROTANTINFO="Important"
COM_AKEEBABACKUP_SCHEDULE_LBL_CLIGENERICINFO="Remember to substitute <em>%s</em> with the real path to your host's PHP <strong>CLI (Command Line Interface)</strong> executable. Do remember that you must use the PHP CLI executable; the PHP CGI (Common Gateway Interface) executable will <em>not</em> work with Joomla's CLI application. If unsure what this means, please consult your host. They are the only people who can provide this information."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP="Front-end Backup Feature"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_INFO="This method uses a public URL and a secret key to trigger a backup of your site. The backup progresses by means of HTTP redirects. Please note that most hosts' URL-based ‘CRON’ jobs, as well as most third-party URL-based CRON services, do not support HTTP redirects. If the examples with wget and curl below don't work for you, please use the front-end backup URL with the very cheap webcron.org third party service."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_MANYMETHODS="The front-end backup feature can be used with a great variety of methods. Click the tabs below to see all each method's description. Remember that all of them are explained in detail in our documentation."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_TAB_CURL="cURL"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_TAB_SCRIPT="PHP Script"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_TAB_URL="URL"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_TAB_WEBCRON="WebCron.org"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDBACKUP_TAB_WGET="WGet"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTENDCHECK="Front-end Backup Check Feature"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_CURL="CRON scheduling using curl (macOS, Linux, some hosts):"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_CUSTOMSCRIPT="Custom PHP script to run the front-end backup:"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_DISABLED="The front-end backup feature of Akeeba Backup is not enabled. You cannot use this scheduling method unless you enable it. Please go to Akeeba Backup's Control Panel, click on the Options button in the toolbar and enable the front-end backup feature. Do not forget to also specify a secret word of your liking."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_RAWURL="URL for use with your own scripts and third party services:"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_SECRET="The front-end backup feature's secret key is empty. You cannot use this scheduling method unless you create a secret key. Please go to Akeeba Backup's Control Panel, click on the Options button in the toolbar and enter a secret key of your liking."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON="Configuration of a backup job with WebCron.org:"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_ALERTS="Alerts"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_ALERTS_INFO="If you have already set up alert methods in webcron.org's interface, we recommend choosing an alert method here and not checking the 'Only on error' so that you always get a notification when the backup CRON job runs."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_EXECUTIONTIME="Execution time"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_EXECUTIONTIME_INFO="That's the grid below the other options. Select when and how often you want your CRON job to run."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_INFO="Log in to webcron.org. In the CRON area, click on the New Cron button. Below you'll find what you have to enter at webcron.org's interface."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_LOGIN="Login"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_LOGINPASSWORD_INFO="Leave this blank"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_NAME="Name of cronjob"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_NAME_INFO="Anything you like, e.g. <em>Backup of my site</em>"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_PASSWORD="Password"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_THENCLICKSUBMIT="Finally, click on the Submit button to finish setting up your CRON job."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_TIMEOUT="Timeout"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_TIMEOUT_INFO="180sec; if the backup doesn't complete, increase it. Most sites will work with a setting of 180 or 600 here. If you have a very big site which takes more than 5 minutes to back itself up, you might consider using Akeeba Backup Professional and the native CLI CRON job instead, as it's much more cost-effective."
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WEBCRON_URL="Url you want to execute"
COM_AKEEBABACKUP_SCHEDULE_LBL_FRONTEND_WGET="CRON scheduling using wget (most hosts, most Linux distributions):"
COM_AKEEBABACKUP_SCHEDULE_LBL_GENERICREADDOC="Read the documentation"
COM_AKEEBABACKUP_SCHEDULE_LBL_GENERICUSECLI="Use the following command in your host's CRON interface:"
COM_AKEEBABACKUP_SCHEDULE_LBL_HEADERINFO="Akeeba Backup offers several scheduling methods. You will find more information about each scheduling method below. Please do read the documentation of each scheduling method. It will answer a lot of your questions and will help you schedule your backups more easily."
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPIBACKUP="Remote Backup (JSON API) Feature"
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPIBACKUP_INFO="You can use this method to take backups of your site remotely using either our software that supports such a feature (e.g. Akeeba Remote CLI and Akeeba UNiTE) or third party services such as BackupMOnkey, Watchful etc. If you are using a third party service which claims to use Akeeba Backup to take backups of your site this is the backup method you will be using for your site."
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPI_DISABLED="Please go to Akeeba Backup, click on Options, then the Frontend tab. Set “Enable JSON API (remote backup)” to Yes to enable this feature."
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPI_DISCLAIMER="Akeeba Ltd does not provide support for JSON API connectivity issues with third party services and software which use the Akeeba Backup JSON API. If you are unsure if you have a connectivity or a backup issue please contact the developers of the third party service or software first. If they tell you it's a backup issue we can offer support for it, subject to the conditions outlined in our Terms of Service. Please bear in mind that this version of Akeeba Backup only supports the Akeeba Backup JSON API version 2 (API level 400 and later) and may not work with older software and services which are still implementing the legacy Akeeba Backup JSON API version 1 which was available between 2011 and 2021."
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPI_ENDPOINT="Endpoint URL"
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPI_INTRO="You may have to provide some or all of the following information to the software or service which will be taking backups of your site remotely."
COM_AKEEBABACKUP_SCHEDULE_LBL_JSONAPI_SECRET="Secret Key"
COM_AKEEBABACKUP_SCHEDULE_LBL_LEGACYAPI_DISABLED="Please go to Akeeba Backup, click on Options, then the Frontend tab. Set “Enable Legacy Front-end Backup API (remote CRON jobs)” to Yes to enable this feature."
COM_AKEEBABACKUP_SCHEDULE_LBL_RUN_BACKUPS="Run Backups"
COM_AKEEBABACKUP_SCHEDULE_LBL_UPGRADENOW="Upgrade Now"
COM_AKEEBABACKUP_SCHEDULE_LBL_UPGRADETOPRO="This feature is only available in Akeeba Backup Professional"
COM_AKEEBABACKUP_SCHEDULE_LBL_CONSOLEPLUGINDISALBED_HEAD="The <em>Console – Akeeba Backup</em> plugin is disabled."
COM_AKEEBABACKUP_SCHEDULE_LBL_CONSOLEPLUGINDISALBED_BODY="Please go to System, Manage, Plugins and enable the “Console – Akeeba Backup”. It is necessary for this feature to work."

COM_AKEEBABACKUP_TITLE_ALICES="Troubleshooter - ALICE"

COM_AKEEBABACKUP_TRANSFER="Site Transfer Wizard"
COM_AKEEBABACKUP_TRANSFER_BTN_FTP_PROCEED="Proceed with restoration"
COM_AKEEBABACKUP_TRANSFER_BTN_OPEN_KICKSTART="Run Kickstart"
COM_AKEEBABACKUP_TRANSFER_BTN_RESET="Reset"
COM_AKEEBABACKUP_TRANSFER_DESC="Transfers the archive by running the \"%s\" post-processing engine against the archive."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTACCESSTESTFILE="Akeeba Backup cannot verify that the connection information you entered corresponds to the site URL you have entered. If you are trying to restore inside a subdirectory of an existing site this means that the main site is blocking access to the subdirectory; please contact your site administrator. In any other case you have entered the wrong connection information, most likely a wrong directory. Please contact your host and ask them for the correct connection information, <em>including the directory</em>, which corresponds to your the URL you have entered in this wizard. Then come back here, enter the correct information and continue with the restoration."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTREADLOCALFILE="Akeeba Backup cannot read from the local backup file <code>%s</code>. This wizard has failed. Please take a new backup and retry. Do note that files have been left behind on your new server; you may want to remove them manually."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTRUNKICKSTART="Akeeba Backup cannot run Akeeba Kickstart on your new site. If you are trying to restore inside a subdirectory of an existing site this means that the main site is blocking access to the subdirectory; please contact your site administrator. In any other case you need to contact your host and verify that your default PHP version matches Kickstart's minimum requirements."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTUPLOADARCHIVE="Akeeba Backup cannot upload the backup file <code>%s</code>. It's possible that your new site's server has ran out of disk space or a server protection is blocking the transmission of the data. Please try transferring your site by selecting the Manually transfer option. Do note that files have been left behind on your new server; you may want to remove them manually."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTUPLOADKICKSTART="Akeeba Backup cannot upload Akeeba Kickstart to your new site's root. Please check that you have entered the correct connection information and that it's possible for the FTP/SFTP user to write files into the directory you selected. If you already have kickstart.php and kickstart.transfer.php on the remote site please remove them before retrying transferring your site."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTUPLOADTEMP="Akeeba Backup cannot upload a chunk of your backup archive from the local file <code>%s</code> to the remote file <code>%s</code>. Please check that your remote server allows uploading files and there is enough disk space on it for your backup archive file(s)."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTUPLOADTESTFILE="Akeeba Backup cannot upload a test file called <code>%s</code> to your new site's root. Please check that you have entered the correct connection information and that it's possible for the FTP/SFTP user to write files into the directory you selected."
COM_AKEEBABACKUP_TRANSFER_ERR_CANNOTWRITEREMOTEFILES="Unfortunately, Akeeba Backup has determined it cannot write directly to files on your remote server. This wizard cannot proceed. You will have to use the \"Manually\" transfer method."
COM_AKEEBABACKUP_TRANSFER_ERR_CANTCREATETEMPCHUNK="Cannot create a temporary file on this server. Please check that your temporary directory is correctly set up and writeable by the user the web server is currently runnning under."
COM_AKEEBABACKUP_TRANSFER_ERR_COMPLETEBACKUP="No such backup is found. Click the Backup Now button to take a new backup now."
COM_AKEEBABACKUP_TRANSFER_ERR_DNS="The domain name of the URL you have entered (%s) cannot be resolved from the server where Akeeba Backup is running on. If you have recently registered or transffered the domain name please allow more time until DNS servers are updated (typically 6 to 48 hours). Otherwise please check the DNS settings of your domain name."
COM_AKEEBABACKUP_TRANSFER_ERR_ERRORFROMREMOTE="Akeeba Backup has received an error from the remote server while trying to upload the backup archive. The error was: %s"
COM_AKEEBABACKUP_TRANSFER_ERR_EXISTINGSITE="Another site already exists in that location. Please remove the existing site before transfering a new site there. Trying to overwrite an existing site will most likely result in a broken site you won't be able to fix."
COM_AKEEBABACKUP_TRANSFER_ERR_HTACCESS="A <code>%s</code> file was found in your new site's root. This file can interfere with the site transfer process. Please remove it before proceeding with the site transfer. Please note that the file may be <em>hidden</em>. If you don't see this file in your hosting control panel file browser or FTP client software please ask your host for more information on removing this file."
COM_AKEEBABACKUP_TRANSFER_ERR_INVALIDID="Internal error: the backup ID to upload is invalid or missing."
COM_AKEEBABACKUP_TRANSFER_ERR_NEWURL_BTN="Check"
COM_AKEEBABACKUP_TRANSFER_ERR_NEWURL_BTN_IGNOREERROR="I want to ignore this warning and proceed <strong>at my own risk</strong>"
COM_AKEEBABACKUP_TRANSFER_ERR_NEWURL_INVALID="The URL you entered is invalid."
COM_AKEEBABACKUP_TRANSFER_ERR_NEWURL_NOTEXISTS="Your server cannot access the URL you have entered. Please check that you typed it correctly. Also note that newly assigned or transferred domain names may take <strong>up to 48 hours</strong> before they are visible to every server and computer connected to the Internet."
COM_AKEEBABACKUP_TRANSFER_ERR_NEWURL_SAME="The URL you entered is the same as the one you are restoring from. This is not supported by this wizard. For backup restoration without using the wizard please consult our video tutorial following the link below."
COM_AKEEBABACKUP_TRANSFER_ERR_NOTENOUGHSPACE="The site transfer cannot proceed. You need approximately %s of free space but your server reports that only %s is currently available. Please make more space on your server."
COM_AKEEBABACKUP_TRANSFER_ERR_OVERRIDE="Ignore detected errors and transfer the site anyway"
COM_AKEEBABACKUP_TRANSFER_ERR_SAMESITE="You have entered the connection information to the site you are transfering from. <strong>Your mistake would have deleted your own site</strong>. You need to enter the FTP/SFTP connection information to the site you are transferring <strong>to</strong> (new site or new server). Please fix the information above and retry."
COM_AKEEBABACKUP_TRANSFER_ERR_SPACE="You only have <span></span> of free space. You need more free space to transfer your site. Please contact your host."
COM_AKEEBABACKUP_TRANSFER_ERR_WRONGSSL="Your site has an invalid or self-signed SSL certificate. For security reasons the site transfer cannot proceed. Please click Reset to restart the site transfer and use a URL without <code>https://</code>. This is necessary when you are trying to transfer your site before transferring your domain name to the new host. Alternatively, please contact your host for obtaining a valid SSL certificate. Even a free one issued through the no cost Let's Encrypt certification authority will do."
COM_AKEEBABACKUP_TRANSFER_FORCE_BODY="You are running Site Transfer Wizard in Forced Mode. This means that some sanity checks which normally run before the site transfer will not be executed. As a result the transfer may overwrite an existing site, end up in a different URL than the one you expected or simply fail. <strong>This is a power user feature. Please do not continue if you don't feel comfortable with it.</strong>"
COM_AKEEBABACKUP_TRANSFER_FORCE_HEADER="Forced Mode activated"
COM_AKEEBABACKUP_TRANSFER_HEAD_MANUALTRANSFER="Manual transfer"
COM_AKEEBABACKUP_TRANSFER_HEAD_PREREQUISITES="Prerequisites"
COM_AKEEBABACKUP_TRANSFER_HEAD_REMOTECONNECTION="Connection to New Site"
COM_AKEEBABACKUP_TRANSFER_HEAD_UPLOAD="Upload and restore"
COM_AKEEBABACKUP_TRANSFER_LBL_CHUNKSIZE="Chunk size"
COM_AKEEBABACKUP_TRANSFER_LBL_CHUNKSIZE_INFO="The backup archive files are transferred in small chunks to the remote server. This determines the size of these chunks. Too small sizes may cause the remote server to block you, mistaking you as an abuser, causing an upload error to be displayed. Too large sizes may result in a timeout error on either the source or the remote server, causing an AJAX Error to be displayed. Typically, values between 5M to 20M work best."
COM_AKEEBABACKUP_TRANSFER_LBL_COMPLETEBACKUP="A complete, full site backup"
COM_AKEEBABACKUP_TRANSFER_LBL_COMPLETEBACKUP_INFO="Backup found; taken on %s"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_DIRECTORY="FTP/SFTP Directory"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_HOST="Host name"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_PASSIVE="Passive mode"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_PASSWORD="Password"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_PORT="Port"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_PRIVATEKEY="SFTP Private Key file"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_PUBKEY="SFTP Public Key file"
COM_AKEEBABACKUP_TRANSFER_LBL_FTP_USERNAME="Username"
COM_AKEEBABACKUP_TRANSFER_LBL_MANUALTRANSFER_INFO="Follow the instructions in the video to transfer your site manually. Information about the backup archive can be found below the video link (scroll down)."
COM_AKEEBABACKUP_TRANSFER_LBL_MANUALTRANSFER_LINK="Watch the video tutorial"
COM_AKEEBABACKUP_TRANSFER_LBL_MANUALTRANSFER_MULTIPART="You must transfer <strong>all</strong> %u files:"
COM_AKEEBABACKUP_TRANSFER_LBL_NEWURL="The URL to your new site"
COM_AKEEBABACKUP_TRANSFER_LBL_NEWURL_TIP="Enter the URL to the site you are restoring to"
COM_AKEEBABACKUP_TRANSFER_LBL_OPEN_KICKSTART_INFO="Kickstart will let you extract the backup archive and begin restoration on the remote server."
COM_AKEEBABACKUP_TRANSFER_LBL_SPACE="Approximately %s of free space on your new site"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD="File transfer method"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_FTP="FTP, native PHP functions"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_FTPCURL="FTP, using cURL"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_FTPS="FTPS, native PHP functions"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_FTPSCURL="FTPS, using cURL"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_MANUALLY="Manually"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_SFTP="SFTP, native PHP SSH2 extension"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMETHOD_SFTPCURL="SFTP, using cURL"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMODE="Archive transfer mode"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMODE_CHUNKED="Over FTP / SFTP"
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMODE_INFO="The backup archive files are transferred in small chunks to the remote server and then assembled into whole files there. This option controls how these small chunks are transferred."
COM_AKEEBABACKUP_TRANSFER_LBL_TRANSFERMODE_POST="Over HTTP / HTTPS"
COM_AKEEBABACKUP_TRANSFER_LBL_UPLOAD_BACKUP="Uploading the backup archive"
COM_AKEEBABACKUP_TRANSFER_LBL_UPLOAD_KICKSTART="Uploading Kickstart"
COM_AKEEBABACKUP_TRANSFER_LBL_VALIDATING="Validating…"
COM_AKEEBABACKUP_TRANSFER_MSG_DONE="Uploading is complete!"
COM_AKEEBABACKUP_TRANSFER_MSG_FAILED="Uploading the backup archive failed."
COM_AKEEBABACKUP_TRANSFER_MSG_START="Preparing to upload your archive. This will take some time. Please wait."
COM_AKEEBABACKUP_TRANSFER_MSG_UPLOADINGFRAG="Continuing the upload of archive part %s of %s. Currently processing chunk %s. Please wait."
COM_AKEEBABACKUP_TRANSFER_MSG_UPLOADINGPART="Uploading archive part %s of %s. Please wait."
COM_AKEEBABACKUP_TRANSFER_TITLE="Transfer Archive"
COM_AKEEBABACKUP_TRANSFER_WARN_FIREWALLED_BODY="Some of the transfer methods listed above and marked with &#128274; are blocked by a firewall on your server. If you use them this wizard will most likely fail. Please contact your host and ask them to disable the firewall or add firewall exceptions before transferring your site. Alternatively, please select Manually above, click on Proceed with restoration and follow the instructions for a manual site transfer."
COM_AKEEBABACKUP_TRANSFER_WARN_FIREWALLED_HEAD="Server firewall blocking file transfers - THIS WIZARD MAY FAIL"

COM_AKEEBABACKUP_FILTER_SELECT_FROZEN="– Frozen –"
COM_AKEEBABACKUP_FILTER_SELECT_PROFILEID="– Backup Profile –"

COM_AKEEBABACKUP_CLI_ERR_CANNOT_LOAD_BACKUP_ENGINGE="Cannot load the Akeeba Backup engine."

COM_AKEEBABACKUP_CLI_ERR_CANNOT_GENERATE_YAML="Cannot generate YAML"
COM_AKEEBABACKUP_CLI_ERR_YAML_EXTENSION_NOT_FOUND="Your PHP installation does not have the PHP YAML extension installed or enabled."
COM_AKEEBABACKUP_CLI_ERR_UNSET_TIME_LIMITS="Could not unset time limit restrictions; you may get a timeout error."
COM_AKEEBABACKUP_CLI_ERR_NO_LIVE_SITE="This script could not detect your live site's URL. Please visit Akeeba Backup's Control Panel page at least once before running this script, so that this information can be stored for use by this script."
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_DISABLED="Your Akeeba Backup installation's front-end backup feature is currently disabled. Please log in to your site's back-end as a Super User, go to Akeeba Backup's Control Panel, click on the Options icon in the top right corner and enable the front-end backup feature. Do not forget to also set a Secret Word!"
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_NOSECRET="You have enabled the front-end backup feature, but you forgot to set a secret word. Without a valid secret word this script can not continue. Please log in to your site's back-end as a Super Administrator, go to Akeeba Backup's Control Panel, click on the Options icon in the top right corner set a Secret Word."
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_NOMETHOD="Could not find any supported method for running the front-end backup feature of Akeeba Backup. Please check with your host that at least one of the following features are supported in your PHP configuration:"
COM_AKEEBABACKUP_CLI_ERR_FECHECK_NOMETHOD="Could not find any supported method for running the front-end failed backup backup feature of Akeeba Backup. Please check with your host that at least one of the following features are supported in your PHP configuration:"
COM_AKEEBABACKUP_CLI_ERR_FEBACKUPORCHECK_METHOD_CURL="1. The cURL extension"
COM_AKEEBABACKUP_CLI_ERR_FEBACKUPORCHECK_METHOD_FOPEN="2. The fopen() URL wrappers, i.e. allow_url_fopen is enabled"
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_METHOD_NOMETHOD="If neither method is available you will not be able to backup your site using this CLI command."
COM_AKEEBABACKUP_CLI_ERR_FECHECK_METHOD_NOMETHOD="If neither method is available you will not be able to check your site for failed backups using this CLI command."
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_HTTP_ERROR="Your backup attempt failed with HTTP error code %d (%s). Please check the backup log and your server's error log for more information."
COM_AKEEBABACKUP_CLI_ERR_FECHECK_HTTP_ERROR="Your failed backup check attempt failed with HTTP error code %d (%s). Please check your server's error log for more information."
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_NO_MESSAGE_FROM_SERVER="Your backup attempt has timed out, or a fatal PHP error has occurred. Please check the backup log and your server's error log for more information."
COM_AKEEBABACKUP_CLI_ERR_FECHECK_NO_MESSAGE_FROM_SERVER="Your attempt to check for failed backups has timed out, or a fatal PHP error has occurred."
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_ERROR_RECEIVED="A backup error has occurred. The server's response was:"
COM_AKEEBABACKUP_CLI_ERR_FECHECK_ERROR_RECEIVED="A failed backups check error has occurred. The server's response was:"
COM_AKEEBABACKUP_CLI_ERR_FEBACKUP_ERROR403_RECEIVED="The server denied the connection. Please make sure that the front-end backup feature is enabled and a valid secret word is in place."
COM_AKEEBABACKUP_CLI_ERR_SERVER_RESPONSE="Server response:"
COM_AKEEBABACKUP_CLI_ERR_CORRUPT_RESPONSE="We could not understand the server's response. Most likely a backup error has occurred. The server's response was:"
COM_AKEEBABACKUP_CLI_ERR_FECHECKS_CORRUPT_RESPONSE="We could not understand the server's response. Most likely a failed backups check error has occurred. The server's response was:"
COM_AKEEBABACKUP_CLI_ERR_CORRUPT_RESPONSE_INFO="If you do not see “200 OK” at the end of this output, the backup has failed."
COM_AKEEBABACKUP_CLI_ERR_FECHECKS_CORRUPT_RESPONSE_INFO="If you do not see “200 OK” at the end of this output, the failed backups check has failed."

COM_AKEEBABACKUP_CLI_CHECK_ALT_COMMAND_HELP="<info>%command.name%</info> will check for failed backups attempts with Akeeba Backup, using its front-end feature.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_CHECK_ALT_COMMAND_DESC="Check for failed Akeeba Backup backups with its front-end feature"

COM_AKEEBABACKUP_CLI_BACKUP_ALT_COMMAND_HELP="<info>%command.name%</info> will take a backup with Akeeba Backup, using its front-end backup feature.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_ALT_COMMAND_DESC="Take a backup with Akeeba Backup's frontend backup feature"
COM_AKEEBABACKUP_CLI_BACKUP_ALT_OPT_PROFILE="Profile number"
COM_AKEEBABACKUP_CLI_HEAD_BACKUP_ALTERNATE="Taking a backup with Akeeba Backup's frontend backup feature"

COM_AKEEBABACKUP_CLI_HEAD_CHECK_ALTERNATE="Checking for failed backup attempts made with Akeeba Backup using the front-end feature"

COM_AKEEBABACKUP_CLI_LBL_UNSET_TIME_LIMITS="Unsetting time limit restrictions"
COM_AKEEBABACKUP_CLI_LBL_START_BACKUP_WITH_PROFILE="Starting a backup with backup profile #%d"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_BEGINNING_BACKUP="[%s] Beginning backing up"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_BEGINNING_CHECK="[%s] Starting the check for failed backups"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_RECEIVED_HTTP="[%s] Received HTTP %d"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_NO_MESSAGE="[%s] No message received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_PROGRESS_RECEIVED="[%s] Backup progress signal received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_FINALISATION_RECEIVED="[%s] Backup finalisation message received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_CHECKS_FINALISATION_RECEIVED="[%s] Checks finalization message received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_ERROR500_RECEIVED="[%s] Error signal received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_ERROR403_RECEIVED="[%s] Connection denied (403) message received"
COM_AKEEBABACKUP_CLI_LBL_CONSOLELOG_CORRUPT="[%s] Could not parse the server response."

COM_AKEEBABACKUP_CLI_LBL_FEBACKUP_FINISH_HEAD="Your backup has finished successfully."
COM_AKEEBABACKUP_CLI_LBL_FEBACKUP_FINISH_DETAILS="Please review your backup log file for any warning messages. If you see any such messages, please make sure that your backup is working properly by trying to restore it on a local server."

COM_AKEEBABACKUP_CLI_LBL_FECHECK_FINISH_HEAD="Checks are finished successfully."

COM_AKEEBABACKUP_CLI_HEAD_CHECK="Checking for failed backup attempts made with Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_CHECK_HELP="<info>%command.name%</info> will check for failed backup attempts made with Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_CHECK_DESC="Check for failed Akeeba Backup backup attempts"

COM_AKEEBABACKUP_CLI_HEAD_BACKUP_DELETE="Deleting Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_LBL_BACKUP_DELETE_FILES="The files of backup record #%d have been deleted."
COM_AKEEBABACKUP_CLI_LBL_BACKUP_DELETE="The backup record #%d has been deleted."
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DELETE_FILES="Cannot delete the files of backup record #%d: %s"
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DELETE="Cannot delete backup record #%d: %s"
COM_AKEEBABACKUP_CLI_BACKUP_DELETE_HELP="<info>%command.name%</info> will delete a backup record known to Akeeba Backup, or just its files\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_DELETE_DESC="Deletes a backup record known to Akeeba Backup, or just its files"
COM_AKEEBABACKUP_CLI_BACKUP_DELETE_OPT_ID="The id of the backup record to delete"
COM_AKEEBABACKUP_CLI_BACKUP_DELETE_OPT_ONLY_FILES="Only delete the backup files stored on the site's server, not the record itself."

COM_AKEEBABACKUP_CLI_HEAD_BACKUP_DOWNLOAD="Retrieving part #%d of Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_NO_FILES="Backup record '%s' does not have any files available for download. Have you already deleted them?"
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_NO_FILES_MAYBE_REMOTE="Backup record '%s' does not have any files available for download on the server. If they are stored remotely you may need to use the fetch command first."
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_PART_OUT_OF_RANGE="There is no part '%s' of backup record '%s'."
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_PART_FILE_MISSING="Can not find part '%s' of backup record '%s' on the server."
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_PART_FILE_UNREADABLE="Cannot open '%s' for reading. Check the permissions / ACLs of the file."
COM_AKEEBABACKUP_CLI_ERR_BACKUP_DOWNLOAD_PART_FILE_UNWRITEABLE="Cannot open '%s' for writing. Check whether the folder exists and the permissions / ACLs of both the enclosing folder and the file."
COM_AKEEBABACKUP_CLI_LBL_BACKUP_DOWNLOAD_DONE="Downloaded part %d of backup record #%d into file %s"
COM_AKEEBABACKUP_CLI_BACKUP_DOWNLOAD_HELP="<info>%command.name%</info> will output or write a file with a backup archive part of a backup record known to Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_DOWNLOAD_DESC="Returns a backup archive part for a backup record known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_DOWNLOAD_OPT_ID="The id of the backup record to retrieve archives for"
COM_AKEEBABACKUP_CLI_BACKUP_DOWNLOAD_OPT_PART="The part number of the backup archive to retrieve"
COM_AKEEBABACKUP_CLI_BACKUP_DOWNLOAD_OPT_FILE="File path to write to. Will output to STDOUT if not defined."

COM_AKEEBABACKUP_CLI_BACKUP_FETCH_HEAD="Retrieving the remotely stored files for Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_SECTION_DOWNLOADING="Downloading backup archive for backup #%d"
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_LBL_PART_FRAG="Part file: %d, file fragment: %d"
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_LBL_FINISHED="Retrieving files of backup record '%s' has finished."
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_ERR_FAILED="Retrieving files of backup record '%s' failed."
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_HELP="<info>%command.name%</info> will download the backup archives of a backup known to Akeeba backup from the remote storage back to the server.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_DESC="Download a backup from the remote storage back to the server"
COM_AKEEBABACKUP_CLI_BACKUP_FETCH_OPT_ID="The id of the backup record to retrieve"

COM_AKEEBABACKUP_CLI_BACKUP_INFO_HEAD="Information for Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_BACKUP_INFO_HELP="<info>%command.name%</info> will list a backup record known to Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_INFO_DESC="Lists a backup record known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_INFO_OPT_ID="The id of the backup record to list"
COM_AKEEBABACKUP_CLI_BACKUP_INFO_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_BACKUP_LIST_HEAD="List of Akeeba Backup records matching your criteria"
COM_AKEEBABACKUP_CLI_BACKUP_LIST_HELP="<info>%command.name%</info> will list backup records known to Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_LIST_DESC="Lists backup records known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_FROM="How many backup records to skip before starting the output."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_LIMIT="Maximum number of backup records to display."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_DESCRIPTION="Listed backup records must match this (partial) description."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_AFTER="List backup records taken after this date."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_BEFORE="List backup records taken before this date."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_ORIGIN="List backups from this origin only: backend, frontend, json, cli."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_PROFILE="List backups taken with this profile. Give the numeric profile ID."
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_SORT_BY="Sort the output by the given column: id, description, profile_id, backupstart"
COM_AKEEBABACKUP_CLI_BACKUP_LIST_OPT_SORT_ORDER="Sort order: asc, desc."

COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_HEAD="Modifying Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_HELP="<info>%command.name%</info> will modify a backup record known to Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_DESC="Modifies a backup record known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_ERR_DESC_AND_COMMENT_REQUIRED="You must specify one or both of --description and --comment"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_ERR_CANNOT_MODIFY="Cannot modify backup record #%d"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_LBL_MODIFIED="Backup record #%d has been modified."
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_OPT_ID="The id of the backup record to modify"
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_OPT_DESCRIPTION="Change the short description to this value."
COM_AKEEBABACKUP_CLI_BACKUP_MODIFY_OPT_COMMENT="Change the backup comment to this value (accepts HTML)."

COM_AKEEBABACKUP_CLI_BACKUP_TAKE_HEAD="Taking a backup with Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_SECTION_START="Starting backup using profile #%s."
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_LASTTICK="Last Tick   : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_DOMAIN="Domain      : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_STEP="Step        : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_SUBSTEP="Substep     : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_PROGRESS="Progress    : %1.2f%%"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_CONSOLELOG_MEMORY="Memory used : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_LBL_PEAKMEM="Peak memory used : %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_LBL_TOTALTILE="Backup loop exited after %s"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_LBL_COMPLETE_WITH_WARNINGS="The backup process is now complete with warnings."
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_LBL_COMPLETE="The backup process is now complete."
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_HELP="<info>%command.name%</info> will take a backup with Akeeba Backup\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_DESC="Take a backup with Akeeba Backup"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_OPT_PROFILE="Profile number"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_OPT_DESCRIPTION="Short description for the backup record, accepts the standard Akeeba Backup archive naming variables"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_OPT_COMMENT="Longer comment for the backup record, provide it in HTML"
COM_AKEEBABACKUP_CLI_BACKUP_TAKE_OPT_OVERRIDES="Set up configuration overrides in the format \"key1=value1,key2=value2\""

COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_HEAD="Re-uploading Akeeba Backup record #%d"
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_LBL_PROGRESS="Trying to re-upload backup record '%s', part file #%s, fragment #%s. This may take a while."
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_LBL_COMPLETE="Re-upload of backup record '%s' is complete."
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_ERR_FAILED="Re-upload of backup record '%s' failed."
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_HELP="<info>%command.name%</info> will retry uploading a backup known to Akeeba Backup to the remote storage.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_DESC="Retry uploading a backup to the remote storage"
COM_AKEEBABACKUP_CLI_BACKUP_UPLOAD_OPT_ID="The id of the backup record to upload"

COM_AKEEBABACKUP_CLI_FILTER_DELETE_HEAD="Deleting %s filter “%s” of type %s from profile #%d"
COM_AKEEBABACKUP_CLI_FILTER_TYPE_DATABASE="database"
COM_AKEEBABACKUP_CLI_FILTER_TYPE_FILESYSTEM="filesystem"
COM_AKEEBABACKUP_CLI_FILTER_DELETE_ERR_UNKNOWN_ROOT="Unknown %s root '%s'."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_ONLY_PRO="Filters of the '%s' type are only available with Akeeba Backup Professional."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_ERR_FAILED="Could not delete filter '%s' of type '%s'."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_LBL_DELETED="Deleted filter '%s' of type '%s'."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_HELP="<info>%command.name%</info> will delete a filter value known to Akeeba Backup.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_FILTER_DELETE_DESC="Delete a filter value known to Akeeba Backup."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_OPT_FILTER="The filter name to delete"
COM_AKEEBABACKUP_CLI_FILTER_DELETE_OPT_ROOT="Which filter root to use. Defaults to [SITEROOT] or [SITEDB] depending on the fitler type."
COM_AKEEBABACKUP_CLI_FILTER_DELETE_OPT_FILTERTYPE="The type of filter you want to delete: files, directories, skipdirs, skipfiles, regexfiles, regexdirectories, regexskipdirs, regexskipfiles, tables, tabledata, regextables, regextabledata, extradirs, multidb"
COM_AKEEBABACKUP_CLI_FILTER_DELETE_OPT_PROFILE="The backup profile to use. Default: 1."

COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_HEAD="Adding %s filter “%s” of type %s to profile #%d"
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_ERR_FAILED="Could not add filter '%s' of type '%s'."
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_LBL_SUCCESS="Added filter '%s' of type '%s'."
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_HELP="<info>%command.name%</info> will set a file, folder or table exclusion filter to Akeeba Backup.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_DESC="Set an exclusion filter to Akeeba Backup."
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_OPT_FILTER="The filter target to add. This is the full path to a file/directory, a table name or a regular expression, depending on the filter type."
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_OPT_ROOT="Which filter root to use. Defaults to [SITEROOT] or [SITEDB] depending on the filter type."
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_OPT_FILTERTYPE="The type of filter you want to add: files, directories, skipdirs, skipfiles, regexfiles, regexdirectories, regexskipdirs, regexskipfiles, tables, tabledata, regextables, regextabledata"
COM_AKEEBABACKUP_CLI_FILTER_EXCLUDE_OPT_PROFILE="The backup profile to use. Default: 1."

COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_ERR_NEED_PRO="This feature requires Akeeba Backup Professional"
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_ERR_ALREADY_EXISTS="The database '%s' is already included. Delete the old inclusion filter before trying to add the database again."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_ERR_CANNOT_CONNECT="Could not connect to the database '%s'. Server reported '%s'. Use the --no-check option to continue anyway but be advised that your backup will most likely result in an error."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_ERR_FAILED="Could not include database '%s'."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_LBL_ADDED="Added database '%s'."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_HELP="<info>%command.name%</info> will add an additional database to be backed up by Akeeba Backup.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_DESC="Adds an additional database to be backed up by Akeeba Backup."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBDRIVER="The database driver to use: mysqli, pdomysql"
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBPORT="The database server port. Skip to use the driver\'s default."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBUSERNAME="The database connection username."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBPASSWORD="The database connection password."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBNAME="The database name."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_DBPREFIX="The common prefix of the database table names, allows you to change it on restoration."
COM_AKEEBABACKUP_CLI_FILTER_MULTIDB_OPT_CHECK="Check the database connection before adding the filter."

COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_ERR_EXISTS="The directory '%s' is already included with root '%s'. Delete the old inclusion filter before trying to add the directory again."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_ERR_FAILED="Could not add directory '%s'."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_LBL_SUCCESS="Added directory '%s'."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_HELP="<info>%command.name%</info> will add an additional off-site directory to be backed up by Akeeba Backup.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_DESC="Add an additional off-site directory to be backed up by Akeeba Backup."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_OPT_DIRECTORY="Full path to the off-site directory to add to the backup."
COM_AKEEBABACKUP_CLI_FILTER_INCLUDEFOLDER_OPT_VIRTUAL="The subfolder inside the backup archive where these files will be stored. This is a subfolder of the "virtual directory" whose name is set in the Configuration page. Skip to determine automatically."

COM_AKEEBABACKUP_CLI_FILTER_LIST_TITLE="List of Akeeba Backup filters matching your criteria"
COM_AKEEBABACKUP_CLI_FILTER_LIST_HELP="<info>%command.name%</info> will list filter values for an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_FILTER_LIST_DESC="Get the filter values known to Akeeba Backup."
COM_AKEEBABACKUP_CLI_FILTER_LIST_OPT_ROOT="Which filter root to use. Defaults to [SITEROOT] or [SITEDB] depending on the --target option. Ignored for --type=include. Tip: the filesystem and database roots are the "filter" column for --type=include. There are two special roots, [SITEROOT] (the filesystem root of the Joomla site) and [SITEDB] (the main database of the Joomla site)."
COM_AKEEBABACKUP_CLI_FILTER_LIST_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_FILTER_LIST_OPT_TARGET="The target of filters you want to list: fs (files and folders) or db (database)"
COM_AKEEBABACKUP_CLI_FILTER_LIST_OPT_TYPE="The type of filters you want to list: exclude, include or regex"
COM_AKEEBABACKUP_CLI_FILTER_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_LOG_GET_HELP="<info>%command.name%</info> will retrieve a log file from the output directory of the Akeeba Backup profile specified. Note: log files from other backup profiles or Akeeba Backup installations sharing the same output directory can also be retrieved.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_LOG_GET_DESC="Retrieve a log file known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_LOG_GET_OPT_PROFILE_ID="Log files in the output directory of this Akeeba Backup profile will be retrieved"
COM_AKEEBABACKUP_CLI_LOG_GET_OPT_LOG_TAG="The tag of the log file to retrieve"

COM_AKEEBABACKUP_CLI_LOG_LIST_TITLE="List of Akeeba Backup log files for output directory %s"
COM_AKEEBABACKUP_CLI_LOG_LIST_HELP="<info>%command.name%</info> will list all log files in the output directory of the Akeeba Backup profile specified. Note: log files from other backup profiles or Akeeba Backup installations sharing the same output directory will also be listed.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_LOG_LIST_DESC="Lists log files known to Akeeba Backup"
COM_AKEEBABACKUP_CLI_LOG_LIST_OPT_PROFILE_ID="Log files in the output directory of this Akeeba Backup profile will be listed"
COM_AKEEBABACKUP_CLI_LOG_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_OPTIONS_GET_ERR_INVALID_PROFILE="Could not find profile #%s."
COM_AKEEBABACKUP_CLI_OPTIONS_GET_ERR_NO_MULTIPLE="This command cannot return multiple values given the partial key prefix “%s”. Please supply they exact key name you want to retrieve. Use the akeeba:option:list command to see the available keys with the prefix %s."
COM_AKEEBABACKUP_CLI_OPTIONS_GET_ERR_INVALID_KEY="Invalid key “%s”."
COM_AKEEBABACKUP_CLI_OPTIONS_GET_HELP="<info>%command.name%</info> will get the value of a configuration option for an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_OPTIONS_GET_DESC="Gets the value of a configuration option for an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_OPTIONS_GET_OPT_KEY="The option key to retrieve"
COM_AKEEBABACKUP_CLI_OPTIONS_GET_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_OPTIONS_GET_OPT_FORMAT="Output format: text, json, print_r, var_dump, var_export."

COM_AKEEBABACKUP_CLI_OPTIONS_LIST_ERR_NO_SUCH_OPTION="No options found matching your criteria."
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_HELP="<info>%command.name%</info> will list the configuration options for an Akeeba Backup profile, including their titles.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_DESC="Lists the configuration options for an Akeeba Backup profile, including their titles"
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_OPT_FILTER="Only return records whose keys begin with the given filter."
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_OPT_SORT_BY="Sort the output by the given column: none, key, value, type, default, title, description, section"
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_OPT_SORT_ORDER="Sort order: asc, desc."
COM_AKEEBABACKUP_CLI_OPTIONS_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_OUT_OF_BOUNDS="Invalid value '%s': out of bounds."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_INVALID_BOOL="Invalid boolean value '%s': use one of 0, false, no, off, 1, true, yes or on.'"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_INVALID_ENUM="Invalid enumerated value '%s'. Must be one of %s."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_HIDDEN="Setting hidden option '%s' is not allowed."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_UNKNOWN_TYPE="Unknown type %s for option '%s'. Have you manually tampered with the option JSON files?"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_PROTECTED="Cannot set protected option '%s'. Please use the --force option to override the protection."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_ERR_GENERAL="Could not set option '%s'."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_LBL_SUCCESS="Successfully set option '%s' to '%s'"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_HELP="<info>%command.name%</info> will set the value of a configuration option for an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_DESC="Sets the value of a configuration option for an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_OPT_KEY="The option key to set"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_OPT_VALUE="The value to set"
COM_AKEEBABACKUP_CLI_OPTIONS_SET_OPT_PROFILE="The backup profile to use. Default: 1."
COM_AKEEBABACKUP_CLI_OPTIONS_SET_OPT_FORCE="Allow setting the value of protected options."

COM_AKEEBABACKUP_CLI_PROFILE_COPY_ERR_NOT_FOUND="Cannot copy profile %s; profile not found."
COM_AKEEBABACKUP_CLI_PROFILE_COPY_ERR_FAILED="Cannot copy profile #%s: %s"
COM_AKEEBABACKUP_CLI_PROFILE_COPY_LBL_SUCCESS="Copy successful. Created new profile with ID %s."
COM_AKEEBABACKUP_CLI_PROFILE_COPY_HELP="<info>%command.name%</info> will create a copy of an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_COPY_DESC="Creates a copy of an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_PROFILE_COPY_OPT_ID="The numeric ID of the profile to copy"
COM_AKEEBABACKUP_CLI_PROFILE_COPY_OPT_FILTERS="Include filters in the copy."
COM_AKEEBABACKUP_CLI_PROFILE_COPY_OPT_DESCRIPTION="Description for the new backup profile. Uses the old profile\'s description if not specified."
COM_AKEEBABACKUP_CLI_PROFILE_COPY_OPT_QUICKICON="Should the new backup profile have a one-click backup icon? Copies the old profile\'s setting if not specified."
COM_AKEEBABACKUP_CLI_PROFILE_COPY_OPT_FORMAT="The format for the response. Use JSON to get a JSON-parseable numeric ID of the new backup profile. Values: text, json"

COM_AKEEBABACKUP_CLI_PROFILE_CREATE_ERR_FAILED="Cannot create profile: %s"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_LBL_SUCCESS="Created new profile with ID %s."
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_HELP="<info>%command.name%</info> will create a new Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_DESC="Creates a new Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_OPT_DESCRIPTION="Description for the new backup profile. Default: “New backup profile”"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_OPT_QUICKICON="Should the new backup profile have a one-click backup icon? Default: 1"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_OPT_FORMAT="The format for the response. Use JSON to get a JSON-parseable numeric ID of the new backup profile. Values: text, json"
COM_AKEEBABACKUP_CLI_PROFILE_CREATE_LBL_NEW_PROFILE="New backup profile"

COM_AKEEBABACKUP_CLI_PROFILE_DELETE_ERR_DEFAULT="You cannot delete the default backup profile (#1)"
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_ERR_NOTFOUND="Cannot delete profile %s; profile not found."
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_ERR_FAILED="Cannot delete profile #%s: %s"
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_LBL_SUCCESS="Profile #%d has been deleted."
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_HELP="<info>%command.name%</info> will delete an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_DESC="Delete an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_PROFILE_DELETE_OPT_ID="The numeric ID of the profile to delete"

COM_AKEEBABACKUP_CLI_PROFILE_EXPORT_ERR_NOT_FOUND="Cannot export profile %s; profile not found."
COM_AKEEBABACKUP_CLI_PROFILE_EXPORT_HELP="<info>%command.name%</info> will exports an Akeeba Backup profile as a JSON string.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_EXPORT_DESC="Exports an Akeeba Backup profile as a JSON string"
COM_AKEEBABACKUP_CLI_PROFILE_EXPORT_OPT_ID="The numeric ID of the profile to modify"
COM_AKEEBABACKUP_CLI_PROFILE_EXPORT_OPT_FILTERS="Include the filter settings?"

COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_ERR_INVALID_JSON="Cannot process input; invalid JSON string or file not found."
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_ERR_GENERIC="Cannot import profile: %s"
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_LBL_SUCCESS="Successfully imported JSON as profile #%s"
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_HELP="<info>%command.name%</info> will import an Akeeba Backup profile from a JSON string.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_DESC="Imports an Akeeba Backup profile from a JSON string"
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_OPT_FILEORJSON="A path to an Akeeba Backup profile export JSON file or a literal JSON string. Uses STDIN if omitted."
COM_AKEEBABACKUP_CLI_PROFILE_IMPORT_OPT_FORMAT="The format for the response. Use json to get a JSON-parseable numeric ID of the new backup profile. Values: json, text"

COM_AKEEBABACKUP_CLI_PROFILE_LIST_HELP="<info>%command.name%</info> will list the Akeeba Backup backup profiles.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_LIST_DESC="Lists the Akeeba Backup backup profiles"
COM_AKEEBABACKUP_CLI_PROFILE_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_ERR_NOTFOUND="Cannot modify profile %s; profile not found."
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_ERR_GENERIC="Cannot modify profile #%s: %s"
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_LBL_SUCCESS="Profile #%s modified successfully."
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_HELP="<info>%command.name%</info> will modify an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_DESC="Modifies an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_OPT_ID="The numeric ID of the profile to modify"
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_OPT_DESCRIPTION="Description for the new backup profile. Uses the old profile\'s description if not specified."
COM_AKEEBABACKUP_CLI_PROFILE_MODIFY_OPT_QUICKICON="Should the new backup profile have a one-click backup icon? Copies the old profile\'s setting if not specified."

COM_AKEEBABACKUP_CLI_PROFILE_RESET_ERR_NOTFOUND="Cannot modify profile %s; profile not found."
COM_AKEEBABACKUP_CLI_PROFILE_RESET_ERR_GENERIC="Cannot reset profile #%s: %s"
COM_AKEEBABACKUP_CLI_PROFILE_RESET_LBL_SUCCESS="Profile #%s reset successfully."
COM_AKEEBABACKUP_CLI_PROFILE_RESET_HELP="<info>%command.name%</info> will resets an Akeeba Backup profile.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_PROFILE_RESET_DESC="Resets an Akeeba Backup profile"
COM_AKEEBABACKUP_CLI_PROFILE_RESET_OPT_ID="The numeric ID of the profile to modify"
COM_AKEEBABACKUP_CLI_PROFILE_RESET_OPT_FILTERS="Reset the filters?"
COM_AKEEBABACKUP_CLI_PROFILE_RESET_OPT_CONFIGURATION="Reset the configuration?"

COM_AKEEBABACKUP_CLI_SYSCONFIG_GET_ERR_CANNOT_FIND="Cannot find option “%s”."
COM_AKEEBABACKUP_CLI_SYSCONFIG_GET_HELP="<info>%command.name%</info> will get the value of an Akeeba Backup component-wide option.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_SYSCONFIG_GET_DESC="Gets the value of an Akeeba Backup component-wide option"
COM_AKEEBABACKUP_CLI_SYSCONFIG_GET_OPT_KEY="The option key to retrieve"
COM_AKEEBABACKUP_CLI_SYSCONFIG_GET_OPT_FORMAT="Output format: text, json, print_r, var_dunp, var_export."

COM_AKEEBABACKUP_CLI_SYSCONFIG_LIST_HELP="<info>%command.name%</info> will list the Akeeba Backup component-wide options.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_SYSCONFIG_LIST_DESC="Lists the Akeeba Backup component-wide options"
COM_AKEEBABACKUP_CLI_SYSCONFIG_LIST_OPT_FORMAT="Output format: table, json, yaml, csv, count."

COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_LBL_SETTING="Set component option “%s” to “%s”"
COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_HELP="<info>%command.name%</info> will set the value of an Akeeba Backup component-wide option.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_DESC="Sets the value of an Akeeba Backup component-wide option"
COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_OPT_KEY="The option key to set"
COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_OPT_VALUE="The option value to set"
COM_AKEEBABACKUP_CLI_SYSCONFIG_SET_OPT_FORMAT="Output format: text, json, print_r, var_dunp, var_export."

COM_AKEEBABACKUP_CLI_HEAD_MIGRATE="Migration from Akeeba Backup 8"
COM_AKEEBABACKUP_CLI_MIGRATE_COMMAND_DESC="Migrates the settings from Akeeba Backup 8"
COM_AKEEBABACKUP_CLI_BACKUP_MIGRATE_HELP="<info>%command.name%</info> will migrate the settings and backup archives from Akeeba Backup 8, if it's installed. WARNING: THIS WILL OVERWRITE ALL YOUR CURRENT SETTINGS WITHOUT ASKING FOR CONFIRMATION. This command is meant to be used by responsible adults only.\nUsage: <info>php %command.full_name%</info>"
COM_AKEEBABACKUP_CLI_MIGRATE_NOAB8="Akeeba Backup 8 is not installed on your site."

COM_AKEEBABACKUP_LBL_CPANEL_UPGRADE_FROM_AKEEBABACKUP8_HEAD="Migrate your settings from an older Akeeba Backup version"
COM_AKEEBABACKUP_LBL_CPANEL_UPGRADE_FROM_AKEEBABACKUP8_BODY="We detected that you have an older version of Akeeba Backup installed on your site. Click the button below to attempt an automatic import of your settings, backup history and backup archives stored in the default backup output directory. Please read the documentation carefully to understand the risks and limitations of this operation."
COM_AKEEBABACKUP_LBL_CPANEL_UPGRADE_FROM_AKEEBABACKUP8_BTN="Migrate settings"

COM_AKEEBABACKUP_LBL_CPANEL_UPGRADED_FROM_AKEEBABACKUP8_HEAD="You have already migrated your settings from an older Akeeba Backup version"
COM_AKEEBABACKUP_LBL_CPANEL_UPGRADED_FROM_AKEEBABACKUP8_BODY="You have already migrated your settings from an older version of Akeeba Backup. If you want to run the migration again click on “Migrate settings”. If you are satisfied with the migration click on “Show me what to uninstall” to open Joomla's ‘Extensions: Manage’ page to the old Akeeba Backup extension; you can then select it and click on Uninstall to remove it."
COM_AKEEBABACKUP_LBL_CPANEL_UPGRADED_FROM_AKEEBABACKUP8_NOTE="If the uninstallation of the old version of Akeeba Backup fails please do the following. First, install the latest version of Akeeba Backup 8. Then, install the latest version of Akeeba Backup for Joomla 4. Come back to this page and click on “Show me what to uninstall”. You will be able to uninstall it just fine. Please note that messages about FOF or FEF being unable to uninstall can be ignored; Akeeba Backup 8 will be uninstalled regardless of these messages."
COM_AKEEBABACKUP_LBL_CPANEL_UPGRADED_FROM_AKEEBABACKUP8_BTN="Show me what to uninstall"

COM_AKEEBABACKUP_UPGRADE="Settings migration"
COM_AKEEBABACKUP_UPGRADE_LBL_WARNING_STANDARD="This operation will overwrite all your existing settings and backup history."
COM_AKEEBABACKUP_UPGRADE_LBL_WARNING_INCOMPATIBLE_HEAD="Migration requirements are not met"
COM_AKEEBABACKUP_UPGRADE_LBL_WARNING_INCOMPATIBLE_BODY="We have not detected a compatible version of Akeeba Backup. If you try to run the migration now you may experience errors and / or data loss. Do not proceed unless you have been explicitly instructed to do so by our developers. Ignore this stern warning at your own risk and peril!"
COM_AKEEBABACKUP_UPGRADE_LBL_WARNING_ALREADY_RAN_HEAD="You have already migrated your settings"
COM_AKEEBABACKUP_UPGRADE_LBL_WARNING_ALREADY_RAN_BODY="You have already run the migration before. If you try to run the migration again you may experience errors and / or data loss. Do not proceed unless you have been explicitly instructed to do so by our developers. Ignore this stern warning at your own risk and peril!"
COM_AKEEBABACKUP_UPGRADE_LBL_WHAT_IT_DOES="Akeeba Backup for Joomla! will import configuration settings, backup profiles, backup history and <em>some</em> of the backup archives (those in <code>administrator/components/com_akeeba/backup</code>) from an older version of Akeeba Backup (7.x or 8.x) already installed on your site, overwriting all existing date. You should only use this feature the very first time you install Akeeba Backup for Joomla! to avoid data loss."
COM_AKEEBABACKUP_UPGRADE_LBL_REMEMBER_TO_UNINSTALL="Remember to uninstall the old version of Akeeba Backup after the migration is complete. Use the Joomla's sidebar menu item called “System”. Find the Manage panel and click on Extensions. Find and select the <em>Akeeba Backup package</em> extension of type “Package”. Then click on the Uninstall button in the toolbar."
COM_AKEEBABACKUP_UPGRADE_BTN_PROCEED="Proceed with the migration"
COM_AKEEBABACKUP_UPGRADE_LBL_SUCCESS="The settings migration completed successfully."
COM_AKEEBABACKUP_UPGRADE_LBL_FAIL="The settings migration failed to complete. You may have to manually import your backup profiles and / or transfer and import backup archives."